Intelligent and open new generation telecom service architecture and its key technologies by Jianxin LIAO, Hao ZHANG, Tong XU, Lingfei NI, Jingyu WANG, Wenfu WU

“…For complex heterogeneous networks,IOTSA (intelligent and open telecom service architecture) based on the comprehensive decoupling of service systems was proposed,as well as core mechanisms such as intelligent scheduling of network resources,dynamic service orchestration and combination,and intelligent monitoring of abnormal behavior.Through the establishment of a three-level interface and four-layer capability opening architecture,multi-granular capability opening and comprehensive resource sharing were realized,which met the needs of multiple scenarios.Key technologies such as low-risk and low-cost rapid decoupling of service systems and dynamic coordination of multiple services were proposed.These achievements had formed a series of international standards and had been applied on a large scale on existing networks.By providing a large number of ultra-fine-grained capabilities,396 atomic capabilities,and flexible composite capabilities,the development of operator and third-party services and applications were strongly supported.…”
Get full text

Earliness and morphotypes of common wheat cultivars of Western and Eastern Siberia by S. E. Smolenskaya, V. M. Efimov, Y. V. Kruchinina, B. F. Nemtsev, G. Y. Chepurnov, E. S. Ovchinnikova, I. A. Belan, E. V. Zuev, Chenxi Zhou, V. V. Piskarev, N. P. Goncharov

“…Principal component analysis involving our own and published data has been applied to investigate 98 commercial common wheat cultivars from Western and Eastern Siberia comparing their morphotypes; cultivar zoning time; length of the vegetation period; 1000-grain weight, and inheritance of spring growth habit. …”
Get full text

Ecological networks construction and optimization in the Longdong Loess Plateau: The advantages of self-organizing map and complex networks by Xueyu Huang, Lina Xiu, Zhixiang Lu, Jiahui Wang

“…The results showed that:(1) The optimized ecological sources were categorized into two types: carbon sink sources and grain provision sources. Ecological corridors were classified as carbon sink corridors, grain provision corridors, and cross-type corridors. …”
Get full text

Does the habitual dietary intake of adults in Bavaria, Germany, match dietary intake recommendations? Results of the 3rd Bavarian Food Consumption Survey by Florian Rohm, Nina Wawro, Nina Wawro, Sebastian Gimpfl, Nadine Ohlhaut, Melanie Senger, Christine Röger, Martin Kussmann, Kurt Gedrich, Jakob Linseisen, Jakob Linseisen

“…A major proportion of the adult population does not meet the food-based dietary guidelines; this refers to a series of food groups, including fruit and vegetables, legumes, nuts, cereal products, and especially whole grain products, as well as fresh and processed meat. …”
Get full text

Changes in Soil Organic Carbon and Enzyme Activity After Land Use Change in Northeast China by Yang Wang, Te Shan, Peng Zhang, Ming Li

Get full text

Performance evaluation of waste glass in soil improvement: Influence of particle size of waste glass on mechanical, microstructural, and durability characteristics by Harun Akoğuz

“…Subsequently, the effect of WG grain sizes on micromorphology characteristics and mineralogical phases was evaluated before and after the treatment through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and ultrasonic pulse velocity (UPV). …”
Get full text

Investigating Smartphone-Based Sensing Features for Depression Severity Prediction: Observation Study by Yannik Terhorst, Eva-Maria Messner, Kennedy Opoku Asare, Christian Montag, Christopher Kannen, Harald Baumeister

“…This process, called smart sensing, allows a fine-grained assessment of various features (eg, time spent at home based on the GPS sensor). …”
Get full text

Advances in auxin synthesis, transport, and signaling in rice: implications for stress resilience and crop improvement by Mengmeng Hou, Yuanbo Zhang, Xinyi Xu, Hao Ai

“…Additionally, advancements in understanding auxin transport and signaling pathways have highlighted their potential in optimizing tillering, root architecture, and grain yield. This review examines these molecular mechanisms and their interactions with other hormones, emphasizing their integration into breeding programs for improved rice productivity. …”
Get full text

Effect of Rapid Solidification Rates on Preparation of Ni-Pb Alloy Hollow Particles with Low Pb Content by Ka Gao, Yueyang Xu, Gaopeng Tang, Xiaoqin Guo, Rui Zhang

“…The Ni-rich phase was formed in the dendrite, and the Pb phase was distributed in the grain boundary or interdendrites. With the roller speeds increasing, the sizes of hollow particles and holes were decreased which were deviated from the particle center, while the hollow ratio, shear stress, and turbulence intensity of the hollow particles were increased. …”
Get full text

Feeding Ensiled Citrus Pulp to Finishing Pigs by J. D. Crosswhite, N. B. Myers, Adegbola T. Adesogan, Joel H. Brendemuhl, Dwain D. Johnson, Chad C. Carr

