Performance Study of Intermittent Heating Mode Combining Air-Source Heat Pump with Radiator in Hot Summer and Cold Winter Zones of China by Mingjing Fan, Haifeng Cheng, Mengting Nian, Shiqi Xie

“…The results show that the water supply temperature of 60°C at the startup stage can rapidly increase the indoor air temperature; in the stable stage, the water supply temperature is 40°C, the indoor air maintains a suitable temperature and relative humidity, and the indoor thermal environment is basically unaffected by the change in outdoor temperature and humidity; the inner surface temperature of the envelope (except the window) presents a similar trend to the indoor air temperature, which reduces the asymmetry of the thermal radiation field around the human body. …”
Get full text

Effect of annealing on the tribological behavior of Zr-based bulk metallic glass by Hsu-Ming Lien, Nicolás Molina, Aisha Lizaola, Michael Chandross, Filippo Mangolini

“…Here, a systematic evaluation of the effect of annealing temperature (from temperatures lower than the BMG glass transition temperature to temperatures higher than the BMG recrystallization temperature) on the friction and wear response of a Zr-based BMG, namely Vit105 (Zr52.5Cu17.9Ni14.6Al10Ti5), was performed. …”
Get full text

Thermal and Electronic Conductivity in Normal and Superconducting Erbium Nickel Borocarbide (ErNi2B2C) by Habtamu Tesfaye

“…Results from the electronic thermal conductivity versus temperature (T) are presented. From the result, electrical and thermal conductivity at low temperature obey the Wiedemann–Franz law. …”
Get full text

Thermal Model Parameter Identification of a Lithium Battery by Dirk Nissing, Arindam Mahanta, Stefan van Sterkenburg

“…The temperature of a Lithium battery cell is important for its performance, efficiency, safety, and capacity and is influenced by the environmental temperature and by the charging and discharging process itself. …”
Get full text

TECHNO ECONOMIC ANALYSIS OF BIOMASS AS AN ALTERNATIVE ENERGY HOUSEHOLDS AND SMALL INDUSTRIES by Rany Puspita Dewi, Trisma Jaya Saputra, Mario Ammar Rasyid

“…The research was done by variating carbonization temperature at 400oC, 500oC, and 600oC. The result showed that at carbonization temperature of 400oC, the volatile matter and fixed carbon was 42.28% and 55.74%. …”
Get full text

Peltier Elements-based Human Brain Hypothermia Treatment by Rabab Talib Abdullah, Sadik Kamel Gharghan, Ahmed J. Abid

“…Brain cells are also weak and sensitive to changes and fluctuations in human temperature. In this work, a hypothermia device was designed and practically implemented to reduce the brain and body temperature. …”
Get full text

Fluxless Direct Soldering of Transparent Conductive Oxides (TCOs) to Copper by Lung-Chuan Tsao, Cheng-Kai Li, Yu-Kai Sun, Shih-Ying Chang, Tung-Han Chuang

“…The shear strengths of AZO/Cu and ZnO/Cu joints soldered with Sn8Zn3Bi1Mg active solder were 10.3 and 7.5 MPa at room temperature, respectively. Increasing the temperature from room temperature to 180°C reduced the bonding shear strengths of AZO/Cu and ZnO/Cu joints to 3.3 and 3.7 MPa, respectively.…”
Get full text

Primary quantum thermometry of mm-wave blackbody radiation via induced state transfer in Rydberg states of cold atoms by Noah Schlossberger, Andrew P. Rotunno, Stephen P. Eckel, Eric B. Norrgard, Dixith Manchaiah, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Samuel Berweger, Matthew T. Simons, Dangka Shylla, William J. Watterson, Charles Patrick, Adil Meraki, Rajavardhan Talashila, Amanda Younes, David S. La Mantia, Christopher L. Holloway

“…This represents a calibration-free SI-traceable temperature measurement, for which we calculate a systematic fractional temperature uncertainty of 0.006, corresponding to 2 K at room temperature when used as a primary temperature standard.…”
Get full text

Experimental Study on the Evolution of Fracture Aperture of Single-Fracture Granite during Liquid Nitrogen Cold Shock Cycling by Haiping Niu, Weidong Yu

“…The real-time high-temperature triaxial servo control rock testing machine was used to conduct permeability experiments to examine the fracture aperture of single-fracture granite during liquid nitrogen shock cycles at various temperatures. …”
Get full text

