Rheological and CO2 sequestration properties of alkali-activated gangue-based backfill slurry: Effect of temperature by Qiang Guo, Jixiong Zhang, Meng Li, Binbin Huo, Yang Zhao, Zhangjie Yin, Shihao Xing, Xinghui Fu

“…The enhanced formation of carbonation products leads to a reduction in the specific surface area and pore volume, an increase in cluster structure, and a denser microstructure, resulting in a decrease in the rheological properties of AGS. …”
Get full text

Multi-scale characterization of tight carbonate rocks based on digital cores by Changsheng Wang, Changsheng Wang, Lili Tian, Lili Tian, Chuanrui Sun, Chuanrui Sun, Yuwei Deng, Yuwei Deng, Ying Zhou, Ying Zhou, Xin Nie, Xin Nie

“…The characterization of carbonate microstructure is of great significance for the evaluation of carbonate oil and gas resources. …”
Get full text

Enhanced mechanical properties of Al0.43CoCrFeNi2.1 high entropy alloy fabricated through complex shear flow casting: Experiment and MD simulation by Simeng Jiang, Yaya Zhao, Weijie Fan, Weiyang Xie, Yanlin Wang, Xiaohua Chen, Zidong Wang

“…Various characterization techniques were employed to analyze the microstructural differences between the two samples. …”
Get full text

Research advances and development trends of wire-based laser directed energy deposition additive manufacturing technology by YUAN Yucheng, SONG Jun, LUO Jiajie, LI Xiangru, SONG Bo, SHI Yusheng

“…Based on this， this paper provides a detailed introduction to the current research status of W-LDED technology from three aspects： process parameter optimization， deposition quality analysis， and microstructural composition control. It analyzes the impact of different parameters on forming quality and manufacturing stability， proposes optimization strategies， summarizes the current application scenarios of W-LDED technology， and presents ideas for the future development trends of this technology，including material innovation and the development of multifuctional composites，research on forming mechanisms，establishing predictive models for process-defect-microstructure property relationships， new hybrid additive/subtractive manufacturing methods，and the development of large-scale，high-precision，and multifuctional equipment.…”
Get full text

Experimental Study on Physical-Mechanical Properties of Expansive Soil Improved by Multiple Admixtures by Binhui Ma, Kai Cai, Xing Zeng, Zhuo Li, Zhiyong Hu, Qiunan Chen, Chengbin He, Bingchu Chen, Xiaocheng Huang

“…Further scanning electron microscopy (SEM) tests were carried out to analyze the microstructure of the improved expansive soil and explore the improvement mechanism of the multiadmixture. …”
Get full text

Dynamic Mechanical Properties and Deformation Mechanisms of Lightweight High-Strength TWIP Steel by Jia Yang, Xiyue Liu, Yu Tang, Shuxin Bai, Yicong Ye, Manchao He, Min Xia

“…X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD) were employed to analyze the microstructural evolution and fracture mechanisms of tensile specimens. …”
Get full text

Estudio del comportamiento mecánico de un sistema recubierto mediante simulación computacional del ensayo de rayado//Mechanical Behavior study of a coated system by computer simula... by Eduardo A. Pérez Ruiz, Luis Iván Negrín Hernández, Roberto Martins de Souza

“…The results obtained depend of the variables including mechanical properties and geometry of indenter, loading, displacement, material properties in the system as hardness, elastic modulus, microstructure, roughness surface, thickness, among others, which are indicated in ASTM C1624 / 05. …”
Get full text

Impact of Nanomaterials on the Mechanical Strength and Durability of Pavement Quality Concrete: A Comprehensive Review by Ashmita Mohanty, Dipti Ranjan Biswal, Sujit Kumar Pradhan, Malaya Mohanty

“…This review systematically analyzes the influence of these nanomaterials on PQC, identifies key research gaps, and emphasizes the need for large-scale field validation to enhance their practical applicability.…”
Get full text

Clinical and spectral-domain optical coherence tomography findings and changes in new-onset macular edema after silicone oil tamponade by Jun-Xing Bai, Xin Zheng, Xiao-Qing Zhu, Xiao-Yan Peng

“…SD-OCT enabless monitoring of macular microstructure changes in SiO-treated eyes, and macular cysts’ occurrence can indicate the oil removal need.…”
Get full text

High-temperature Creep Behavior of Oxide Dispersion Strengthened HT9 Steel at 650 ℃ Based on Small Sample Testing by CHENG Shuo1, LI Shijiang1, GONG Aoxiang1, ZHAO Lei2, TONG Zhenfeng1

“…The creep fracture morphology and microstructure of the samples were characterized and tested by using micro-scale characterization techniques. …”

