-
181
A New Theoretical View of Rockburst and Its Engineering Application
Published 2018-01-01“…Traditionally, rockburst is considered as a dynamic phenomenon of sudden destruction of coal/rock mass. In this study, rockburst is treated as an event process rather than a phenomenon. …”
Get full text
Article -
182
Lower Bound Solution of Foundation Bearing Capacity beneath Strip Footing Based on Parabolic Mohr Failure Criterion
Published 2020-01-01“…Finally, the reliability of the proposed method is verified by some rock foundation loading tests.…”
Get full text
Article -
183
Comparison of Aerodynamic Effects on the Commonwealth Advisory Aeronautical Research Council (CAARC) Tall Building Model Tested in Two Wind Tunnel Laboratories
Published 2025-01-01“…The inaccurate measurement of static pressure leads to these results. To address this issue, an indirect measurement method was employed to correct the static pressure results and reduce the error in the mean wind pressure coefficient to within 10%. …”
Get full text
Article -
184
Study on the Creep Damage Characteristics of Shale under the Combined Action of Osmotic Pressure and Disturbance Load
Published 2021-01-01“…In the method of staged loading, the rock uniaxial compression perturbation creep test under static axial pressure, different perturbation frequencies, and different seepage water pressures was carried out, and the creep characteristics of shale under the combined action of perturbation and seepage were studied. …”
Get full text
Article -
185
Mechanical Behavior and Acoustic Emission Characteristics of Sandstone Under Different Cyclic Loading and Unloading Disturbance Rates
Published 2025-01-01“…ABSTRACT The frequency of dynamic disasters is escalating in deep coal mining, with an increasing number of disasters induced by the combined static and dynamic loading. To investigate the mechanical behavior of deep sandstone under mining, cyclic disturbance, uniaxial cyclic loading, and unloading tests with equal amplitude were conducted at four different disturbance rates on the basis of static loading. …”
Get full text
Article -
186
Investigation of Strong Strata Behaviors in the Close-Distance Multiseam Coal Pillar Mining
Published 2021-01-01“…Furthermore, the results of the study indicated that the main factors affecting the strong strata behaviors were the static stress concentration caused by the overlying coal pillars and the dynamic disturbance caused by the fracturing and slipping of the overlying coal pillars and roof under the influence of mining. …”
Get full text
Article -
187
Effect of Structure Parameter on Stress Distribution of Double Helical Tooth Synchronous Timing Belt
Published 2017-01-01“…Under the same dislocation coefficient,the tooth root stress of the double helical tooth synchronous timing belt with spiral angle of 30° has minimum value,during which the maximum tooth root stress is the smallest.…”
Get full text
Article -
188
Experimental Study on Bending Stress of Spur Gear with Tooth Profile Modification and Finite Element Verification
Published 2018-01-01“…The study of static and dynamic meshing characteristics of gears has high theoretical value for improving gear carrying capacity and dynamics performance. …”
Get full text
Article -
189
Research of Internal Excitation of Helical Gear Meshing Transmission
Published 2018-01-01“…The finite element method is used to analyze the static and dynamic contact process of helical gears to get the magnitude and distribution of tooth contact stress. …”
Get full text
Article -
190
Inverse Modeling of Nonlinear Artificial Muscle Using Polynomial Parameterization and Particle Swarm Optimization
Published 2020-01-01“…This inverse modeling of PAM implemented a simple approach, but it should be useful in control design applications such as rehabilitation robotics, biomedical system, and humanoid robots.…”
Get full text
Article -
191
STEADFAST: Psychotherapeutic Intervention Improves Postural Strategy of Somatoform Vertigo and Dizziness
Published 2015-01-01“…Seventeen SVD patients took part in the study. The effects of PTI on SVD were evaluated with quantitative static posturography. …”
Get full text
Article -
192
Rockburst mechanism and prevention technology for wide coal pillar return airway
Published 2024-11-01“…(c) Implementation of drilling relief with a large diameter in the field effectively alleviates the issue of the return airway adjacent to the wide coal pillar, causing the stress peaks to shift deeper into the rock mass, this significantly reduces the risk of rockburst occurrence.…”