Study on the Effect of Different Fe2O3/ZrO2 Ratio on the Properties of Silicate Glass Fibers by Jianxun Liu, Jianping Yang, Haibin Huo, Liang Lei, Ying Cui, Zhishen Wu

“…The results show that the deformation temperature, sphere temperature, hemisphere temperature, and crystallization temperature of the fiber initially decrease and then increase with the increase of Fe2O3/ZrO2 ratio, while the molding temperature decreases with the increase of the ratio of Fe2O3/ZrO2. …”
Get full text

Improving the Performance of Liquid-Based Battery Thermal Management Systems Using Flow Patterns and Contact Surface with the Battery by Abolfazl Mokhtari

“…This study examined the impact of different flow patterns and solid block contact surfaces on the maximum surface temperature and temperature distribution uniformity. …”
Get full text

Freeze-Thaw Cycle Effect on Sputtering Rate of Water-Saturated Yellow Sandstone under Impact Loading by Yunbing Hu, Tianzhu Duan, Penghui Xian, Liang Chen

“…In order to explore the impact of freeze-thaw temperature on the sputtering rate of water-saturated yellow sandstone under impact loading, in this paper, the Hopkinson pressure bar is used to conduct impact loading test on the water-saturated yellow sandstone at the same strain rate (74.22 s−1) under five different freeze-thaw temperatures. …”
Get full text

Brood thermoregulation effectiveness is positively linked to the amount of brood but not to the number of bees in honeybee colonies by Godeau, Ugoline, Pioz, Maryline, Martin, Olivier, Rüger, Charlotte, Crauser, Didier, Le Conte, Yves, Henry, Mickael, Alaux, Cédric

“…Therefore, we determined whether colony size (number of adult bees and amount of brood) positively influenced the effectiveness of brood thermoregulation that we measured via two criteria: (i) the brood temperature accuracy, via mean brood temperature, supposedly close to the optimum value for brood rearing, and (ii) the stability of the temperature around the mean value. …”
Get full text

Estimating the Growing Degree Days in the Northwest of Iran based on Climate Change Models by Hasan Zolfaghari, Jafar Masoompourv Samakosh, Shabnam Chahvari

“…Generally with the temperature increasing, the amounts of growing degree-day without exception increases in review periods and under the four Base temperature. …”
Get full text

Experimental and Techno-Economic Analysis of Solar-Geothermal Organic Rankine Cycle Technology for Power Generation in Nepal by Suresh Baral

“…Temperature of hot spring can also further be increased by adopting the solar collector for rising the temperature. …”
Get full text

Dynamic characteristics of a two-phase mechanically pumped cooling loop for avionics by Shaohuan Qi, Zhaohao Xu, Jiale Wang, Yu Xu

“…For low temperature start-up, the heating wall temperature is lower, but the pressure drop is usually higher compared to high temperature start-up. …”
Get full text

Effect of Process Parameters on Short Fiber Orientation along the Melt Flow Direction in Water-Assisted Injection Molded Part by Haiying Zhou, Hesheng Liu, Qingsong Jiang, Tangqing Kuang, Zhixin Chen, Weiping Li

“…Results show that water pressure, melt temperature, and water temperature have significant effects on SFO. …”
Get full text

Performance of Rejuvenated Asphalt and Mixtures with Waste Engine Oil Bottom and Liquid Styrene-Butadiene Rubber by Gang Zhou, Yi Tian, Liang Gong, Zhansheng Pang, Tianquan Chen

“…The WEOB decreased the glass transition temperature and low-temperature performance grade of aged asphalt and resulted in a significant effect on the recovery of penetration and softening point of aged asphalt; however, the recovery of low-temperature ductility was inadequate. …”
Get full text

Microstructural and Electrical Properties of Sn-Modified BaTiO3 Lead-Free Ceramics by Two-Step Sintering Method by Wichita Kayaphan, Pornsuda Bomlai

“…Varying the first sintering temperature T1 (1400 and 1500°C) and the dwell time t1 (0, 15, and 30 min), we obtained dense ceramics which were then soaked at a constant temperature of 1000°C (T2) for 6 h (t2). …”
Get full text

Thermal Environment inside a Tunnel after Thermobaric Explosion by Fei Chen, Jinfeng Mao, Jin Zhou, Pumin Hou, Liyao Liu, Shangyuan Chen

“…The increase of explosive mass and the initial ground temperature favor the high-temperature performance of TBX, especially for the blocked tunnel.…”
Get full text