-
521
Severe Accident Simulation of the Laguna Verde Nuclear Power Plant
Published 2012-01-01“…The LVNPP model was developed using RELAP/SCDAPSIM code. The lack of cooling water after the LOCA gets to the LVNPP to melting of the core that exceeds the design basis of the nuclear power plant (NPP) sufficiently to cause failure of structures, materials, and systems that are needed to ensure proper cooling of the reactor core by normal means. …”
Get full text
Article -
522
Efficiency of lithium bromide absorption chiller with multi-stage absorption and generation processes with associated mass flow
Published 2021-06-01“…A comparative analysis of the cycle understudy with the sample cycle (one-stage cycle) LBWAC is carried out. Despite the lower values of the coefficient of performance (COP), the cycle under study provides a doubling of the cooling capacity of the machine, at the same flow rate of the heating source, which is an advantage when the flow rate of the heating source is limited. …”
Get full text
Article -
523
Effects of Thermodynamics on the Concurrent Accretion and Migration of Gas Giants in Protoplanetary Disks
Published 2024-12-01“…The thermodynamics effect is modeled with a thermal relaxation timescale using a <inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><mi>β</mi></semantics></math></inline-formula>-cooling prescription. Our results indicate that radiative cooling has a substantial effect on the accretion and migration processes of the planet. …”
Get full text
Article -
524
INVESTIGATION OF INFLUENCE OF REGIMES OF THERMAL PROCESSING ON STRUCTURE AND MECHANICAL CHARACTERISTICS OF HOT-ROLLED TUBES, PRODUCED OF STEEL 32G2
Published 2011-11-01“…Investigations on influence of heating temperature, cooling regimes and steady temperature on structure and mechanical characteristics of hot-rolled pipes, produced of steel 32G2, are carried out.…”
Get full text
Article -
525
Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs)
Published 2022-12-01“…Finally, age-hardening was done at 180ºC temperature for 4 hours and then the samples were cooled under room temperature. Heat treated hybrid composites were subjected to evaluate the hardness, tensile, and wear behavior. …”
Get full text
Article -
526
Residual Strain Monitoring and Dynamic Characteristics of Hybrid Hollow Square Tube with Metal–FRP–Metal Sandwich Walls
Published 2022-01-01“…The results showed that the damping of the hybrid HST is 586% higher than that of the steel HST, while the hybrid HST has a lower first natural frequency (4.6% reduction) and mass (15.9% weight reduction). The influence of co-cure temperature and cooling rate on the size and state of the residual strains is analyzed, which might be helpful to guide the manufacturing of sandwich structures in machine tools. …”
Get full text
Article -
527
Effect of adding concentrated myofibrillar proteins of silver carp (Hypophthalmichthys molitrix) on the qualitative and nutritional characteristics of pasta
Published 2024-09-01“…In addition, the swelling index showed an increasing trend, displaying the effect of concentrated myofibrillar protein on the elevated water absorption rate and water retention capacity during the cooking processes. Conclusion: Given the results of sensory analysis with chemical characteristics and quality characteristics of cooking the pasta, it can be concluded that enrichment with up to 10% concentrated myofibrillar fish proteins makes no difference compared to the control group, while enhancing the desired characteristics of the final product.…”
Get full text
Article -
528
MECHANICAL CHARACTERISTICS OF INDUSTRIAL TYPES OF STEEL AT HARDENING OF INGOTS AND SLUGS
Published 2005-08-01“…The analysis of possibility of the fire cracks arising is carried out on the basis of existing data on changing of mechanical characteristics of industrial steel grades at high temperatures (in the processes of hardening and cooling in ingots and slugs). …”
Get full text
Article -
529
Exploring the Status of Preference, Utilization Practices, and Challenges to Consumption of Amaranth in Kenya and Tanzania
Published 2022-01-01“…Most people consumed these vegetables because they were affordable and available or because of circumstance of lacking other foods. Regarding cooking, final taste was mostly considered rather than nutritional attribute. …”
Get full text
Article -
530
Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History
Published 2014-01-01“…Firstly, components and working principle of TSTM were introduced. …”
Get full text
Article -
531
Performance of Ecological Pervious Concrete Prepared with Sandstone/Limestone-Mixed Aggregates
Published 2023-01-01“…The compressive test, water permeability test, cooling test, evaporation test, alkaline test, and scanning electron microscope (SEM) tests were carried out with qualified compressive strength as the indicator to determine the optimum sandstone-to-limestone volume ratio for the ecological pervious concrete. …”
Get full text
Article -
532
Supercritical CO2 Brayton Cycle Design for Small Modular Reactor with a Thermodynamic Analysis Solver
Published 2020-01-01“…Optimal cycle efficiencies of 40.48% and 35.9% can be achieved for the recompression Brayton cycle and simple Brayton cycle under water-cooled condition. …”
Get full text
Article -
533
The Empire of Beasts Then and Now: Political Cartoons and New Trends in Victorian Animal Studies
Published 2021-06-01“…Non-human animals were not just used for rhetorical purposes: beasts provided their very bodies to fund and fuel imperial projects, carried administrators and armies across and into remote spaces, and instilled fear and fascination in colonized and colonizers alike. …”
Get full text
Article -
534
RESEARCH OF INFLUENCE OF THE HIGH-SPEED THERMAL PROCESSING REGIMES ON STRUCTURE AND MECHANICAL PROPERTIES OF PIPE STEEL 32G2
Published 2012-02-01“…Researches on influence of high-speed heating temperature, regimes of cooling and temperature of abatement on structure and mechanical properties of pipe steel 32G2 are carried out. …”
Get full text
Article -
535
UCN Source at an External Beam of Thermal Neutrons
Published 2015-01-01“…The principal idea consists in installing a helium UCN source into an external beam of thermal or cold neutrons and in surrounding this source with a solid methane moderator/reflector cooled down to ~4 K. …”
Get full text
Article -
536
The Relationship between Nasal Carriage of Staphylococcus aureus and Surgical Site Infections in a Hospital Center in Morocco
Published 2021-01-01“…Of these, 57.14% of MRSA colonized patients developed an infection of the surgical site and 42.85% showed no sign of SSI, while for patients colonized by MSSA, 16.67% developed SSI and 83.33% showed no sign of SSI. …”
Get full text
Article -
537
Estimation of Surface Heat Flux and Surface Temperature during Inverse Heat Conduction under Varying Spray Parameters and Sample Initial Temperature
Published 2014-01-01“…An experimental study was carried out to investigate the effects of inlet pressure, sample thickness, initial sample temperature, and temperature sensor location on the surface heat flux, surface temperature, and surface ultrafast cooling rate using stainless steel samples of diameter 27 mm and thickness (mm) 8.5, 13, 17.5, and 22, respectively. …”
Get full text
Article -
538
Investigation and Assessment of the CFD for Horizontal Flow in the VHTR Core
Published 2017-01-01“…A nuclear power station using gas as a cooling medium has attracted so much attention because it offers high efficiency and greater safety. …”
Get full text
Article -
539
Mixed Convection in a Double Lid-Driven Wavy Shaped Cavity Filled with Nanofluid Subject to Magnetic Field and Internal Heat Source
Published 2023-01-01“…The bottom wall is wavy shaped and isothermally cooled as the vertical walls while the top wall is kept adiabatic. …”
Get full text
Article -
540
DEGENERATIVE SCOLIOSIS: A CASE REPORT
Published 2019-12-01“…Background: Scoliosis in adults is a spinal deformity in adult patients with a Cobb angle of more than 10° in the coronal plane. …”
Get full text
Article