Application of Anti-slide Piles in Embankment Reconstruction Work on Soft Soil Foundation by YU Minlin

“…In order to study the influence of anti-slide pile layout on the anti-slide stability of the embankment reconstruction work on soft soil foundation,taking the Xindian section of Fenghua River embankment in Ningbo as the research object,this paper analyzes the anti-slip stability safety coefficient of the embankment with different length and spacing of anti-slides piles by the finite element software ABAQUS and the strength reduction method.The calculation results show that:The pile in shorter length may not have anti-slide effect yet.When the pile length increases the anti-slide stability safety factor decreases and then tends to be constant with the increase of pile spacing.Under the same pile spacing,the anti-slide stability safety factor of embankment increases and then also tends to be constant with the increase of pile length.Finally,by fitting the curve of anti-slide stability safety coefficient to the pile length and pile spacing,the piles with proper length and spacing are applied in this work.…”
Get full text

Dynamics Analysis of the Integral Centrifugal Compressor High-speed Shaft Rotor by Yang Linjie, Wu Luji, Li Yufeng, Cao Zhigang, Wang Jingyuan

“…In order to improve the stability and reliability of the integral centrifugal compressor high-speed gear shaft rotor,the dynamics model of the high-speed shaft rotor is established by the professional analysis software. The influence factors of the impeller and the bearings on the dynamics performance of the rotor is analyzed. …”
Get full text

Internationalization and Relationships in Supply Chains by Adriana Troczinski Storti, Ely Paiva, Luciana Marques Vieira

“…The method included personal interviews and lexical analysis carried out using data analysis software. The results suggest that the external environment and the strategies adopted have an effect on the types of relationship found in the supply chains analyzed. …”
Get full text

Solving the Complexity Problem in the Electronics Production Process by Reducing the Sensitivity of Transmission Line Characteristics to Their Parameter Variations by Talgat R. Gazizov, Indira Ye. Sagiyeva, Sergey P. Kuksenko

“…To achieve this aim we used an effective simulation technique and software tools. Taken together, for the first time, they have allowed formulating general approach which is relevant to solve a wide range of similar tasks.…”
Get full text

Global exponential synchronization of discrete-time high-order BAM neural networks with multiple time-varying delays by Er-yong Cong, Li Zhu, Xian Zhang

“…These exponential synchronization conditions are very simple and convenient for verification based on standard software tools (such as YALMIP). Lastly, an instance is presented to demonstrate the validity of the theoretical findings.…”
Get full text

Key Challenges for Indigenous Peoples of Canada in terms of Oral Health Provision and Utilization: A Scoping Review by Ahmed Hussain

“…The data were analyzed using NVIVO software to facilitate understanding of the major themes, subthemes, and codes provided. …”
Get full text

STUDY ON DYNAMIC CHARACTERISTICS OF END-TOOTHED CONNECTION ROTOR CONSIDERING CONTACT EFFECT by YANG ZhengLie, WANG AiLun, ZHANG HaiBiao, MA Wu, WANG Hai

“…Aiming at the problem that the finite element analysis software can’t deal with the nonlinear characteristics such as elastoplastic element in modal analysis,the static finite element analysis method is used to obtain the variation of the stiffness of the end tooth structure considering the surface contact with the preload force and proposed an equivalent method that can characterize the contact effect on the stiffness of the end tooth joint structure.An equivalent model of the end-toothed rotor considering contact is established.The influence of preload force on the modal and critical speed of the rotor is obtained by the modal analysis of the rotor under different preload conditions.Analysis data indicates that the equivalent method can correctly reflect the influence of contact effect on rotor stiffness in modal analysis,and the accuracy meets the requirements of engineering application.…”
Get full text

Research of Surface Reconstruction Method of Worm Gear Reverse Engineering based on Imageware and UG by Hongbin Yang, Guanyun Li, Ruiyi Li, Aijun Xu

“…Point cloud data is obtained by non-contact 3D scanner， and point cloud data is preprocessed and surface reconstructed by using reverse engineering software Imageware. The two methods of curve fitting surface and point cloud directly fitting the surface are mainly discussed， and the fitting precision and smoothness of the surface obtained by the two methods are compared， and the alignment of the reference coordinate system and subsequent solid modeling operations of the worm wheel three-dimensional model is completed in UG. …”
Get full text

Kinematics Simulation Analysis of the Non-coaxial Style Two-output Impulse Generating Mechanism based on ADAMS by Gu Wen, Du Li, Feng Jun, Chen Kui, Wei Dong

“…In order to reduce the pulsation of output angler velocity of the non-coaxial style of two-output impulse generating mechanism,by using rigid body dynamics software ADAMS for parametric modeling,and combining the MATLAB for data analysis,the variation law of the double output rod angular speed and acceleration and the institutional average,pulsation coefficient and abrupt change of angular acceleration with crank length change are obtained.Through the simulation analysis of example,the consistency of output motion and the crank speed adjustability are verified,and the variation law of the mechanism pulsation will be decrease with the increase of crank length.Finally,the impact of long-rod OE and EF change on the double output motion law of mechanism is analyzed,it is shows that,after increasing the length of the rod OE and EF,the mechanism pulsation decreased,a theoretical basis of the dimension synthesis and optimization of the impulse generating mechanism is provided.…”
Get full text

