Study on the Speed Stability of Wheel Drive Mechanism used in Lunar Rover by Xiao Jie, Zeng Lingbin, Zhang Xiaowei, Liu Dianfu, Zou Huaiwu

“…The 3-stage planetary reducer with closed-loop control is adopted in CE-3 lunar rover wheel drive mechanism.Aiming at the problem that the speed stability of drive mechanism does not satisfy the design requirements,the factors affecting the speed stability of planetary reducer are systematically analyzed,and methods and measures minimizing the inequality of load sharing of planetary gear sets are studied carefully.Through troubleshooting and numerical simulations,the causation is uncovered as follows:the first stage sun gear radial runout exceeds the allowed range.Then two solutions are proposed:the first one is to redesign the first stage sun gear into a floating sun gear,the second one is to improve the machining precision of the first stage sun gear.And the second solution is adopted because it is smaller and lighter than the first one.Then much ground simulation tests which are conducted at the room condition,high-temperature vacuum condition and low-temperature vacuum condition demonstrate that the speed stability of drive mechanism satisfies the design requirements.At last,the effectiveness of the proposed method is validated by the telemetry parameters of lunar rover moving on the moon surface.…”
Get full text

Chemisorption of Lewis Bases on Zeolites – A New Interpretation of the Results by L.K. Patrylak

“…It was shown that the temperature programmed desorption of ammonia is the most effective method for providing a quantitative determination of the BrOnsted acidity of zeolites. …”
Get full text

Sensing Characteristics of Side-Hole Fiber-Based Long-Period Grating by Yi Xin, Xinyong Dong, Junwei Yuan, Yi Li, Shangzhong Jin, Sulei Zhang

“…Sensing characteristics of this SHF-LPG to temperature surrounding refractive index and bend have been investigated. …”
Get full text

Development and Characterization of Poly(1-vinylpyrrolidone-co-vinyl acetate) Copolymer Based Polymer Electrolytes by Nurul Nadiah Sa’adun, Ramesh Subramaniam, Ramesh Kasi

“…The temperature dependence of ionic conductivity from 303 K to 353 K exhibits Arrhenius plot behaviour. …”
Get full text

Influence of Lead on the Interpretation of Bone Samples with Laser-Induced Breakdown Spectroscopy by Abdolhamed Shahedi, Esmaeil Eslami, Mohammad Reza Nourani

“…Plasma parameters including plasma temperature and electron density were determined by considering Local Thermodynamic Equilibrium (LTE) condition in the plasma. …”
Get full text

Optimization of Process Parameters in Electrochemical Micromachining of AMCs by Using Different Techniques of Weight Evaluation by S. Maniraj, R. Thanigaivelan, K. Gunasekaran, K. G. Saravanan

“…In the EMM process, the temperature of the electrode, voltage, duty cycle, and electrolyte concentration are considered process parameters. …”
Get full text

Experimental Investigation of Factors Influencing Operating Rotor Tip Clearance in Multistage Compressors by Reid A. Berdanier, Nicole L. Key

“…Additional consideration is given to environmental contributions such as ambient temperature, for which changes in tip clearance height on the order of 0.05 mm (0.1% rotor span) were noted for temperature variations of 15°C. …”
Get full text

Hawking Radiation-Quasinormal Modes Correspondence for Large AdS Black Holes by Dao-Quan Sun, Zi-Liang Wang, Miao He, Xian-Ru Hu, Jian-Bo Deng

“…In this paper, by introducing the effective temperature, we reanalyze the nonstrictly thermal character of large AdS black holes. …”
Get full text

Condicionantes climáticos e socioeconômicos na espacialização da dengue em período epidêmico e pós-epidêmico na cidade de Fortaleza-CE by Gledson Bezerra Magalhães, Maria Elisa Zanella, Ana Paula Santana, Ricardo Almendra

“…In both episodes daily air temperature averages presented ideal conditions for the Aedes Aegypti reproduction with maximum temperature between 30 and 32°C and minimum between 21 and 25 ° C and relative air humidity from 76 to 95%. …”
Get full text

