Analytical Solution of a Circular Opening considering Nonuniform Pressure and Its Engineering Application by Peng Wu, Yanlong Chen, Liang Chen, Xianbiao Mao, Wei Zhang

“…The results show that many factors have important impact on the response of the surrounding rock, including lateral pressure coefficient, dilation coefficient, buried depth, and Young’s modulus attenuation. Under nonuniform pressure condition, the distribution of plastic zone and deformation around the opening show obvious nonuniform characteristic: with the increasing of lateral pressure coefficient, the range of plastic zone and deformation decrease gradually at side, while they increase at roof and floor, and the location of the maximum value of support and surrounding rock response curve transfers from side to roof. …”
Get full text

Stress Uniformity Analyses on Nonparallel End-Surface Rock Specimen during Loading Process in SHPB Tests by Pu Yuan, Qin-yong Ma, Dong-dong Ma

“…When end-surface nonparallelism is 0.10%, stress equilibrium time achieves its lowest value whatever Young’s modulus is. Hence, end-surface nonparallelism of the rock specimen is suggested to be controlled within 0.10% when conducting SHPB tests.…”
Get full text

Mechanical Properties of Multi-Layer Woven E-Glass/Epoxy in Variable Fiber-Mat Directions by Saif Aldeen Ghafel H., Nasri Salh M. Namer, Abdul Jabbar H. Ali

“…The direction of the fibers with (5^°) of composite has the highest strength, Young's modulus, and 0.2% proof yield stress when compared with (0^°,15^°,30^°,45^°) and pure epoxy. …”
Get full text

Microencapsulation of L-carvone and hexyl salicylate in carnauba wax, candelilla wax and beeswax by melt dispersion method by Qun Huang, Zhibing Zhang

“…The mechanical characterisation of individual wax microspheres by a micromanipulation technique is firstly reported here and the values of Young's modulus of wax microspheres were determined by fitting the experimental force versus displacement with the Hertz model. …”
Get full text

Analytical solution for the problem of pure bending of orthotropic micropolar plate by Damjan Jurković, Gordan Jelenić, Sara Grbčić Erdelj

“…When analysing the problem of pure bending of a plate, it can be noticed that, for cylindrical bending, a spatial problem collapses into a plane-strain problem. For such a boundary-value problem of the Cosserats' continuum, three engineering parameters are required: Young’s modulus, Poisson’s ratio and the characteristic length for bending. …”
Get full text

A Damage Constitutive Model for the Effects of CO2-Brine-Rock Interactions on the Brittleness of a Low-Clay Shale by Qiao Lyu, Xinping Long, P. G. Ranjith, Jingqiang Tan, Yong Kang, Wenbin Luo

“…Based on the results, physical and chemical reactions during the imbibition cause reductions of shales’ peak axial strength (20.79%~61.52%) and Young’s modulus (13.14%~62.44%). Weibull distribution-based constitutive model with a damage threshold value of 0.8 has better agreement with the experiments than that of the power function distribution-based constitutive model. …”
Get full text

Investigation of the Acoustic Properties of Chemically Impregnated Kayu Malam Wood Used for Musical Instrument by Md. Faruk Hossen, Sinin Hamdan, Md. Rezaur Rahman

“…The acoustic properties such as specific dynamic Young’s modulus (Ed/γ), internal friction (Q−1), and acoustic conversion efficiency (ACE) of wood were examined using free-free flexural vibration. …”
Get full text

Effect of Chemical Treatment on Physical, Mechanical and Thermal Properties of Ladies Finger Natural Fiber by S. I. Hossain, M. Hasan, Md. N. Hasan, A. Hassan

“…The tensile strength and Young's modulus values were found to be increased after chemical treatment. …”
Get full text

On question of determining characteristics of porous rubber for wave sound proofing by Yu. A. Burian, G. S. Russkikh

“…Using the experimental values of the Young’s modulus and Poisson’s coefficients for an elastic medium, the magnitude of the bulk modulus of the sample are determined…”
Get full text

Comprehensive Study on Elastic Moduli Prediction and Correlation of Glass and Glass Ceramic Derived from Waste Rice Husk by Chee Sun Lee, Khamirul Amin Matori, Sidek Hj. Ab Aziz, Halimah Mohamed Kamari, Ismayadi Ismail, Mohd Hafiz Mohd Zaid

“…Physical properties used in this study are density and molar volume while the theoretical elastic moduli of the samples produced were obtained using direct calculation of theoretical model compared with the experimental elastic moduli obtained by acquiring ultrasonic velocities using ultrasonic pulse-echo technique. Values of experimental elastic moduli including longitudinal modulus (L), shear modulus (S), Young’s modulus (E), bulk modulus (K), and Poisson’s ratio (σ) were compared with theoretical model calculated using Rocherulle’s model. …”
Get full text

Studying the Effect of ZnO on Physical and Elastic Properties of (ZnO)x(P2O5)1−x Glasses Using Nondestructive Ultrasonic Method by Khamirul Amin Matori, Mohd Hafiz Mohd Zaid, Hock Jin Quah, Sidek Hj. Abdul Aziz, Zaidan Abdul Wahab, Mohd Sabri Mohd Ghazali

