Thermal Effect Monitoring System of Dry-Type Smoothing Reactor by Jingen Hu, Minglei Shi, Chenhua Jiao, Guichi Zhu

“…Finally, the temperature rise test of the dry-type smoothing reactor is carried out. …”
Get full text

Study on the Construction Performance of Zeolite Asphalt Mixture Based on Macro-Micro Scale by Zhuolin Li, Junda Ren, Jianping Zhu, Wei Li, Xingsheng Fu, Liying Yang

“…According to the viscosity temperature equation, the mixing and compaction temperature of the asphalt mixture are determined. …”
Get full text

Experimental and simulation study on tensile mechanical characteristics and crack development law of sandstone after thermal treatment by Jing Yang, Sheng-Qi Yang, Guang-Jian Liu, Bo-Wen Sun, Wen-Ling Tian, Jin-Zhou Tang

“…The thermal damage caused by high temperature will accelerate the deterioration of rock mechanical properties, affecting the stability of surrounding rock in underground engineering. …”
Get full text

Analysis and optimization of LN2 two-phase flow in CRAFT NNBI cryopump by Qianxu Wang, Yuanlai Xie, Huihui Hong, Yang Zhu, Fang Wang, Kun Tian, Bin Li

“…The simulation results show that the optimized structure B can reduce the pressure drop by 3 bar, the outlet temperature of structure A is 78.8 K, the outlet temperature of structure B is 79.2 K, the temperature difference is 0.4 K. …”
Get full text

Effect of FeO content on melting characteristics and structure of nickel slag by Ma Y.-T., Yang P., Lu B.-G., Dou Y.-L., Tian J.-K., Guo W.-B., Zhang Z.-Q., Shen Y.-Y.

“…The results are as follows: with increasing FeO content, the precipitated primary phase changes from melilite to olivine. The liquidus temperature, softening temperature, hemispherical temperature, flow temperature, viscosity, and critical viscosity temperature of the slag system tend to decrease gradually, but the solid phase temperature tends to decrease first and then increase. …”
Get full text

Magnetic field influence on heat transfer of NEPCM in a porous triangular cavity with a cold fin and partial heat sources: AI analysis combined with ISPH method by Munirah Aali Alotaibi, Weaam Alhejaili, Abdelraheem M. Aly, Samiyah Almalki

“…Increasing the Hartmann number reduces flow and heat transfer efficiency by 40 %, causing sharper temperature gradients, while lower Ha values promote natural convection and more uniform temperature distributions. …”
Get full text

Coupling Action of Cooling and Dynamic Load Impact on Deformation Characteristics of High-Salinity Saline Soils by Yu Zhang, Meisi Zou, Runze Tian, Anhua Xu, Yunlong Hou, Bingbing Han, Xuemei Li

“…Firstly, the freezing temperature experiment was carried out on SS (sandy silt) and HS (high-sulfate silty clay). …”
Get full text

Numerical Study on Combustion Behavior of Tuyere and Raceway in Blast Furnace with Oxygen-Rich Blast and Hydrogen Injection by Ruimeng Shi, Yue Pei, Mengmeng Ren, Zheng Xue, Xinqi Li, Heping Liu

“…The magnitude of velocity and temperature near the tuyere only increase slightly due to the cold inlet temperature of hydrogen, which also results in lower coke bed temperature. …”
Get full text

Estimation of the Effect of Oblique Positioned Obstacle Placement on Thermal Performance of a Horizontal Mantle Hot Water Tank with Machine Learning by Aslı Durmuşoğlu, Buket Turgut, Yusuf Tekin, Burak Turgut

“…The residential water temperature in this model is 312 K, while the storage water temperature is 309.5 K. …”
Get full text

A new mixing chamber geometry design for supersonic ejector performance optimization using computational fluid dynamics by Amer Muzaber, Nadin Bassmaji, Assem Kaddah

“…Ten distinct profiles of curved mixing chamber with fixed geometries for the ejector throat, diffuser, and primary nozzle are investigated within a boiler saturation temperature range of 130°C to 170°C and an evaporator temperature of 7.5°C. …”
Get full text

