Optimization study of low-NOx combustion in boiler based on pulverized coal preheating solution by Lingfang Sun, Mengchao Xu, Yu Jia, Bingxue Zong, Guoliang Feng

“…Secondly, the deep belief neural network (DBN) and long short-term memory network (LSTM) were used to establish the combustion model of pulverized coal boiler based on the ignition temperature, outlet temperature, powder feeding frequency and other parameters, as well as the coupling relationship between NOx and CO emissions. …”
Get full text

Development of Downscaled Climate Projections: A Case Study of the Red River Basin, South-Central U.S. by Darrian Bertrand, Renee A. McPherson

“…Furthermore, mean daily temperature is expected to rise across the entire basin in all scenarios by up to 6–7°C.…”
Get full text

Thermo-mechanical analysis of free convection in an octagonal cavity with adjustable active walls and flexible separator by Mohamed Boujelbene, Awatef Abidi, S. A. M. Mehryan, Sultan Alshehery, Ahmad Hajjar, Nehad Ali Shah, Ibrahim Mahariq, Nidhal Ben Khedher

“…One of the left walls is maintained at a high temperature, while a lower temperature is applied to one of the right walls. …”
Get full text

Infrared thermal modulation endoscopy for label-free tumor detection by Suhyeon Kim, Gyungseok Oh, Young Ro Kim, Euiheon Chung, Hyuk-Sang Kwon

“…Abstract In optical imaging of solid tumors, signal contrasts derived from inherent tissue temperature differences have been employed to distinguish tumor masses from surrounding tissue. …”
Get full text

Performance Improvement of a Flash-Binary Geothermal Power System Using Zeotropic Working Fluid; A Comprehensive Exergoeconomic Analysis and Optimization by Seyed Sajad Mosaviasl, Ali Dezhdar, Sajjad Keykhah, Ehsan Farhadi, Mojtaba Nedaei

“…Based on the parametric study results, the mass fraction variation influences the net power generation, energy and exergetic efficiencies, and the payback period is higher than the evaporation temperature in the vapor generator unit while, the exergy destruction is influenced by the evaporation temperature higher than the zeotropic mixture mass fraction. …”
Get full text

Physico-chemical changes and maturity evaluation of composts from wood residue mixed with sewage sludge and chicken manure by Mohammad Hossein Saghi, Payam Ghorbannezhad, Abotaleb Bay, Farangis Saeidi

“…A pilot-scale composting process was applied to monitor the aeration rate, temperature, and moisture contents during the process over time. …”
Get full text

Impacts of Model Bias on the Climate Change Signal and Effects of Weighted Ensembles of Regional Climate Model Simulations: A Case Study over Southern Québec, Canada by Hyung-Il Eum, Philippe Gachon, René Laprise

“…A significant dependence of seasonal climate change signals on the model biases over southern Québec in Canada was detected for temperatures, but not for precipitation. This suggests that the regional temperature change signal is affected by local processes. …”
Get full text

Safety assessment of microwave ablation in sheep vertebral bodies by Hendricus Nijland, Jinwen Zhu, Thomas Kwee, Ding-Jun Hao, Paul Jutte

“…Ablations with wattage levels of 40–50 W almost instantly led to temperatures over 60 °C at the posterior wall. The temperature remained below 60 °C for 4 min in ex-vivo ablations with 20 and 30 W. …”
Get full text

Transformation of M/A Constituents during Tempering and Its Effects on Impact Toughness of Weld Metals for X80 Hot Bends by Gui-ying Qiao, Xiu-lin Han, Xiao-wei Chen, Xu Wang, Bo Liao, Fu-ren Xiao

“…With the increase of the tempering temperature, the carbide particles coarsen, which decreases the impact toughness of the weld metal of hot bends. …”
Get full text

Quasi one-dimensional organic conductors: from Fröhlich conductivity and Peierls insulating state to magnetically-mediated superconductivity, a retrospective by Jerome, Denis, Bourbonnais, Claude

“…It is indisputable that the search for high-temperature superconductivity has stimulated the work on low-dimensional organic conductors at its beginning. …”
Get full text

Permeability Coefficient of Unsaturated Loess and Its Gaseous and Liquid Water Migration Modeling by Ya-lin Nan, Zai-kun Zhao, Xin Jin, Liang Zhang, Xiao-xuan Zhu, Ze-jun Liu

“…Furthermore, the density significantly affects the matric suction of unsaturated loess, while the temperature change at normal temperature has slight effect. …”
Get full text

