Investigation of the Suitability of the DTV Method for the Online SoH Estimation of NMC Lithium-Ion Cells in Battery Management Systems by Jan Neunzling, Philipp Hainke, Hanno Winter, David Henriques, Matthias Fleckenstein, Torsten Markus

“…Investigating the temperature behavior of lithium-ion battery cells has become an important part of today’s research and development. …”
Get full text

Study on the Multi-Hazard Responses of Transmission Tower-Line Systems Under Fire and Wind Loads Using ABAQUS by Xiwei He, Huichao Ma, Shibo Zhang, Wenming Wang, Lijuan Zhang

“…The failure criteria for transmission tower components at high temperatures were determined by considering the constitutive relationship of steel at ambient temperature and the variation patterns in material strength and elastic modulus with temperature. …”
Get full text

Discovery of new topological insulators and semimetals using deep generative models by Tao Hong, Taikang Chen, Dalong Jin, Yu Zhu, Heng Gao, Kun Zhao, Tongyi Zhang, Wei Ren, Guixin Cao

Get full text

Spin Glass State and Griffiths Phase in van der Waals Ferromagnetic Material Fe₅GeTe₂ by Jiaqi He, Yuan Cao, Yu Zou, Mengyuan Liu, Jia Wang, Wenliang Zhu, Minghu Pan

“…Fe₅GeTe₂ has attracted much attention because of its ferromagnetic transition temperature near room temperature. However, the investigation of its phase transition is rare until now. …”
Get full text

Comparative Analysis of Thermomechanical Properties and Thermal Damage Constitutive Models of Three Soft Sedimentary Rocks by Wenhua Zha, Weixing Shao, Suqin Yao, Qiang Chen, Denghong Chen

“…The results show that (i) in the test temperature range, the stress-strain curves of the three types of soft rocks at different temperatures are roughly divided into four stages: compaction, elasticity, yield, and failure. …”
Get full text

Interfacial microstructure evolution behavior during plastic deformation bonding of GH4065A superalloy by SU Lidong, MENG Qingqi, NING Yongquan, HUANG Shuo, ZHANG Wenyun, ZHANG Beijiang

“…To clarify the evolution of the interfacial microstructure of GH4065A superalloy during plastic deformation bonding， the GH4065A superalloy is bonded under temperatures of 1050-1110 ℃ with the pressure of 20-40 MPa and a time range of 20-35 min. …”
Get full text

Modeling and robust control of a parallel robotic mechanism driven by linear actuators based on shape memory alloys by Alejandro Guarneros-Sandoval, Mariana Ballesteros, Rita Q. Fuentes-Aguilar, Isaac Chairez

“…The controller estimates the SMA temperature to move the actuators, and the average electrical power is computed to drive the temperature to the reference value. …”
Get full text

Short and long-range magnetic ordering and emergent topological transition in (Mn1−xNix)2P2S6 by Nasaru Khan, Deepu Kumar, Shantanu Semwal, Yuliia Shemerliuk, Bernd Büchner, Koushik Pal, Saicharan Aswartham, Pradeep Kumar

“…The famous Mermin-Wagner theorem states that spontaneous spin symmetry cannot be broken at finite temperature in low dimensional magnetic systems which forbids the possibility of a transition to a long-range ordered state in a two-dimensional magnetic system at finite temperature. …”
Get full text

Simulation of Material and Heat Balance of 150 t AOD Melting 430 Stainless Steel under Different Charge Conditions by Lu　Xiaohui, Kang　Congpeng, Chen　Hongzhi, Xu　Yongbin

“…By adding scrap steel as coolant to control the furnace temperature and meet the tapping temperature requirements， under this condition， the consumption of scrap steel per ton of steel was 169.1 kg， and the proportion of scrap steel added was 15.1%. …”
Get full text

Investigation of the Use of the Thermo-Biological Method in the Return Sludge Line on the Biokinetics of the Activated Sludge Process and the Amount of Excess Sludge Produced by Naeim Banisaeid, Afshin Takdastan, Mahboobeh Cheraghi, Ali Afrous, Reaz Jalilzadeh Yengejeh

“…In this research, the effects of temperature changes in the anoxic tank and return line were investigated to increase the biological removal of sludge, reduce the excess biological sludge; also, the effects of temperature changes on the biokinetics parameters in the activated sludge system were analyzed. …”
Get full text

Experimental and numerical research on jet dynamics of cavitation bubble near dual particles by Yuning Zhang, Xuan Lu, Jinsen Hu, Jiaxin Yu, Yuning Zhang

“…The temperature inside the bubble increases with the proximity of the two jets.…”
Get full text