Effect of residual carbon on crystallization and solidification behavior of coal gasification coarse slag by Ze Meng, Rongsheng Xu, Qian Feng, Xiongchao Lin, Mei Li

“…The results obtained from ash fusion temperature (AFT) tests indicate that the coarse slag exhibits a relatively higher flow temperature compared to the decarburized coarse slag. …”
Get full text

Analysis of Electromagnetic and Thermal Processes of an Induction Motor Using 3D Modeling by A. N. Pekhota, V. N. Galushko, B. M. Khrustalev, D. V. Mirosh

“…The main factors influencing the calculation methods, taking into account the aging rate, temperature and distribution of the temperature field, are determined, as well as the service life of the insulation. …”
Get full text

Magnetohydrodynamic unsteady natural convection slip flow in a vertical parallel plate microchannel heated with constant heat flux by Mohsen Saghafian, Mehdi Moslehi, Omid Ali Akbari

“…Slip velocity, as well as temperature jump at channel walls, are modeled using a first-order model. …”
Get full text

Enhanced Light Scattering by Preferred Orientation Control of Ga Doped ZnO Films Prepared through MOCVD by Long Giang Bach, Nam Giang Nguyen, Van Thi Thanh Ho

“…We have explored the effective approach to fabricate GZO/ZnO films that can make the pyramidal surface structures of GZO films for effective light scattering by employing a low temperature ZnO buffer layer prior to high temperature GZO film growth. …”
Get full text

Influence of Real-Time Heating on Mechanical Behaviours of Rocks by Bin Gu, Zhijun Wan, Yuan Zhang, Yangsheng Ma, Xiaodong Bernard Xu

“…The rock mechanical properties under the effect of high temperature present a great significance on underground rock engineering. …”
Get full text

Phase Transformation, Microstructures, and Mechanical Properties of α + β Two-Phase Titanium Alloy Deposited Metal by Surfacing Welding by Naiwen Fang, Ruisheng Huang, Kai Xu, Tianli Zhang, Pengbo Wu, Yiming Ma, Hao Cao, Jian Qin, Jipeng Zou

“…The effect of cooling rate on phase transformation, microstructures, and mechanical properties of TC4 titanium alloy deposited metal by laser surfacing welding with filler wire was investigated by in situ observation with a high-temperature laser confocal microscope, XRD, SEM, and through microhardness test. …”
Get full text

Gradation Design and Performance Evaluation of High Viscosity Asphalt Mixtures by Xudong Hu, Sheng Li, Hui Yao, Hui Wang, Mei Xu, Dandan Cao, Mohd Rosli Mohd Hasan, Cong Duan, Ran Zhang

“…The performance of the proposed HVAM was evaluated through a series tests including the permanent deformation at high temperature, moisture stability, low-temperature cracks, and bending fatigue test. …”
Get full text

Thermal and Mechanical Properties of Vinyl Ester Hybrid Composites with Carbon Black and Glass Reinforcement by Geetanjali S. Guggari, S. Shivakumar, G. A. Manjunath, R. Nikhil, Alagar Karthick, Abhilash Edacherian, C. Ahamed Saleel, Asif Afzal, S. Prasath, B. Saleh

“…Glass transition temperature increases with the percentage of carbon black while above 500°C temperature, the weight percentage of composite drops. …”
Get full text

Minimization of entropy generation rate in methanol steam reforming reactor by Rui Kong, Shaojun Xia, Zhihui Xie, Yu Lin

“…Based on reference reactor with constant temperature heat supply, optimal control theory is applied to obtain optimal reactors for three cases, i.e. fixed inlet temperature, free inlet temperature, free inlet temperature and steam/carbon (S/C) ratio. …”
Get full text

Preventing Hypothermia in Preterm Neonates Using Polyethylene Plastic Bag Wrap: A Systematic Review by Hikmi Muharromah Pratiwi, Desiyani Nani, Saryono Saryono

“…This study included 10 trials involving 1704 preterm infants: 8 trials reported on poststabilization temperature and incidence of hypothermia, 2 trials showed hypothermia, and one trial in poststabilization temperature for the outcome. …”
Get full text