Kinematic Analysis of Long Stroke Pumping Unit with Post Pulley by Sun Wenbin, Zhou Sizhu, Wu Bangxiong, Lü Zhipeng

“…On the basis of that,the post pulley mechanism that change with the displacement of the suspended point and adjust the balance arm is designed. The steel belt is used to replace the traditional steel wire rope to fix on the post pulley. …”
Get full text

Experimental Study on Seismic Performance of Prefabricated Frame Column Joints with a High Axial Compression Ratio by Y. L. Wang, X. Y. Wu, B. B. Li

“…A new type of an assembled monolithic concrete column encased by partial outsourcing steel was proposed, and the seismic performance was proposed. …”
Get full text

Effect of Fiber Angles on Hybrid Double-Tube Concrete Columns under Monotonic Axial Compression by Bing Zhang, Yu-Jun Qi, Tao Huang, Qian-Biao Zhang, Yu Hu, Xia-Min Hu

“…Hybrid double-tube concrete columns (hybrid DTCCs) are a novel form of hybrid columns that combine fiber-reinforced polymer (FRP) composites with two traditional construction materials (i.e., concrete and steel). Hybrid DTCCs consist of an outer FRP tube and an inner steel tube aligned concentrically, with the space between the two tubes and inside of the steel tube filled with concrete. …”
Get full text

Fatigue fracture mechanism of Ni-base superalloy GH4065A at elevated temperatures by LI Linhan, ZHANG Ji, ZHANG Wenyun, TIAN Qiang, QIN Heyong, ZHANG Beijiang

Get full text

Experimental and Analytical Study on the Longitudinal Shear Bond Behaviour of Basalt Textile-Reinforced Concrete Composite Slab by Aniket Shirgaonkar, Yogesh Patil

“…The main constituent materials of a composite slab are profiled deck steel sheet and concrete. Profiled steel sheet serves two purposes: it acts as a main reinforcing structural element as well as a permanent formwork during the construction phase. …”
Get full text

Experimental Study on Lateral Bearing Mechanical Characteristics and Damage Numerical Simulation of Micropile by Ning Liu, Yi-Xiong Huang, Bo Wu, Wei Huang

“…The result shows the following: (1) the micropile specimens with external steel pipe had better flexural performance than the bare micropiles and the mechanical characteristics of the specimens changed from brittleness to plasticity; (2) the degree of concrete damage is greatly reduced after the external steel pipe is attached, and the bearing capacity of the micropile specimen of the same diameter is increased by 70% after the external steel pipe is added; and (3) the specimens were mainly damaged due to tensile damage. …”
Get full text

Experimental and numerical study on seismic behaviors of SRC column-RC slab joints in NPP by Dayang Wang, Qiang Liu, Yuanqi Song, Yong Zhu, Yongshan Zhang

“…This paper presents an innovative design of a steel-reinforced concrete (SRC) column-reinforced concrete (RC) slab joint based on a concept of the strong column and weak slab. …”
Get full text

COMPUTER HYDRODYNAMICS OF THE MELT AND POWDER CARBONIC MATERIALS MIXING IN BOWL by A. N. Chichko, N. V. Andrianov, S. V. erletskij, D. M. Kukuj, V. F. Sobolev, Ju. V. Jatskevich, O. I. Chichko

“…The mathematical mechanism for modeling of the mixing processes of melts and powder materials, assumed as a basis of the out-of-furnace steel processing, is presented. The computer calculations of the melt speed fields, formed in the industrial bowl of the Belorussian metallurgical works, are given and analyzed.…”
Get full text

STRUCTURE AND PROPERTIES OF CAST INSERTS OF CHROME-MANGANESE ALLOYS OF TRANSITIONAL CLASS FOR THE COMBINED MILL FETTLINGS by G. V. Levchenko, O. E. Svistelnik, V. L. Pluta, A. B. Sychkov, A. N. Emelushin, A. M. Nesterenko

Get full text

Developing a Higher Performance and Less Thickness Concrete Pavement: Using a Nonconventional Concrete Mixture by Fady M. A. Hassouna, Yeon Woo Jung

“…In this study, a new concrete mixture was developed using specific amounts of steel fibers and steel slag (as a supplementary cementing material to replace a part of the cement). …”
Get full text

