In-situ embedding of isotropic conductive adhesives in FFF: A single-step approach to additively manufactured electronics
Multimaterial additively manufactured electronics (AME) describes the technology of printing conductive and dielectric materials within a single processing system. Commonly used conductive materials, such as metallic nano particle inks, require a subsequent sintering process. This research introduce...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2025-07-01
|
| Series: | Materials & Design |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S0264127525006355 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Multimaterial additively manufactured electronics (AME) describes the technology of printing conductive and dielectric materials within a single processing system. Commonly used conductive materials, such as metallic nano particle inks, require a subsequent sintering process. This research introduces a novel approach by embedding an isotropic conductive adhesive (ICA) during the fused filament fabrication (FFF) process, involving the dispensing of an ICA into a printed channel and the subsequent deposition of molten thermoplastic on top. Utilizing the heat of the molten thermoplastic, this approach enables the fabrication of low-resistance conductor paths in a single process step. Employing a full factorial design of experiments (DOE), the process parameters effects on the ICAs conductivity and the thermoplastic temperature profile were investigated. The maximum conductivity of 8.27×105 S/m was achieved for the conductor path embedded with a liquefier temperature of 300 °C, an embedding speed of 100 mm/sec, and a deposition height of 300 µm. While liquefier temperature and print speed affect the thermoplastics temperature profile, the deposition height affects the cross-sectional geometry of the conductor path, altering its surface-to-volume ratio. This study successfully demonstrates the in-situ fabrication of low-resistance conductor paths in a single process step by utilizing an ICA. |
|---|---|
| ISSN: | 0264-1275 |