Characterization of deposited plasma spray NiCrAlCoY2O3 coating layers on AlMg1 alloy substrates by Darko Veljić, Časlav Lačnjevac, Marko Rakin, Darko Bajić

“…In this paper, analyzed are the effects of the plasma spray distance on the microstructure and mechanical properties of the NiCrAlCoY2O3 coating layers deposited at atmospheric pressure. …”
Get full text

Effects of different mineral admixtures on the properties of magnesium potassium phosphate cement mortar by Shaokun Ma, Ruifeng Yang, Zhao Lu, Hu Lu, Weihang Zhao, Hongqi Chen, Meilin Liu

“…In this paper, the mechanical properties and microstructure of MKPC with mineral admixtures including fly ash (FA), silica fume (SF) and steel slag (SSP) were investigated and compared. …”
Get full text

Tribocorrosion Behavior of Laser-Cladded FeCrBSi Medium-Entropy Alloy Coatings by WANG Yanfang, ZHANG Yunpeng, CAO Chenjie, LIU Yanle, WANG Yunxuan, SHI Zhiqiang

“…Marine oil and gas engineering equipment suffers significant damage due to seawater corrosion and mechanical wear.Medium-entropy alloys， with their combined wear and corrosion resistance， are considered ideal materials for surface protective coatings.In this study， a FeCrBSi medium-entropy alloy coating was prepared on the surface of 316L stainless steel via laser cladding technology.The microstructure and tribocorrosion coupling behavior of the cladded layer were analyzed using X-ray diffraction (XRD)， metallographic microscopy and electrochemical corrosion and tribological tester.Results showed that the cladding layer consisted of dual-phase FCC and BCC solid solutions.The cladded zone was primarily composed of dendritic structures， while the bonding zone exhibited planar crystals.The average hardness of the FeCrBSi medium-entropy alloy coating reached 939 HV0.2， approximately 4.4 times that of the 316L stainless steel substrate.As the applied frictional load increased， the coefficient of friction of the coating decreased， with average values ranging from 0.2 to 0.5.The maximum wear volume was 0.052 mm3， indicating a significant improvement in wear resistance compared to the substrate.Electrochemical testing in a 3.5%(mass fraction) NaCl solution demonstrated superior corrosion resistance compared to 316L stainless steel， as indicated by a self-corrosion potential of -0.05 V and a corrosion current density of 1.45×10－7 A/cm2.Under the combined effect of frictional load and externally applied corrosion potential， both the average current density and wear volume increased with increasing potential， while the friction coefficient decreased.A synergistic interaction between corrosion and wear was observed.Notably， corrosion-induced wear contributed over 92.5%to the total material loss， demonstrating its dominant role.…”
Get full text

Multi-component (Ti-Zr-Cr-Nb)N coatings’: structure and properties by D.K. Yeskermessov, G.K. Uazyrkhanova, S.V. Plotnikov

“…Theoretical and experimental studies show that the chemical composition, microstructure and mechanical properties of coatings are based closely on deposition parameters (the working gas pressure and bias potential on the substrate). …”
Get full text

Experimental study of polyurethane-cement composite reinforcing talik beneath subgrade in permafrost regions: Exothermic characteristics, durability and micro-mechanism by Fujun Niu, Yuru Wang, Ziyi Wang, Zekun Ding, Minghao Liu

Get full text

Laser powder bed fusion of AlN and ZrN reinforced AlSi10Mg matrix composites: Effect of wettability and volume fraction on microstructure and mechanical properties by V.S. Suvorova, L.V. Fedorenko, S.N. Zhevnenko, B.O. Zotov, V.Yu. Egorov, D.D. Zherebtsov, D.S. Suvorov, B.B. Khaydarov, K.Yu. Kotyakova, A.A. Nepapushev, I.A. Kovalev, D.O. Moskovskikh, S.V. Chernyshikhin

“…The wettability of AlN and ZrN by pure Al and AlSi10Mg melts was investigated, and the phase composition and microstructure of the bulk composites, as well as the hardness and tensile strength, were studied. …”
Get full text

Synergistic enhancement of microstructure and properties in 304/TC4 cold metal transfer joints via laser pre-melting of FeCoNiCr medium-entropy alloys by Xiaobin Zhang, Yunbo Qian, Yibo Zhang, Pengfei Zhao, Shuwang Bian, Wenlong Zhang, Kanglin Ke, Bangfu Zhang, Xiaohui Zheng, Qiwei Yuan