Thin-film heat-sensitive elements on the basis of semimetals for electromagnetic radiation receivers by Mikhail A. Kik, Ilya A. Golokolenov, Aleksandr S. Sigov, Anatoly A. Shilyaev, Vitaly V. Zavyalov, Sergey S. Verbitsky, Aleksey N. Tselebrovsky

“…A study was made on the thermoelectric properties of bismuth–antimony thin films in the range from liquid helium temperature to room temperature in order to use these films as a bolometric type sensitive element in the range from infrared to radio frequency. …”
Get full text

Experimental Research on the Mechanical Properties of Heated Granite after Rapid Cooling by Huifen Han, Junliang Peng, Yintong Guo, Qiuyun He, Jun Zhou, Xinghao Gou

“…This paper is devoted to investigating the effect of rapid cooling on the mechanical behavior of the granite rock. At first, high-temperature heating was conducted. The 24 samples were divided into six groups and were heated at 100, 200, 300, 400, 500, and 600°C, and once they had reached the chosen temperature, they were immediately cooled with a cold water container, and the temperature of water in the pan was 25°C. …”
Get full text

Preparation and Properties of Coal Ash Ceramic Membranes for Water and Heat Recovery from Flue Gas by Haiping Chen, Xiangsheng Li, Jiadi Wei, Yijun Feng, Dan Gao

“…The main material of this membrane is fly ash which can reduce the sintering temperature and save the costs. The coal ash ceramic membrane (CACM) was characterized by XRD, SEM, and mercury intrusion method. …”
Get full text

Quantifying Thermal Discharges from Nuclear Power Plants: A Remote Sensing Analysis of Environmental Function Zones by Xiang Wang, Xiu Su, Lin Wang, Xinxin Wang, Qinghui Meng, Jin Xu

“…Summer exhibited a larger influence range but with lower temperature rises, while winter showed a smaller influence range but with higher temperature rises. …”
Get full text

Acute Effects of Dry Needling on Myofascial Trigger Points in the Triceps Surae of Ballet Dancers: A Pilot Randomized Controlled Trial by Jennifer A Janowski, Deanna M L Phelan-Smith, Maria N Kroat Brady, Kelsey L Michels, Alexandra H Timm, Nicole M Boucher, Kedron D Casteen, David Village, Mark D Sleeper

“…However, the methodology for this study and surface temperature results invites future research. # Level of evidence Level 1b…”
Get full text

Thermodynamic Analysis and Optimization of Secondary Overheating Parameters in Turbo-Expander Plants on Low Boiling Working Fluids by A. V. Ovsyannik, V. P. Kliuchinski

“…The influence of pressure and temperature in the intermediate superheater on the exergetic efficiency of the turbo-expander unit was studied. …”
Get full text

Particle Shape-Based Evaluation of the Leaching of Sphalerite Ore in Dilute Acid Solutions by Mert Terzi, İlgin Kurşun Ünver, Tuğba Deniz Tombal

“…Optimum results were obtained under the conditions of 75 µm particle size, 15% solids ratio, 120 min leaching time, 0.5 M acid dosage, and 50°C pulp temperature for H2SO4; 106 µm particle size, 25% solids ratio, 60 min leaching time, 0.5 M acid dosage, and 70°C pulp temperature for HCl; 75 µm particle size, 20% solids ratio, 60 min leaching time, 1 M acid dosage, and 50°C pulp temperature for HNO3. …”
Get full text

Numerical exploration and thermal criticality of a dual exothermic reaction with radiative heat loss in co-axial cylinder configurations by R.A Oderinu, S.O. Salawu, A.D. Ohaeghue, S. Alao, E.I. Akinola, J.A. Owolabi

“…An in-depth investigation and discussion were conducted on the impact of significant thermal parameters and critical conditions on temperature. The physical features have a similar effect on the temperature for all three boundaries, although with varying degrees of impact: increase in the initiation rate (ρ), Frank-Kamenetskii (α), second step (β)and reaction kinetics (n) parameters enhanced the temperature profile of the reacting system, while a fall in the temperature was observed with an increase in the radiation parameter. …”
Get full text

Impact of hot alkali modification conditions on secondary structure of peanut protein and embedding rate of curcumin by Wei Li, Shugang Li, Yong Hu, Mengzhou Zhou, Chao Wang, Dongsheng Li, Deyuan Li

“…Within the range of the heating temperature 75 °C < T < 95 °C, the percentage of random coils and β-sheets gradually increased with increasing heating temperature, while that of α-helices and AAR gradually decreased with increasing heating temperature; they remained unchanged when the heating temperature was 90 °C, and then decreased to (10.41 ± 1.18%; p<0.01) and (4.02 ± 2.12%; p<0.01), respectively. …”
Get full text