Online Calibration Method of LiDAR and Camera Based on Fusion of Multi-Scale Cost Volume
The online calibration algorithm for camera and LiDAR helps solve the problem of multi-sensor fusion and is of great significance in autonomous driving perception algorithms. Existing online calibration algorithms fail to account for both real-time performance and accuracy. High-precision calibratio...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-03-01
|
| Series: | Information |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2078-2489/16/3/223 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The online calibration algorithm for camera and LiDAR helps solve the problem of multi-sensor fusion and is of great significance in autonomous driving perception algorithms. Existing online calibration algorithms fail to account for both real-time performance and accuracy. High-precision calibration algorithms require high hardware requirements, while it is difficult for lightweight calibration algorithms to meet the accuracy requirements. Secondly, sensor noise, vibration, and changes in environmental conditions may reduce calibration accuracy. In addition, due to the large domain differences between different public datasets, the existing online calibration algorithms are unstable for various datasets and have poor algorithm robustness. To solve the above problems, we propose an online calibration algorithm based on multi-scale cost volume fusion. First, a multi-layer convolutional network is used to downsample and concatenate the camera RGB data and LiDAR point cloud data to obtain three-scale feature maps. The latter is then subjected to feature concatenation and group-wise correlation processing to generate three sets of cost volumes of different scales. After that, all the cost volumes are spliced and sent to the pose estimation module. After post-processing, the translation and rotation matrix between the camera and LiDAR coordinate systems can be obtained. We tested and verified this method on the KITTI odometry dataset and measured the average translation error of the calibration results to be 0.278 cm, the average rotation error to be 0.020°, and the single frame took 23 ms, reaching the advanced level. |
|---|---|
| ISSN: | 2078-2489 |