One-Part Alkali-Activated Slag/Fly Ash for Soft Soil Stabilization: Freeze-Thaw Durability Assessment and Mechanism Elucidation by Li Liu, Mengjie Yuan, Xiyao Zheng, Jun Wu

“…Mass loss, unconfined compressive strength (UCS), and pH value were conducted to assess soil deterioration and structural integrity under freeze-thaw conditions. Additionally, microstructure analysis was conducted using scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDS) and X-ray diffraction (XRD) to analyze hydration product formation and internal structure characteristics. …”
Get full text

预热处理方式对亚麻籽油体乳液稳定性的影响Effect of preheating treatments on the stability of flaxseed oil body emulsion by 郑瑞，崔楠楠，周大勇，刘惠麟 ZHENG Rui, CUI Nannan, ZHOU Dayong, LIU Huilin

“…The oil body and slurry were mixed in a mass ratio of 4∶ 6, and then subjected to shear to obtain the flaxseed oil body emulsion. The appearance, microstructure, particle size, water distribution, storage stability, environmental stability (pH, salt ion concentration, temperature stability) and oxidation stability of the oil body emulsion were measured to explore the influences of preheating treatments on the stability of the flaxseed oil body emulsion were analyzed. …”
Get full text

Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms by Manfred Wiessner, Ernst Gamsjäger

“…The exactness of these hyperplanes is analyzed by cross-validation. The machine learning algorithms used in this work are valuable tools to separate different microstructures based on their diffractograms. …”
Get full text

Mechanical and transportation characteristics of gangue geopolymer aggregate slurry by Shibin ZHU, Xiaodong WANG, Boqiang WU, Chen XU, Xiaoyu HU, Ganggang XU, Le HAN, Yuehong ZHANG

“…By controlling aggregate particle size and content, uniaxial compressive strength tests, low-field nuclear magnetic resonance (LF-NMR), and scanning electron microscopy (SEM) were employed to analyze the mechanical properties, pore distribution, and microstructure of the cured slurry. …”
Get full text

Preparation of cementitious materials from biomass power plant ash and the application of cementitious materials in backfill material by Keji LI, Tingye QI, Guorui FENG, Haochen WANG, Linfei WANG, Junjie HE, Siyuan CHENG, Tian QIU

“…X-ray diffraction and scanning electron microscopy are employed to analyze the hydrothermally synthesized precursors and the low-temperature calcined clinker, investigating the effects of hydrothermal synthesis and low-temperature calcination on the phase development and microstructure of the novel cementitious material. …”
Get full text

Research on frost resistance and life prediction of fly ash manufactured sand concrete under negative temperature curing by Li Gong, Tao Ran, Yanzhong Bu, Tianle Xu, Xuehao Zhao

“…This study designed manufactured sand concrete with different FA content (0 %, 10 %, 15 %, 20 %) and conducted freeze-thaw cycle tests on concrete cured under −5°C and 20°C to investigate the impact of FA dosage on the frost resistance and microstructure of manufactured sand concrete in high-altitude cold regions. …”
Get full text

Interfacial Charge Transfer Mechanism and Output Characteristics of Identical-Material Triboelectric Nanogenerators by Lin-Xin Wu, Shi-Jia Ma, Meng-Jie Li, Xian-Lei Zhang, Gang Zheng, Zheng Liang, Ru Li, Hao Dong, Jun Zhang, Yun-Ze Long

“…Atomic force microscopy (AFM) was used to analyze the microstructure of the interface, and it was found that the existence of the surface tip structure would enhance the electron loss. …”
Get full text

Quantitative ultrasound imaging reveals distinct fracture-associated differences in tibial intracortical pore morphology and viscoelastic properties in aged individuals with and wi... by Carolin Dehnen, Angela Galindo, Paula Hoff, Paula Hoff, Oliver Palme, Lukas Maurer, Kay Raum, Edgar Wiebe

“…Cortical Backscatter (CortBS) ultrasound, a radiation-free technique, non-invasively analyzes cortical bone’s viscoelastic and microstructural properties. …”
Get full text

Progress in phase field research of dead lithium in lithium batteries by Jing LIU, Huiyi CHEN, Huiyu LIU, Shu LI

“…This study focuses on analyzing these mechanisms and influencing factors from the perspective of the phase field, which is a powerful computational method to simulate microstructure evolution, providing insights into the complex dynamics of lithium deposition and the conditions and influencing factors for the formation of lithium dendrites and dead Lithium. …”
Get full text

Investigation of the features of the structural organization of inulin and analysis of the possibilities of its application by V. A. Byzov, V. V. Litvyak, N. D. Lukin, V. V. Shilov, Yu. F. Roslyakov, J. K. Irmatova

“…The goal is to study the features of the structural organization of inulin and analyze the possibilities of its use. The object and methods of the research. …”
Get full text