An Experimental Study of The Properties of Mild Steel Micro Particle Reinforced Epoxy Matrix Composites by Stephen Durowaye, Kolawole Alonge, Itunuoluwa Adebisi, Abdulsalam Joki-Lasisi, Emmanuel Omotuyi

“…. % of mild steel microparticles were used in the reinforcement of epoxy resin matrix to produce polymer composites by stir casting technique. The microstructure of the composites was examined by employing a scanning electron microscope (SEM). …”
Get full text

Formulation and characterisation of protein-rich custard-like soft food intended for the elderly with swallowing difficulties by Yuxin Qin, Christopher Pillidge, Bernie Harrison, Benu Adhikari

“…This study developed protein-rich custard-type soft foods for elderly with dysphagia and evaluated the impact of milk protein content (3.9 % to 8.9 %) on the physicochemical properties of the formulations. …”
Get full text

Structure, Corrosion Resistance and Wear Resistance of Low Bias Magnetron Sputtering TiAlN Films on AZ31 Mg Alloy by CAO Hui, ZHANG Fa, GUO Yu - li

“…Aiming at the two problems of non - corrosion and non - wear resistance of magnesium alloy, TiAlN thin film was prepared on AZ31 Mg alloy by DC magnetron sputtering with bias control applied to the substrate. The microstructure of the films was studied by means of XRD and SEM, and the corrosion resistance and wear resistance of the films were evaluated by means of electrochemical workstation and pin type friction and wear testing machine. …”
Get full text

Experimental Study on the Novel Interface Bond Behavior between Fiber-Reinforced Concrete and Common Concrete through 3D-DIC by Yujie Yuan, Ming Li, Abduqader S. S. Alquraishi, Hongye Sun

“…The three-dimensional digital image correlation technique (3D-DIC) and scanning electron microscope were adopted to evaluate the variation of specimen surface strain distributions and microstructure of fiber-reinforced concrete and bond interface between new-to-old concrete. …”
Get full text

Synthesis, Characterization, and Photocatalytic Activity of Cu-Doped MgO Nanoparticles on Degradation of Methyl Orange (MO) by Mebrihit Fissaha Gebreaneniya, Goitom Gebreyohannes Berhe, Tesfamariam Teklu

“…The crystal size of undoped MgO and Cu-doped MgO nanoparticles is 13.04 nm and 12.08 nm, respectively. The SEM microstructure of pure MgO showed higher agglomeration than the Cu-doped MgO nanoparticles. …”
Get full text

Enhancement in the Electrocatalytic and Optoelectronic Performance of Cost-Effective Counter Electrode VO2 for Dye-Sensitized Solar Cell (DSSC) by Varsha Yadav, Rahul Bhatnagar, Upendra Kumar

“…The utilization of a field emission scanning electron microscope (FESEM) that is equipped with an energy dispersive X-ray spectrum reveals a dense microstructure characterized by a uniform distribution of vanadium (V) and oxygen (O) across the whole surface. …”
Get full text

Industrial byproducts in concrete: A state-of-the-art review by Karan Moolchandani

“…SF, a byproduct of silicon alloy production, refines the microstructure, reduces permeability by 40 %, and increases early-age compressive strength by 30–35 %. …”
Get full text

Effect of Transglutaminase Cross-Linked Rapeseed Protein on Cake Quality by XIONG Wenfei, ZHU Shuxin, LU Shanshan, YAO Yijun, WANG Lifeng

“…Herein, the effectiveness of the application of TG-crosslinked rapeseed protein in sponge cake was comprehensively evaluated by analyzing the apparent morphology, microstructure, color, texture, water status, starch crystallinity and flavor. …”
Get full text

Exploring the effect of friction stir welding parameters on the strength of AA2024 and A356-T6 aluminum alloys by Ibrahim Sabry

“…This work focuses on examining the mechanical and microstructure characteristics of Alloys made of high-strength aluminium, AA2024, and A356-T6, using the Friction Stir Welding (FSW) process. …”
Get full text

Collagen architecture in triple negative breast cancer. by Zoë Dinkel, Adam Baker, Alannah Akins, Kylie L King, Matthew Harrington, Deborah Kunkel, Zhi Gao, Tong Ye, Heather Dunn

“…This study evaluated collagen properties in TNBC samples collected from different racial groups to determine the presence of variance in matrix architecture. …”
Get full text

Analysis of crystallization kinetics and shape memory performance of PEG-PCL/MWCNT based PU nanocomposite for tissue engineering applications by M. Zakizadeh, M. Nourany, M. Javadzadeh, P. Y. Wang, H. Shahsavarani

“…The results indicated an increase in Avrami exponent (n) from 1.43 to 3.11, and crystallization half-time (t0.5) decreased from 6.16 to 2.67 minutes for crystallization temperature (Tc) of –25 °C, attributed to the effect of PCL grafts on PUs’ microstructure. In addition, the results of cell viability, evaluated by HFF cells, proved a proper cytocompatibility. …”
Get full text

