-
1701
A New Fractal-Based Miniaturized Dual Band Patch Antenna for RF Energy Harvesting
Published 2014-01-01“…In addition to miniaturization and dual band nature, the proposed antenna also removes unwanted harmonics without the use of additional filter component. Using a finite-element-method-based high frequency structure simulator (HFSS), the antenna is designed and its performance in terms of return loss, impedance matching, radiation pattern, and voltage standing wave ratio (VSWR) is demonstrated. …”
Get full text
Article -
1702
Flexural Behavior of Unbonded Prestressed Concrete Bridge Girders
Published 2021-01-01“…Subsequently, three-dimensional finite element (FE) models are built and validated by experiments to investigate the effect of different design parameters on flexural behavior of bridge girders. …”
Get full text
Article -
1703
Near-Fault Ground Motion Impacts on High-Speed Rail Large-Span Continuous Girder Bridge considering Pile-Soil Interaction
Published 2022-01-01“…Based on the p-y model for simulating pile-soil interaction, the moment-curvature analysis program XTRACT is used to calculate the moment and curvature of bridge piers and pile foundation sections, and the finite element (FE) software is used to establish two nonlinear global bridge models under seismic effects in the high-intensity zone, one considering pile-soil interaction and one without considering pile-soil interaction. …”
Get full text
Article -
1704
Numerical Estimation of Effective Mechanical Properties for Reinforced Plexiglas in the Two-Dimensional Case
Published 2016-01-01“…Numerical calculations were performed with the help of CAE Fidesys using the finite element method. The dependence of the effective properties of reinforced plexiglas upon the concentration of wires and the shape of wire cross section is investigated. …”
Get full text
Article -
1705
From Antenna Design to High Fidelity, Full Physics Automotive Radar Sensor Corner Case Simulation
Published 2018-01-01“…This paper provides a complete, full physics simulation workflow for automotive radar using finite element method and asymptotic ray tracing electromagnetic solvers. …”
Get full text
Article -
1706
Multi-Structure-Based Refractive Index Sensor and Its Application in Temperature Sensing
Published 2025-01-01“…The characterization of nanoscale sensors is considered using an approximate numerical method (finite element method). The simulation results show that the sharp asymmetric resonance generated by the interaction between the discrete narrow-band mode and the continuous wideband mode is called Fano resonance. …”
Get full text
Article -
1707
A New Method to Measure Crack Extension in Nuclear Graphite Based on Digital Image Correlation
Published 2017-01-01“…Finally, the results were verified using the finite element method.…”
Get full text
Article -
1708
A Study on the Application of Two Different Material Constitutive Models Used in the FE Simulation of the Cyclic Plastic Behavior of a Steel Beam-Column T-Stub Connection
Published 2021-01-01“…Seismic actions inevitably cause cyclic plastic deformations in steel frame connections, which is a common cause of failure in steel structures. Nonlinear finite element (FE) static analysis has been employed in the study of the cyclic plastic behavior of a T-stub connection based on the reported cyclic test on the corresponding extensively tested T-stub connection made of Q235 steel. …”
Get full text
Article -
1709
Numerical Simulation and Optimization Design of End-Suspended Pile Support for Soil-Rock Composite Foundation Pit
Published 2021-01-01“…Based on the measured data, a finite element model was established through the two-dimensional numerical simulation method to study the deformational characteristics of the end-suspended piles, and the influences of the depth of socketed rock, the width of rock shoulder, and the prestress of anchor cables on the deformations and mechanical property of end-suspended piles were discussed. …”
Get full text
Article -
1710
Experimental Study and Proposal to Improve the EWM Design of Cold-Formed Steel Lipped Channel Columns with Circular Holes under Axial Compression
Published 2021-01-01“…Then, the experimental results were used to validate a nonlinear finite element model (FEM) previously developed by the authors. …”
Get full text
Article -
1711
Nonlinear Simulation and Vulnerability Analysis of Masonry Structures Impacted by Flash Floods
Published 2021-01-01“…A new Structured ALE (S-ALE) solver in an explicit finite element platform LS-DYNA was applied. Thirty different scenarios, including two different FE models, three different water depths, and five different flow velocities, were studied. …”
Get full text
Article -
1712
Design Optimization for Vibration Reduction of Viscoelastic Damped Structures Using Genetic Algorithms
Published 2009-01-01“…To demonstrate the applicability of genetic algorithms (GAs), the approach is applied to a simple viscoelastically damped constrained-layer beam. To that end, a finite element model (FEM) derived by Zapfe, which was based on Rao's formulation, was used for a beam with constrained-layer damping. …”
Get full text
Article -
1713
Establishment and Application of Stochastic Mesoscopic Concrete Model
Published 2022-01-01“…This paper presents algorithms for generating two-dimensional (2D) and three-dimensional (3D) arbitrarily graded stochastic concrete aggregate models, graphical format conversion methods, and finite element applications. Aggregate shapes include circular, ellipsoidal, convex polygon, ellipsoidal, and spherical. …”
Get full text
Article -
1714
Numerical Study of the Effect of Transverse Reinforcement on Compressive Strength and Load-Bearing Capacity of Elliptical CFDST Columns
Published 2024-02-01“…The results obtained from this study are in good agreement with the results of previous studies and showed that the finite element method can provide accurate behavior of these columns. …”
Get full text
Article -
1715
Test and Numerical Study on Monotonic Behavior of Complex CFT Column Joints
Published 2019-01-01“…Test phenomena and load-stress curves show that all three types of joints have a considerable load-carrying capacity and joint rigidity. Finite element (FE) analysis is adopted, and the stress distribution shows good agreement with test data. …”
Get full text
Article -
1716
Investigation on Dynamic Propagation Characteristics of In-Plane Cracks in PVB Laminated Glass Plates
Published 2016-01-01“…In the meantime, the extended finite element method (XFEM) is introduced to analyze the crack propagation mechanism of laminated glass based on dynamic stress intensity factors (DSIFs) and propagations of stress waves. …”
Get full text
Article -
1717
Flexure Behaviour of Corroded Reinforcement Concrete Beams Under Sustained Loads
Published 2024-12-01“…Two experimental datasets from existing literature were selected to build a nonlinear finite element model. The selected beams were tested under four-points sustained bending load and three bending point flexural test with deferent level of corrosion. …”
Get full text
Article -
1718
Amplification Effect of Ground Motion in Offshore Meandering Sedimentary Valley
Published 2021-01-01“…Taking a sinusoidal curved valley site as a model, the dynamic finite element analysis method and the introduction of a viscoelastic artificial boundary were developed to study the 3D seismic response of the dimensional topographies in the homogeneous curved valley to vertical incident P, SV, and SH waves. …”
Get full text
Article -
1719
Random Vibration Analysis of Train Moving over Slab Track on Bridge under Track Irregularities and Earthquakes by Pseudoexcitation Method
Published 2015-01-01“…The track and bridge is simulated by a rail-slab-girder-pier interaction finite element model. The coupling equations of motion are established based on the wheel-rail interaction relationship. …”
Get full text
Article -
1720
Experimental and Numerical Investigation on Seismic Performance of RC Exterior Beam-Column Joints with Slabs
Published 2022-01-01“…The slab has a positive effect on the energy dissipation capacity of the joint but has a negative effect on the load carrying capacity. In addition, finite element (FE) analysis of the tested specimens was conducted. …”
Get full text
Article