“…To address the challenges of metal material repair and joining in the extreme environments specific to aerospace applications, this study conducted cold metal transfer welding of TC4 titanium alloy and 304 stainless steel by laser pre-melting FeCoNiCr medium-entropy alloy (MEA) onto TC4 surfaces. The microstructure and mechanical properties of the welded joints were comprehensively analyzed using optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), nanoindentation, electron backscatter diffraction (EBSD), transmission electron microscopy, and tensile testing. …”
Get full text

Effect of unequal channel angular pressing on microstructure and mechanical properties of Mg–Zn–Y–Mn–Ti magnesium alloy enhanced by lamellar LPSO phase and spherical W phase... by Jianqiang Hao, Li Zhao, Jinshan Zhang, Weili Cheng

“…Next, a mold was self-made according to the optimized parameters and the pressing experiments were carried out under the conditions of the pressing ratio of 9, the pressing speed of 1 mm/s and the pressing temperature of 350 °C, 400 °C and 450 °C to analyze its variations in microstructure and mechanical properties. …”
Get full text

Effect of Phase Structure on the Properties of Additively Manufactured NiTi Alloy Based on Molecular Dynamics Simulation by Tianxiang Zhao, Jiankang Huang, Huayu Zhao, Rui Xiang, Xueping Song, Ding Fan

Get full text

Engineering behavior and geotechnical challenges of sulfate-rich soils in Astana by Nazerke Sagidullina, Alfrendo Satyanaga, Jong Kim, Sung-Woo Moon

Get full text

Effect of keyhole on plasticity-evolved behaviors of thick Ti–6Al–4V laser-arc hybrid welded joint by Long Lin, Tao Yang, Jiang Yu, Bo Li, Lin Li, Minxuan Huang

Get full text

Effect of Deformation of Ti-3Al-8V-6Cr-4Zr-4Mo Alloy under Varying Thermo-Mechanical Conditions on its Microstructure and Deformation Behavior by S. Tomasik, A. Łukaszek-Sołek, T. Śleboda, Ł. Lisiecki

“…This paper analyses the impact of thermomechanical processing history on the microstructure and thermomechanical behavior of Ti-3Al-8V-6Cr-4Zr-4Mo titanium alloy. …”
Get full text

Probing deformation mechanisms of CoCrFeNiMn0.75Cu0.25 highentropy alloy after thermo-mechanical treatment using in situ EBSD investigation by Wujing Fu, Jingwei Ren, Guohua Fan, Xuewen Li, Yongjiang Huang

“…In-situ electron backscatter diffraction (EBSD) characterization was conducted on the 1073K and 1273K annealed samples to analyze microstructural evolution during tensile deformation. …”
Get full text

Le couple interactif texte / phrase dans l'histoire de la langue française by Sabine Lehmann

“…The concept of genre is an important parameter for the analysis of macro- and microstructure of a text. Our study shows that the textual structures evolution is related to the syntactic level and appears in the increasing complexity of thematic structure sets in Middle French. …”
Get full text

Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites by M. Ravikumar, Rudra Nail

“…Reinforcements were added in the range of 0 - 3 wt. %. The microstructure study, tensile and compression strength of the developed hybrid Metal Matrix Composites have been analyzed and examined. …”
Get full text

Formation of bainite below martensite start temperature in quenching low carbon steel by Zolotorevsky Nikolay, Belikova Yulia, Petrov Sergey, Zisman Alexander

Get full text

Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites by M. Ravikumar, Rudra Nail

“…Reinforcements were added in the range of 0 - 3 wt. %. The microstructure study, tensile and compression strength of the developed hybrid Metal Matrix Composites have been analyzed and examined. …”
Get full text

Comparison of Interfaces Between In Situ Laser Beam Deposition Forming and Electron Beam Welding for Thick-Walled Titanium Alloy Structures by Pingchuan Yang, Fei Li, Zongtao Zhu, Hui Chen

“…The surface morphology, microstructural characteristics, and mechanical properties of both joint types were comprehensively analyzed using stereomicroscopy, scanning electron microscopy (SEM), microhardness and tensile strength testing, and electron backscatter diffraction (EBSD) techniques. …”
Get full text

Pressure Drop Process as a Pretreatment for Enhancing Rehydration of Adzuki Beans (<i>Vigna angularis</i>) by Suyeon Lee, Sangoh Kim, Seokwon Lim

Get full text

Effect of Cr content on the structure and corrosion properties of (FeCoNi)0.75Cu0.25-xCrx high entropy alloys in 1 M H2SO4 by Y. Heidari, Kh. Gheisari, M. Yeganeh

“…The present paper studies the influence of Cr addition on the structure, microstructure, and corrosion properties of (FeCoNi)0.75Cu0.25-xCrx (x = 0, 0.05, 0.1, 0.15, 0.2, 0.25) high entropy alloys fabricated by vacuum arc melting. …”
Get full text