Influence of manufacturing shrinkage and microstructural features on the strength properties of carbon fibers/PEEK composite material by Evgeny Lomakin, Boris Fedulov, Alexey Fedorenko

Get full text

Influence of manufacturing shrinkage and microstructural features on the strength properties of carbon fibers/PEEK composite material by Evgeny Lomakin, Boris Fedulov, Alexey Fedorenko

Get full text

A Voronoi-diagram analysis of the microstructures in bulk-molding compounds and its correlation with the mechanical properties by B. Bertoncelj, K. Vojisavljevic, J. Rihtarsic, G. Trefalt, M. Huskic, E. Zagar, B. Malic

“…The experimental results are compared to modelled microstructures. The derived microstructural descriptors allow us to correlate the fiber weight content and the degree of fiber distribution homogeneity with the mechanical properties of EGF-reinforced composites. …”
Get full text

Effects of Cryogenic Treatment on the Friction and Wear Properties andMicrostructure of TC4 Titanium Alloy by ZHANG Liang, YU Xiao-jian

“…At present, the mechanism of the influence of cryogenic treatment on the mechanical properties and microstructure of TC4 titanium alloy has not been analyzed clearly. …”
Get full text

Microstructural Topology Optimization of Constrained Layer Damping on Plates for Maximum Modal Loss Factor of Macrostructures by Zhanpeng Fang, Lei Yao, Shuxia Tian, Junjian Hou

“…The density-based topology optimization is adopted to find optimal microstructures of viscoelastic materials. The design sensitivities of modal loss factor with respect to the design variables are analyzed and the design variables are updated by Method of Moving Asymptotes (MMA). …”
Get full text

Effect of Solution and Aging Heat Treatment on the Microstructure and Mechanical Properties of Inconel 625 Deposited Metal by Yingdi Wang, Yunhai Su, Zhiyong Dai

Get full text

Microstructure and properties of joint of Al/Cu welded by resistance element welding with an auxiliary gasket of Ni by Dongsheng Cui, Jing Wang, Ranfeng Qiu, Hongxin Shi, Lipeng Yan

“…Abstract A rivet of aluminum and auxiliary gasket of nickel were adopted to weld A1060 aluminum plate and T2 copper plate using resistance element welding. The interfacial microstructure was analyzed and the tensile shear load of the joint was tested. …”
Get full text

Microstructure and Mechanical Properties of 30CrMnSiA Parts Repaired by Laser Cladding by HU Shuzeng, CHENG Donghai, CHAO Bingxuan, YING Junlong, WANG De, WANG Jun, WANG Wenqin

“…30CrMnSiA steel is extensively utilized in specialized tooling components， which frequently experience fatigue fractures and other damage mechanisms under cyclic stress during service.In this work，the laser cladding technology was adopted，and the microstructure and mechanical properties were analyzed based on process experiments.The optimal parameters were selected to perform laser repair on the damaged fork-shaped part of 30CrMnSiA， and its fatigue life was tested by a fatigue testing machine.Results showed that the microstructure within the repair layer was dense.The bonding interface between the repair layer and the base material was a typical metallurgical bonding，and no defects such as cracks occurred.The strength of the weld seam was higher than that of the base metal， and the tensile fracture was basically at the base metal.Besides，the specimen achieved a fatigue cycle count of 606 501，representing a 21.3%improvement in fatigue life compared to standard parts， meeting all operational requirements for specialized tooling components.…”
Get full text

Effect of Zn Content on Microstructure and Corrosion Resistance of 7010 Aluminum Alloy Used for Vehicle Lightweight by LI Yan-fen, CHENG Cai-xia, YANG Tie-zao

“…In order to improve the corrosion resistance of 7010 aluminum alloy for vehicle lightweight, 7010 alloy was modified by adding Zn with different dosage.After modification, the microstructure of modified alloy was analyzed by SEM and EDS, and the corrosion resistance were evaluated by immersion test in NaCl + HNO3 +KNO3 corrosive medium.Results showed that the second phase particles in the alloy structure showed ellipsoidal shape and belonged to AlZnMgCu phase.The increase of Zn addition caused more significant alloying processes occurred, which formed more residual second phase in the matrix, and the grain boundary precipitated phase possessed more continuous distribution and smaller size.When the Zn content increased, a higher content of Zn and Mg was produced in the precipitation phase at the grain boundary of each alloy.After corrosion medium immersing test, numerous corrosion pits with small size were generated on the surface of the sample, and many exfoliating layers with large size appeared in the surface area of the alloy with 10% Zn content, performing very serious corrosion.When the Zn content increased from 6% to 10%, the corrosion resistance of the alloy decreased gradually.…”
Get full text