Un Grindr plus gentil ? by Sharif Mowlabocus

“…Through a close reading of Kindr and an analysis of Grindr’s design features, I explore the central tension the platform sets up between its new discourse of “kindness” and the affordances of its software. Reflecting on these contradictions between discourse and code, and between discourse and action, I suggest that Grindr promotes an ethos of “polite incivility”, an ethos that provides a method for “managing” discrimination and difference, and which forgoes sexual citizenship in favor of sexual consumption.…”
Get full text

Design and Simulation Analysis of New Plug-in Planetary Gear Hybrid Power System by Xiyang Hao, Xutao Cai, Xiaomeng Li

“…The simulation model of the PHEV is set up based on the ADVISOR software depending on the vehicle parameters of a domestic SUV，and secondary development to the control strategy of the vehicle is carried out at the same time. …”
Get full text

TRANSIENT MOTION SIMULATION AND STRESS ANALYSIS OF RECIPROCATING COMPRESSOR VALVE by WANG Yao, ZHANG JinJie, LIU JinNan, YAO ZiYun, JIANG ZhiNong

“…A mathematical model of the valve movement was established according to its structure and motion characteristics.MATLAB and ANSYS software were used to study the transient motion law and the dynamic stress distribution of mesh valve.Then the impact of spring stiffness and transition arc on valve’s stress distribution was discussed. …”
Get full text

SIMULATION AND EXPERIMENTAL RESEARCH OF ELECTRIC POWER STEERING SYSTEM BASED ON MULTI-BODY DYNAMICS by LI Cheng, LI Min, WANG AiGuo, CHENG Yu

“…The steering simulation test was carried out by using ADAMS software. The accuracy of the model was verified. Relationship between steering wheel input torque and EPS output torque were compared and analyzed under different conditions with and without assistance. …”
Get full text

TIME-DEPENDENT RELIABILITY ANALYSIS OF FANS IMPELLER STRUCTURE BASED ON THE PROBABILITY DENSITY EVOLUTION THEORY (MT) by FAN XuMing, LI CeCe, WANG YingJian, YANG HuanHong, ZHANG Liang, ZHANG Shuang

“…The Abaqus finite element analysis software is developed again. Through the joint simulation of Matlab and Abaqus, the whole process batch simulation analysis of model building, stress analysis, result extraction and probability density evolution is realized. …”
Get full text

ANALYSIS OF OSCILLATING ROD OF HORIZONTAL LOGARITHM PERIOD ANTENNA UNDER WRAP ICE by SONG ZongFeng, WANG ZuoXiang, GUO Wei

“…Analysis of oscillating rod of rigid structure horizontal log-periodic antenna under wrap ice was performed,due to winter weather oscillating rod is bent,somewhere in the north in February 2014.In the finite element software ANSYS platform,to wrap the ice thickness,wrap ice when wind speed is known conditions,a detailed analysis of wrapped ice of bending oscillating rod was performed.The results show that the actual thickness beyond the design wrapped ice thickness.So cause the wrap ice load and wind load area increases,beyond the oscillating rod and its cable carrying capacity,resulting in instability of the oscillating rod bent.According to the oscillating rod bent reason,in order to meet the requirements of heavy ice wrapped,the improved design of the oscillating rod was proposed.…”
Get full text

Reference frame list optimization algorithm in video coding by quality enhancement of the nearest picture by Junyan HUO, Ruipeng QIU, Yanzhuo MA, Fuzheng YANG

“…Interframe prediction is a key module in video coding, which uses the samples in the reference frames to predict those in the current picture, thus helps to represent the complex video by transmitting a small amount of the prediction residual.In lossy video coding, the qualities of reference frames are affected by the quantization distortion, which lead to poor prediction accuracy and performance degradation.Targeted at the low latency video services, a reference frame list optimization algorithm was proposed, which enhanced the quality of the nearest reference frame by a deep learning-based convolutional neural network, and integrated the enhanced reference frame into the reference frame list to improve the accuracy of interframe prediction.Compared with H.265/HEVC reference software HM16.22, the proposed algorithm provides BD-rate savings of 9.06%, 14.92% and 13.19% for Y, Cb and Cr components, respectively.…”
Get full text

A Dynamic and Energy-Efficient Clustering Algorithm in Large-Scale Mobile Sensor Networks by Changlin Ma, Nian Liu, Yuan Ruan

“…It makes the whole system adapt to the random mobility of sensor nodes. The NS2 software is used to simulate the new clustering algorithm. …”
Get full text

MAPPING OF SALTWATER INTRUSION AT IGBOKODA, SOUTHWESTERN, NIGERIA USING COMBINED GEOPHYSICAL AND CHEMICAL TECHNIQUES by JAMES ADEGOKE, WILFRED IGBOAMA, EMMANUEL ADETUWO

“…The VES data was interpreted by the method of partial curve matching and computer iteration technique using Winresist software. The result obtained revealed four geoelectric layers. …”
Get full text

Towards a Pattern Language Approach to Document Description by Robert Waller, Judy Delin, Martin Thomas

“…Pattern libraries, originating in architecture, are a common way to share design solutions in interaction design and software engineering. Our aim in this paper is to consider patterns as a way of describing commonly-occurring document design solutions to particular problems, from two points of view. …”
Get full text

RESEARCH ON NUMERICAL SIMULATION METHOD OF THREAD CONNECTION BASED ON FINITE ELEMENT METHOD by JI FangFang, WANG YuBin, LIU Xia

“…A method of forced angular displacement loading based on ABAQUS software is proposed. In order to improve the efficiency of pretreatment, the type of model elements is selected as C3 D8 R and C3 D10 M suitable for contact analysis according to the structural characteristics of the threaded joints. …”
Get full text