-
1341
Influence of Y–Bi–Co oxide doping on electrical performance of ZnO varistors based on simulation analysis
Published 2025-01-01“…Abstract ZnO varistors doped with Y2O3, Bi2O3, and Co2O3 were analyzed for electrical performance, microstructure, phase composition, and elemental distribution using electrical performance testing, scanning electron microscopy, X‐ray diffraction, and energy dispersive spectroscopy tests. …”
Get full text
Article -
1342
Multiscale strength formation mechanism and stress-strain behavior of alkali-activated metakaolin concrete considering the effect of alkaline solution/binder ratio
Published 2025-07-01“…Experiments are designed with seven different AL/B (0.55–0.85), and the effects of different AL/B on the macro-mechanical properties and microstructure of AAMK are analyzed by means of tests such as nuclear magnetic resonance (NMR), uniaxial compression, scanning electron microscopy (SEM), and X-ray diffraction (XRD). …”
Get full text
Article -
1343
Mechanism of Textural Reorganization in Silkworm Chrysalis and Pea Protein Extrusion: Structural Evolution and Quality Characteristic
Published 2025-03-01“…Scanning electron microscopy (SEM) revealed that the addition of SCP changed the microstructure of the product, resulting in a looser, more porous sample overall. …”
Get full text
Article -
1344
-
1345
Optimization of Enzymatic Hydrolysis Process, Structural Characterization and Antioxidant Activity Analysis of Gastrodia elata Polysaccharide
Published 2025-02-01“…Their dissolution rate, monosaccharide composition, relative molecular weight, functional groups, and microstructure were analyzed before and after enzymatic hydrolysis. …”
Get full text
Article -
1346
Analysis of tensile properties in tempered martensite steels with different cementite particle size distributions
Published 2024-11-01“…In this study, the tensile properties of tempered martensite steel were analyzed using a combination of an experimental approach and deep learning. …”
Get full text
Article -
1347
Flow stress-strain curves and dynamic recrystallization behavior of high carbon low alloy steels during hot deformation
Published 2025-03-01“…Compared to the initial microstructure, the average grain size at 1050 oC-0.1 s−1 decreased by 79.4%, while the aspect ratio of the grain shape increased by only 9.1%. …”
Get full text
Article -
1348
Preparation and Properties of Fly Ash and Sintering Red Mud-based Geopolymers
Published 2024-10-01“…The raw materials and geopolymers prepared at different pretreatment methods were analyzed and tested using XRF, XRD, ICP-OES, and SEM-EDS. …”
Get full text
Article -
1349
Investigating the role of starch in the structuring of meat alternatives from mung bean and pea protein isolates via heat-induced gelation
Published 2024-10-01“…The protein functionality of mungbean protein isolate (MBPI) and pea protein isolate (PPI) were analyzed. In addition, the effects of constituent composition on the physicochemical properties of meat alternatives were studied using RSM.ResultsThe protein content exhibited an elevation with increased levels of MBPI and PPI in 15:15 ratio. …”
Get full text
Article -
1350
Evaluation of the Characteristics of Digital Light Processing 3D-Printed Magnesium Calcium Phosphate for Bone Regeneration
Published 2025-04-01“…In this study, we prepared MCP samples with five different molar ratios via DLP 3D printing. We analyzed the physicochemical properties of these five groups, including phase compositions and microstructures, which were examined using X-ray diffraction and scanning electron microscopy, respectively. …”
Get full text
Article -
1351
Modification of bitumen with polyether-based polyurethanes containing different hard segments
Published 2025-04-01“…Then, the high and low temperature properties and resistance to permanent deformation of modified bitumen binders were investigated through dynamic shear rheometer (DSR) test, bending beam rheometer (BBR) test and multiple stress creep recovery (MSCR) test. Finally, the microstructure and molecular movement were analyzed by fluorescence microscopy (FM), atomic force microscopy (AFM) and differential scanning calorimetry (DSC). …”
Get full text
Article -
1352
Development and characterization of carbon-based conductive pastes with high mechanical integrity under bending stress for room-temperature printable electronics
Published 2025-02-01“…By varying the ratios of G/CB (1 to 4), carbon filler content (11.6–20%), and polymer content (1.5–7%), 48 different formulations were fabricated and further analyzed to determine their electrical conductivity as films. …”
Get full text
Article -
1353
Effect of accelerated carbonation on fine cement paste aggregates
Published 2024-12-01“…Regarding the parameters of the accelerated carbonation environment analyzed, for a higher w/c ratio in the original model aggregate, higher initial water content was necessary for the carbonation process to be efficient. …”
Get full text
Article -
1354
Liquid-induced heat treatment strategy for eliminating anisotropy of IN718 fabricated by laser powder bed fusion
Published 2025-02-01“…The intergranular liquid film is introduced to facilitate the columnar-to-equiaxed transition of grains in IN718 alloy fabricated by LPBF. Microstructures and mechanical properties parallel and perpendicular to the build direction have been analyzed. …”
Get full text
Article -
1355
Primary research on expression of kerogen in Longmaxi Shale and its adsorption characteristics
Published 2023-10-01“…The adsorption mechanism and characteristics of CH4 in kerogen of Longmaxi Shale are analyzed by magnetic levitation weight experiment, molecular simulation methods of the Grand Canonical Monte Carlo(GCMC), and Molecular Dynamics(MD). …”
Get full text
Article -
1356
Study on the Influence of Window Openings on Seismic Performance of Stone Walls of Tibetan and Qiang Dwellings
Published 2024-11-01“…The findings indicate that “X”-shaped cracks at the corners of the window openings and extending to the surrounding areas are the primary damage characteristics. The unique microstructure of yellow clay and schist leads to the faster appearance of wall cracks. …”
Get full text
Article -
1357
Oxidative stability and physical properties of model cream-type O/W emulsions structured with candelilla wax and stored at room temperature
Published 2025-08-01“…The emulsion's primary, secondary, and total degrees of lipid oxidative changes and the microstructure, rheological properties, and physical stability were examined. …”
Get full text
Article -
1358
Enhancement of physicochemical properties and antioxidant activity of carob-based dark chocolate as a cocoa powder substitute
Published 2025-12-01“…Five DC formulations were produced by varying the carob-powder-to-cocoa powder ratio and were analyzed for pH, fat, protein, polyphenol, and flavonoid contents, antioxidant activity (IC₅₀), texture, color, particle size, melting behavior, polymorphism, microstructure, and sensory acceptability. …”
Get full text
Article -
1359
Effect of Mulberry Powder Addition on the Quality and Antioxidant Capacity of Steamed Bread
Published 2024-09-01“…The impact of varying amounts of mulberry powder on the color difference, texture, microstructure, and antioxidant effects of fermented dough and steamed bread was measured, and the correlation between dough characteristics and steamed bread quality was also analyzed. …”
Get full text
Article -
1360
Influence of laser absorptivity of CuCr0.8 substrate surface state on the characteristics of laser directed energy deposition inconel 718 single track
Published 2024-11-01“…Substrate surface roughness, laser absorptivity, molten pool morphology, and microstructure were characterized, and the mechanisms of laser absorptivity change and the different LDED processes were analyzed. …”
Get full text
Article