Characterization of Waste Generated from Nuclide Management Process in Waste Burden Minimization Technology for Spent Nuclear Fuel by Jung-Hoon Choi, Byeonggwan Lee, Ki-Rak Lee, Hyun Woo Kang, Hyeon Jin Eom, Seong-Sik Shin, Ga-Yeong Kim, Hwan-Seo Park

“…The results of this study could be used to derive the centerline temperature for the thermal stability evaluation of waste forms and for the feasibility evaluation of each disposal system considered in the waste burden minimization technology.…”
Get full text

Spring Intermonsoon Future Projection of El Niño and Its Teleconnection at The Maritime Continent During Warmer Period by Mat Zin Muhamad Zuhairi, Salimun Ester, Liew Juneng, Tangang Fredolin

“…The increase in sea surface temperature in the Pacific Ocean, particularly in the Niño 3.4 region, was documented as higher in SSP5-85 than in SSP2-45. …”
Get full text

EXPERIMENTAL STUDY THE MECHANICAL PROPERTIES OF GMAW WELDING RESULTS ON S355J2+N MATERIAL WITH POST WELD HEAT TREATMENT (PWHT) by Muhammad Arif, Indarto Yuwono, Alfi Tranggono Agus Salim, Alit Dharmawan, Dara Lathiful Zuriah

“…The results of the research are that the largest tensile strength value of 576 MPa was produced in the material using PWHT at a temperature of 450 °C, the largest elongation of 34.85% was produced in the material with a PWHT temperature of 750 °C, and the highest hardness value was 207.44 HV in the material non-PWHT. …”
Get full text

The Performance and Mechanism Analysis of Cement Pastes Added to Aluminum Sulfate-Based Low-Alkali Setting Accelerator by Xingdong Lv, Yan Shi, Yun Dong, Zhiyang Gao, Beixing Li

“…To investigate the temperature adaptation and cement flexibilities of HLSA, the setting time and strength development properties of cement with HLSA were discussed in this paper. …”
Get full text

Modeling the Impact of Air Pollution and Meteorological Variables on COVID-19 Transmission in Western Cape, South Africa by John Kamwele Mutinda, Amos Kipkorir Langat

“…Ambient wind direction and temperature showed a nonsignificant association with COVID-19 at all lags. …”
Get full text

Influence of Hot Rolling Process on Microstructure and Properties of Low-strength IF Steel by Liu　Gan, Ai　Chengshen, Li　Jiangwei, Kong　Xianglei, Wang　Yang, Huang　Minghao

“…The results show that the microstructure of hot-rolled IF steels in the austenitic zone was equiaxed grains， while the grains of hot-rolled IF steel in the ferrite zone are elongated and fibrous along the rolling direction； Compared with the austenitic zone hot rolling process， the optimum process parameters for ferrite zone rolling are heating temperature 1 150 ℃+final rolling temperature 800 ℃+coiling temperature 720 ℃， in which the yield strength Rp0.2 is significantly reduced， and the size of precipitated phases is overall larger by 70-85 nm， but there is no significant difference in the size of TiN precipitated phases； In terms of texture， cold-rolled annealed IF steel γ texture is stronger， and the orientation distribution of each component in the main texture is more concentrated with smaller differences in strength.The corresponding r value increases by 0.64， while the △r value decreases by 0.35， significantly improving its deep drawing formability. …”
Get full text

Investigation of the Performance of the Ecofriendly Fiber-Reinforced Asphalt Mixture as a Sustainable Pavement Material by Bowen Guan, Jianan Liu, Jiayu Wu, Jingyi Liu, Haitao Tian, Tengbin Huang, Chengcheng Liu, Tao Ren

“…The results showed that the CSWF could improve the high-temperature stability and low-temperature crack resistance of the asphalt mixture. …”
Get full text

Chemical Kinetic Study on Dual-Fuel Combustion: The Ignition Properties of n-Dodecane/Methane Mixture by Weijian Zhou, Song Zhou, Hongyuan Xi, Majed Shreka, Zhao Zhang

“…The relationship between ignition characteristics of methane-n-dodecane and temperature was studied by changing the initial temperature. …”
Get full text

Performance Analysis of Thermal and Surface Roughness Effect of Slider Bearings with Unsteady Fluid Film Lubricant Using Finite Element Method by Girma Desu Tessema, Getachew Adamu Derese, Awoke Andargie Tiruneh

“…Furthermore, the combined effects at various temperatures have been investigated. As a result, in both longitudinal and transverse models, in the case of the pad temperature being lower than the slider, the load-carrying capacity performance is higher than in other cases for nonparallel slider bearings, whereas when the slider temperature is lower than the pad temperature, the drag frictional force is the leading one in both models. …”
Get full text