Test on Hysteretic Behaviour of Prestressed Composite Joints with Concrete-Encased CFST Columns by Kun Wang, Huihui Luo

“…Four composite joint specimens consisted of concrete-encased steel beams and concrete-encased concrete-filled steel tube (CFST) columns were tested under lateral cyclic loading, in which three specimens were prestressed and the other was not. …”
Get full text

Effect of Heat Treatment on Performance of 2205 Base Equipment and Pipes by Yajun Li, Nan Liu, Li Tian, Xuemei Lu, Yanjiao Li

“…ABSTRACT 2205 dual‐phase stainless steel is widely used in petrochemical equipment. …”
Get full text

Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading by Asmaa Sobhy, Louay Aboul Nour, Hilal Hassan, Alaaeldin Elsisi

“…Glass fiber reinforced polymer (GFRP) rebar was used to reinforced the second joint model for both longitudinal reinforcement and steel stirrups, and the third joint model was designed with hybrid steel/GFRP reinforcement for the longitudinal reinforcement and steel stirrups. …”
Get full text

基于可靠度的组合桥梁设计及维护策略(英文) by 张慕圣, 陈锐斌

“…Currently,the design practice of highway bridges around the world are moving towards limit states design,a reliability-based design procedure.Canadian Highway Bridge Design Code（CHBDC）is the first design code entirely developed based on limit states design philosophy,including foundations and FRP components.However,reliability of a structure decreases in service due to environmental attacks and material deterioration such as fatigue,corrosion and many other reasons.Therefore,the structure should be inspected periodically,and the reliability of the structure should be evaluated according to its age and field data.If its reliability is reduced to a certain level,a repair should be scheduled as well as some preventive maintenance measures should be implemented to prevent further deterioration.Recently,many research works have been conducted to investigate reliability-deterioration mechanisms for each type of infrastructure and its components,optimize the inspection and maintenance strategy,predict remaining service life,estimate its life cycle cost.This paper is focused on the study of reliability-deterioration mechanisms of slab on steel girder bridges due to fatigue and corrosion of steel girders as well as corrosion of reinforcement in the deck slab.Examples will also be given to illustrate the proposed life cycle management strategy for composite slab on steel girder bridges.…”
Get full text

Estimating the Tensile Strength of Ultrahigh-Performance Fiber-Reinforced Concrete Beams by In-Hwan Yang, Changbin Joh, The Quang Bui

“…The tensile behavior of ultrahigh-performance fiber-reinforced concrete (UHPFRC) depends on the dispersion and orientation of steel fibers within the concrete matrix. The uneven dispersion of randomly oriented steel fibers in concrete may cause differences in the tensile behavior between material testing specimens and beams. …”
Get full text

Safety Management in Sea Reclamation Construction: A Case Study of Sanya Airport, China by Jinchao Ma, Wei Zhong, Xiaoliu Zhu

“…Owing to their large size, the steel cylinders have been divided into different segments, and an assembly jig is employed to ensure a safe production process. …”
Get full text

APPLICATION OF SURFACE SEWAGE WATER IN PRODUCTION by A. I. Pankovets, S. V. Miroevskij

Get full text

Corrosion Localization Analysis in T-Shape Pipe Junction Based on Multielectrode Current Measurements by Georgii S. Vasyliev

“…The water flow rate and galvanic current distribution in the T-shape junction of steel pipes were investigated using the multielectrode array approach. …”
Get full text

Response characterization on the microstructure, and mechanical and corrosion behavior of clad rebars of different weld materials by Zecheng Zhuang, Xuehai Qian, Lei Zeng, Weiping Lu, Zhen Li, Yong Xiang

“…Clad rebar is a new bimetal composite material, and optimizing the welding parameters of clad rebars could improve the welding process. The cladding steel was welded with 70S-6 carbon steel (CS), 201 stainless steel (SS), 304 SS, and 2209 duplex stainless steel (DSS). …”
Get full text

LOCAL MONITORING OF THE UNDERGROUND WATERS QUALITY AT BELORUSSIAN METALLURGICAL WORK by S. I. Shipilova, I. I. Prokopjuk

Get full text