Influence of Machine Parameters and Coagulant on the Textural Properties of Paneer (Indian Cottage Cheese) by S. Sivaranjani, N. Karpoora Sundara Pandian, S. Parveen, D. Baskaran, V. Arun Prasath, V. Eyarkai Nambi, R. Pandiselvam

“…The texture of paneer manufactured from a developed automatic machine was studied with respect to the processing parameters such as coagulation temperature (70–90°C), pressure (0.3–0.6 MPa), types of coagulant (vinegar and citric acid), and milk (cow, buffalo, and full cream milk). …”
Get full text

Tracking anharmonic oscillations in the structure of β-1,3-diacetylpyrene by A. Zwolenik, A. Makal

“…The onset and development of anharmonic effects have been successfully tracked over a wide (90–390 K) temperature range using single-crystal X-ray diffraction. …”
Get full text

Improvement of Mechanical Behavior of FSW Dissimilar Aluminum Alloys by Postweld Heat Treatments by S. Prabhu, M. Naga Swapna Sri, P. Anusha, G. Saravanan, K. Kannan, Selvaraj Manickam

“…It is observed that the maximum TS (209 MPa) and YS (178 MPa) are identified when maintaining temperature 350°C on the FSW sample. The reduction in elongation of as-welded joints is entirely improved by HT, and the elongation percentage is almost increased to 5% when increasing temperature on the heat treatment process, and hardness test results exhibited that the increased hardness value (120Hv) is found at HT-300°C nugget zone distance of 0 to 5 mm range.…”
Get full text

Study on Adsorption Model of Deep Coking Coal Based on Adsorption Potential Theory by Si Shasha, Wang Zhaofeng, Zhang Wenhao, Dai Juhua

“…Based on this, this paper chooses Pingdingshan coking coal as the research object, using Hsorb-2600 high-temperature and high-pressure gas adsorption instrument to carry on isothermal adsorption experiment. …”
Get full text

Study on the Performance of Electrothermal Shape Memory Alloy and Magnetorheological Combined Drive by Yang Xiong, Jin Huang, Ruizhi Shu

“…Based on the thermal effect characteristics of shape memory alloy， the relationship between extrusion force and temperature of electrothermal SMA spring is established. …”
Get full text

Effects of the Reaction Parameters and Light Hydrothermal Aging for Catalytic Combustion of Propane over Co-Mn-Ce Catalyst by Lili Lei, Miaomiao Jin, Chenrui Cui, Kai Li, Pan Wang

“…The influence of reaction temperature, propane concentration, oxygen concentration, water vapor, and hydrothermal aging was studied during the catalytic combustion of propane. …”
Get full text

Processing and Characterization of High Density Polyethylene/Ethylene Vinyl Acetate Blends with Different VA Contents by Othman Y. Alothman

“…The storage modulus decreased with increasing the EVA ratio and temperature, while it increased with increasing the frequency. …”
Get full text

The Quantitative Research of Interaction between Key Parameters and the Effects on Mechanical Property in FDM by Hongbin Li, Taiyong Wang, Zhiqiang Yu

“…A new numerical model is built to describe the cooling process of the fused filament, which shows a perfect coherence with the practical temperature file of filament. It reveals what the forming mechanism of the bonding between filaments is and how these parameters act on final tensile strength of the specimen of this way from temperature. …”
Get full text

Modeling and Optimization of BT and DBT Photooxidation over Multiwall Carbon Nanotube-Titania Composite by Response Surface Methodology by Molood Barmala, Mohammad Behnood

“…According to the results, temperature has the greatest impact on removal rate. …”
Get full text

An Experimental Study on Heat Conduction and Thermal Contact Resistance for the AlN Flake by Huann-Ming Chou, Jin-Chi Wang, Yuh-Ping Chang

“…It is well known that AlN still maintains stablility in the high temperature. This is quite attractive for the research and development department. …”
Get full text

CO2 Adsorption Capacity of Organic Alkali Sorbent CPEI from Polyethyleneimine by Feng Wang, Lu Yu, Youhua Li, Dengfa Huang

“…The CO2 capacity of CPEI remained almost constant during the temperature swing adsorption/desorption cycles.…”
Get full text