“…Longitudinal modulus, shear modulus, bulk modulus, Young’s modulus, Poisson’s ratio, and Debye temperature (θD) were derived from both data of velocities and respective density of all of the samples. …”
Get full text

Enhancing the performance of polyfarnesene-based bio-rubbers with surface-modified cellulose nanocrystals and nanofibers by Luis Valencia, Ilse Magaña, Marisol Gálvez, Francisco Javier Enríquez-Medrano, Teresa Córdova, Cristal Cabrera, José Luis Olivares Romero, Héctor Ricardo López-González, Ramón Díaz de León

“…Mechanical tests focused on tensile strength, Young’s modulus, and elongation at break showed that incorporation of 12 wt% modified MCNF into the PFA1 and PFA2 increased tensile strength by 56% and 22%, and Young’s modulus by 27% and 58%, respectively (compared to the neat rubber matrix), while elongation at break decreased with increasing MCNF content. …”
Get full text

Failure Mechanisms of Structural Bamboo Using Microstructural Analyses by Mutaz K. Chahrour, Md. Akter Hosen, Yingxin Goh, Teong Yen Tong, Soon Poh Yap, Mohamed Amine Khadimallah

“…In addition, nanoindentation tests were carried out on different cell structures to articulate the hardness and Young’s modulus. The elastic modulus of the fibre cell walls is three times that of the parenchyma cell walls, yet the hardness values are comparable. …”
Get full text

Evaluating the Influence of Drying Shrinkage on Cracking Resistance of Massive Self-Compacting Concrete with Blast Furnace Slag Using Finite Element Method by Benson Kipkemboi, Shingo Miyazawa

“…The restraint stress experiment results of the self-compacting concrete beam under drying conditions are compared with those of similar concrete beam models obtained from 3D FEM analysis. The value of the reduction coefficient for Young’s modulus of elasticity was proposed to consider the effect of stress relaxation due to creep in concrete. …”
Get full text

Experimental Investigation on the Correlation between Dynamic Ultrasonic and Mechanical Properties of Sandstone Subjected to Uniaxial Compression by Yunjiang Sun, Jianping Zuo, Yue Shi, Zhengdai Li, Changning Mi, Jinhao Wen

“…Additionally, the dynamic Young’s modulus and dynamic Poisson’s ratio during loading are obtained, and the negative values of the Poisson’s ratio occur at the initial compression stage. …”
Get full text

Mathematical model and nanoindentation properties of the claws of Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae) by Longhai Li, Wei Sun, Ce Guo, Huafeng Guo, Liu Lili, Ping Yu

“…For the dry samples, the hardness and Young's modulus were 0.197 ± 0.074 GPa and 1.105 ± 0.197 GPa, respectively, whereas the respective values for the wet samples were both lower at 0.071 ± 0.030 GPa and 0.693 ± 0.163 GPa. …”
Get full text

Synthesis and Properties of Bionanocomposites of Polyhydroxybutyrate-Polylactic Acid Doped with Copper and Silver Nanoparticles by Galo Cárdenas-Triviño, Nelson Linares-Bermúdez, Mario Núñez-Decap

“…Regarding tensile tests, PLA/PHB/nanoparticle (NP) blends showed higher Young modulus value action improving exponentially some properties and they can act as a powerful complementary component even in small amounts. …”
Get full text

Anisotropic Elasticity, Spin–Orbit Coupling, and Topological Properties of ZrTe₂ and NiTe₂: A Comparative Study for Spintronic and Nanoscale Applications by Yasaman Fazeli, Zahra Nourbakhsh, Shahram Yalameha, Daryoosh Vashaee

“…The present work investigates the interfacial and atomic layer-dependent mechanical properties, SOC-entailing phonon band structure, and comprehensive electron-topological–elastic integration of ZrTe₂ and NiTe₂. The anisotropy of Young’s modulus, Poisson’s ratio, and shear modulus are analyzed using density functional theory with the TB-mBJ approximation. …”
Get full text

Residual Stresses Characterisation of Hard Ceramic Coating (SiC-5wt%Al2O3) Using X-Ray Diffraction Technique by Samah R. Hassan, Mudhar. A. Al-Obaidi, Hamid M. Mahan, Konovalov Sergey

“…To resolve this challenge, X-ray elastic parameters are deployed instead of Poisson ratio (ν) and Young's modulus (E) values. The value of the residual stresses for these coatings calculated is compressive residual stresses of (-594.029 MPa). …”
Get full text

Effect Of Magnesium Perchlorate Content on the Mechanical, Thermal Stability, and Dielectric Properties of Plasticized PMMA/PVC-g-PMMA Electrolytes by Nguyen Thi Kim Dung, Nguyen Thi Dieu Linh, Do Quang Tham, Nguyen Thuy Chinh, Man Minh Tan, Tran Thi Mai, Nguyen Thi Thu Trang, Do Minh Thanh, Nguyen Quang Tung, Thai Hoang

“…With increasing the Mg salt concentration, Young’s modulus and tensile strength of the GPBEs strongly decreased. …”
Get full text