Steel Chips as a Raw Material for MEX by Catarina Duarte Batista, Maria Teresa Freire Vieira

“…The 3D objects resulting from chip powders had a refined microstructure, showing an increase of 15% in the microhardness when compared with the those resulting from commercial powders.…”
Get full text

Drop-Weight Impact Tests on Engineered Cementitious Composites heated to 500 oC by Raad A. Al-Ameri, Mustafa Özakça, Esra Eylem Karataş, M Tolga Göğüş, A. Hamza Tanrıkulu

“… Despite that concrete is a fire-resisting construction material, its microstructure suffers significant chemical and physical changes when subjected to temperatures higher than 400 oC. …”
Get full text

Impact of Pumice Substitution on Mortar Properties: A Case Study on Mechanical Performance and XRD Analysis by Pablo Julián López-Gonzalez, Rodrigo Vivar-Ocampo, Humberto Raymundo González-Moreno, Oscar Moreno-Vazquez, Efrén Meza-Ruíz, Sergio Aurelio Zamora-Castro, David Reyes-González, Joaquin Sangabriel-Lomeli

“…This research examines the mechanical behavior and microstructural features of alternative mortars in which pumice acts as a partial cement replacement. …”
Get full text

Effect of Nitriding on Mechanical Properties and Sulfide Stress Corrosion Resistance of Forged Supermartensitic Stainless Steel UNS S41426 by L. F. Guedes, R. R. M. de Sousa, E. M. Souza, J. A. C. Velasco, M. Cindra-Fonseca, S. S. M. Tavares

“…The effects of the microstructure were evaluated by X-ray diffraction and scanning electron microscopy. …”
Get full text

Effect of Hawthorn Powder on Physical, Functional, and Sensory Characteristics of Set-Type Yogurt by Jingjing Wang, Zeyuan Kang, Lifei Tang, Wenpei Qiu, Yuxin Wang, Tao Zhang, Daodong Pan, Maolin Tu

“…Plant powders have exhibited great potential to enhance the antioxidant activity of yogurt. This study aims to evaluate the effects of hawthorn powder (1.0–3.0%, <i>w</i>/<i>w</i>) addition on the antioxidant activity and physical properties of set-type yogurt. …”
Get full text

Effect of Hot Isostatic Pressing Treatment on Refractory High-Entropy Alloy WTaMoNbV Produced by Laser Powder Bed Fusion Process by Tomer Ron, Avi Leon, Maxim Bassis, Zhan Chen, Amnon Shirizly, Eli Aghion

“…This was carried out by examining the functional properties of this HEA in terms of mechanical and environmental performance. The microstructure of the tested HEA was evaluated using optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD). …”
Get full text

LOCAL MECHANICAL PROPERTIES OF ATMOSPHERIC SPRAYED MOLYBDENUM COATINGS DEPOSITED WITH CASCADED PLASMA TORCH by Jakub Antoš, Petra Šulcová, Kateřina Lencová, Šárka Houdková, Josef Duliškovic, Jan Hajšman, Karolína Burdová, Antonín Račický

“…In this paper, mechanical properties of atmospheric plasma sprayed molybdenum coatings on steel (S235) substrate are evaluated. Optimization of spraying parameters for spherical Mo powder sprayed by cascaded plasma torch SinplexPro is carried out and the influence on final microstructure, mechanical and tribological properties of molybdenum coatings is analysed.…”
Get full text

Influence of Interlayer Temperature and Deposition Method on the Wall Geometry and Vickers Microhardness Profile of ER70S-6 Parts Manufactured by Additive Manufacturing Using CMT by André Luis Silva da Costa, Raphael Lima de Paiva, Déborah de Oliveira, Maksym Ziberov

“…As a recent technology, different studies have been developed comprehending the deposition approach, aiming to achieve parts with specific characteristics, usually evaluating the geometry, microstructure and mechanical properties, such as yield and tensile strengths, residual stresses and microhardness; however, the last is usually presented by mean values, requiring more details to comprehend its behavior further. …”
Get full text

In-situ surface modification and bulk alloying of anti-bacterial Cu-bearing stainless steel using selective laser melting by Liu Kun, Ioi Lei Wang, Lap Mou Tam, Kin Ho Lo, Ruidi Li, Chi Wai Chan, Valentino A.M. Cristino, Chi Tat Kwok

“…In this study, Cu-bearing stainless steel Fe-Cr-Ni-Cu with different Cu contents (4 and 8 wt%) were prepared by surface modification and bulk alloying using selective laser melting (SLM) and their microstructure, metallurgical properties, hardness, corrosion resistance and antibacterial efficacy were evaluated. …”
Get full text