Get full text
Article -
193
Charging path optimization in mobile wireless rechargeable sensor networks
Published 2023-12-01“…The wireless power transfer technique is promising in solving the energy bottleneck of sensor nodes in wireless sensor networks, which can thus prolong the network lifetime or even maintain sustainable network operations.Most existing works focused on optimizing the static chargers’ deployment or mobile chargers’ charging path for static sensor nodes with fixed sensor node positions, ignoring the scenario with mobile sensor nodes.Thus, design and optimize the charging path of a mobile charger was studied for dynamic wireless sensor networks with mobile sensor nodes, to maximize the charging utility within a finite time horizon, that is, the charger can encounter as more sensor nodes as possible in a limited time and charge them.Notice that the mobile charger may stop to simultaneously charge multiple nodes within its charging range during its charging tour.The proposed charging path optimization problem was proven to be an APX-hard problem.Then, based on the constructed directed acyclic graph using discretization method, a layer-wise pruning algorithm based on the backtracking method was proposed.The proposed algorithm took the solution generated by the greedy algorithm as the benchmark and searched the optimal charging path under a fixed time division by layer-wise pruning.Simulation results show that the proposed algorithm can effectively improve the charging utility .…”
Get full text
Article -
194
Effect of Blade Outlet Angle on Unsteady Hydrodynamic Force of Closed-Type Centrifugal Pump with Single Blade
Published 2014-01-01“…For this reason, the static pressure around the impeller fluctuates greatly when the impeller is rotating, and not only the radial thrust but also the axial thrust shows large fluctuations. …”
Get full text
Article -
195
Study on Single Event Upset and Mitigation Technique in JLTFET-Based 6T SRAM Cell
Published 2024-01-01“…After verifying SRAM circuit for its functionality, the stability parameters, read static noise margin (RSNM), write static noise margin (WSNM), read/write delay, and power consumption are evaluated. …”
Get full text
Article -
196
Research Progress on Failure Probability Analysis of Earth-Rockfill Dams Based on Random Field Models
Published 2024-10-01“…This paper summarized domestic and international application examples of random field models in failure probability analysis of earth-rockfill dams from four aspects: seepage, stability, static, and dynamic analysis, including obtaining more accurate seepage, stability, and static dynamic calculation results, analyzing the sensitivity of material parameters of earth-rockfill dams, and playing an important role in parameter inversion problems and establishing dam monitoring models. …”
Get full text
Article -
197
Analysis of Energy Dissipation Characteristics of Damaged Sandstone under Impact Load
Published 2021-01-01“…Finally, the energy dissipation characteristics of damaged rock under impact load are analyzed. The results show that the damage factor of sandstone increases with the increase of the upper limit of stress after cyclic static loading. …”
Get full text
Article -
198
Finite Element Analysis for Estimating Strength and Fatigue of the APM Structure
Published 2025-01-01“…The finite element analysis is implemented to figure out the key results in both static and fatigue load analysis as follows: maximum displacements, maximum stresses and minimum factors of safety in static load, and minimum fatigue life cycles. …”
Get full text
Article -
199
Dynamic Characteristic Analysis of Asymmetric Helical Gear with a Small Number of Teeth based on LS-DYNA
Published 2017-01-01“…The static and dynamic bending stress of tooth root in the whole meshing process of the helical gear pair is compared,and the influence of operating parameters on the bending strength is analyzed. …”
Get full text
Article -
200
Seismic Stability of Subsea Tunnels Subjected to Seepage
Published 2014-01-01“…Strength reduction method and ADINA software are adopted to study the stability of submarine tunnel structures subjected to seepage and earthquake under different seawater depths and overlying rock strata thicknesses. First, the excess pore water pressure in the rock mass is eliminated through consolidation calculation. …”
Get full text
Article