“…For the past six years, feed costs have continually increased, and Florida has greater feed costs than the rest of the country because grain must be shipped here from where it was produced. …”
Get full text

The Persian light verb dādan ‘to give’: Causation and more by Reza Soltani, Mohammad Amouzadeh, Hadaegh Rezaei

“…By presenting a cognitive configuration of LVCs in Persian, the current paper can pave the way for a fine-grained theorization of typological aspects of LVCs in some other languages.…”
Get full text

Oat cultivars developed at Nemchinovka and included into the State Register in recent years (a review) by A. D. Kabashov, I. G. Loskutov, N. M. Vlasenko, Ya. G. Leibovich, A. S. Markova, Z. V. Filonenko, L. G. Razumovskaya

“…The main trend in crop breeding is to increase productivity and improve grain quality indicators. The formation of high crop productivity requires cultivars with high potential for productivity and quality as well as with resistance to biotic and abiotic environmental factors. …”
Get full text

Formal modeling and security analysis method of security protocol based on CPN by Xiang GONG, Tao FENG, Jinze DU

“…To solve the problem of modeling and analyzing with colored Petri net (CPN), which was determining vulnerabilities in hole location but couldn’t identify any attack path, and the problem of when the introduction of the attacker model, the number of possible message paths in the CPN formal model of security protocol surges the state space prone to explosion, which made it difficult to extract accurate attack paths, the formal modeling method of security protocol was improved base on CPN, the attack paths were verified and extracted, further the fine-grained protocol modeling and control were adopted.As well as in the aspect of state-space convergence, and a waiting-sync method for different processes of CPN model in each hierarchy model was proposed, which effectively controlled the state-space scale of the model.Through the security evaluation and analysis of TMN protocol, 25 attack paths of the protocol are extracted successfully, the security of the protocol is evaluated, and the effectiveness of the proposed method is proved.…”
Get full text

Effects of Additives and Sintering Time on the Microstructure of Ni-Zn Ferrite and Its Electrical and Magnetic Properties by Abdollah Hajalilou, Mansor Hashim, Halimah Mohamed Kamari

“…The results indicate that grain growth occurred by increasing sintering time from 15 to 270 min in the two types of samples prepared in this study although it was greatly impeded by the additive oxides. …”
Get full text

Effect of cold rolling rates on microstructure and corrosion behavior of selective laser melted 316L austenitic stainless steel bipolar plates by Zhiyue Shi, Rui Wang, Jin Qin, Yan Kang, Zhiqiang Yu, Zhijie Yan, Shaohua Zhang, Wei Zhang

“…The results indicate that cold deformation results in an increase in the fraction of low-angle grain boundaries (LAGBs), which significantly enhances corrosion resistance of SLMed 316L ASS. …”
Get full text

Influence of rotation speed on the corrosion behavior of friction stir welded joints in AZ31 magnesium alloy by Ziru Zhou, Shujin Chen, Michael Hodgson, Wei Gao, Yuxin Wang

“…This phenomenon results from the small grain structure and finer Al–Mn compounds formed during welding, influenced by heat and mechanical action under specific conditions.…”
Get full text

Synergistic effects of heterostructure and pre-deformation on precipitation and corrosion behaviors of Al–Zn–Mg–Cu alloys by Jinming Zhi, Mingxing Guo, Tongbo Wang, Wen Meng, Wei Zhou, Linzhong Zhuang, Huafen Lou

“…The complex interactions that occur among the soft/hard micro-scale zones, intragranular/grain boundary precipitation, and homogeneous/heterogeneous nucleation lead to differences in precipitation and corrosion resistance for different microstructures. …”
Get full text

Feeding Ensiled Citrus Pulp to Finishing Pigs by J. D. Crosswhite, N. B. Myers, Adegbola T. Adesogan, Joel H. Brendemuhl, Dwain D. Johnson, Chad C. Carr

“…For the past six years, feed costs have continually increased, and Florida has greater feed costs than the rest of the country because grain must be shipped here from where it was produced. …”
Get full text

Fabrication and Electrical Characterization of Translucent Bi12TiO20 Ceramics by D. J. Santos, L. B. Barbosa, R. S. Silva, Z. S. Macedo

“…This procedure yielded translucent ceramics with relative density of 99.2±0.5% and average grain size of 3.1±1.6 μm. Samples with 0.5 mm thickness were translucent with optical transmission of about 30% at 800 nm. …”
Get full text

3D data augmentation and dual-branch model for robust face forgery detection by Changshuang Zhou, Frederick W.B. Li, Chao Song, Dong Zheng, Bailin Yang

“…We propose Dual-Branch Network (DBNet), a novel deepfake detection framework that addresses key limitations of existing works by jointly modeling 3D-temporal and fine-grained texture representations. Specifically, we aim to investigate how to (1) capture dynamic properties and spatial details in a unified model and (2) identify subtle inconsistencies beyond localized artifacts through temporally consistent modeling. …”
Get full text