Enhancing metallurgical and mechanical properties of friction stir lap welding of aluminum alloys by microstructure reconstruction by Kun Gao, Zhenlong Zhang, Guangdong Wang, Xiaojun Sun, Yingyue Zhang

“…The mechanical properties and microstructural characteristics are compared and analyzed between the FSLW&FSP joint fabricated by FSLW and FSP and the FSLW joint. …”
Get full text

Effect of deformation temperature on microstructure and corrosion properties of hot-compressed 347H stainless steel by Qiushuang Wang, Ruidong Li, Junchen Li

“…The effects of dynamic recrystallization (DRX), grain size, and grain boundary (GB) on the corrosion behavior of the material were analyzed by microstructure detection. It is found that 347H stainless steel undergoes a valley stage of corrosion properties when deformed near 1050 ℃ with a constant strain rate. …”
Get full text

On the microstructure and corrosion behavior of Fe-28.5Ni steel subjected to severe plastic deformation by Melika Jalali, Hamid Reza Jafarian, Ali Shanaghi, Ali Reza Eivani

“…The research examines how the ARB as a severe plastic deformation technique alters the microstructure and corrosion resistance of this alloy. …”
Get full text

Microstructure and Cerebral Blood Flow within White Matter of the Human Brain: A TBSS Analysis. by Stéphanie Giezendanner, Melanie Sarah Fisler, Leila Maria Soravia, Jennifer Andreotti, Sebastian Walther, Roland Wiest, Thomas Dierks, Andrea Federspiel

“…For this purpose, CBF and its relation to anisotropic diffusion was analyzed across subjects on a voxel-wise basis with tract-based spatial statistics (TBSS) and also across white matter tracts within subjects.…”
Get full text

Study on Adhesive and Microstructure Properties of Rice Husk Ash-Based Geopolymer Hybrid Alkyd Coating by Mohd Náim Abdullah, Faizal Mustapha, Mazli Mustapha, Tabrej Khan, Tamer A Sebaey

Get full text

Quantitative Microstructure of Multiphase Al-Zn-Si-(Mg) Coatings and Their Effects on Sacrificial Protection for Steel by Guilherme Adinolfi Colpaert Sartori, Blandine Remy, Tiago Machado Amorim, Polina Volovitch

“…Three materials with different Al/Zn ratios and Mg content were analyzed. The quantitative microstructure allowed us to describe their corrosion behaviors in a chloride environment and understand their ranking for sacrificial protection of steel in accelerated corrosion tests. …”
Get full text

Exceptional creep resistance of a directionally solidified superalloy: temperature-dependent evolution of microstructure and dislocations by Yunpeng Fan, Xinbao Zhao, Yu Zhou, Yuan Cheng, Shuli Zeng, Quanzhao Yue, Wanshun Xia, Yuefeng Gu, Ze Zhang

“…This study systematically analyzed the microstructure, grain boundary, and dislocation evolution of a novel directionally solidified superalloy with excellent creep resistance under different conditions and the alloy outperformed first-generation single-crystal superalloys in creep resistance. …”
Get full text

Mechanical and Microstructural Properties of Bio-composite Produced from Recycled Polystyrene/chicken Feather Biochar by Adewale Adeniyi, Kingsley Iwuozor, Ebuka Emenike, Comfort Adeyanju, Samuel Ogunniyi

“…The composites were then analyzed using FTIR, SEM-EDX, and hardness tests. SEM examination demonstrated that the biochar was distributed unevenly throughout the matrix. …”
Get full text

Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber by Xue-lei Duan, Jing-shuang Zhang

“…The compressive and tensile strengths, deformation characteristics, failure mode, and microstructure of soil-cement modified with fly ash and polypropylene fiber were analyzed. …”
Get full text

Microstructural control of corrosion behavior of Cu–3Fe–5Zn alloy via annealing by Yanggang Wang, Yanbin Jiang, Zhou Li

Get full text

Effect of homogenizing heat treatment on the microstructure of new low-chromium alumina-forming austenitic steels by Mohammad Mehdi Khalvan, Seyed Mohammad-Ali Boutorabi, Mehdi Diavandari

“…The results show that adding up to 4 wt % aluminum leads to a fully austenitic microstructure, while increasing the aluminum content to 8 wt % results in a dual-phase ferritic-austenitic microstructure. …”
Get full text