Research on Meshing Stiffness and Vibration Response of Pitting Fault Gears with Different Degrees by Jie Liu, Chengye Wang, Wenchao Wu

“…At the same time, the meshing stiffness of pitting gears with different degrees is analyzed by finite element method, and the validity of the calculation results with potential energy method is verified. …”
Get full text

Impact of Brake Pad Structure on Temperature and Stress Fields of Brake Disc by Guoshun Wang, Rong Fu

“…Utilizing ABAQUS finite element software, the study established the relationship between a brake pad structure and distributions of temperature and thermal stress on brake disc. …”
Get full text

Mechanical Behavior of Chain-Link Wire Nets under Pressure from a Warhead: Quasistatic Experiments and Simulations by Min Wang, Shuai Zhou, Qilin Huang

“…Then, the numerical approach and Finite element (FE) model were developed, considering the contacts between the steel wires in the inner connections, the contacts between the warhead and the mesh of the wire nets, and the fracture of the steel wire material. …”
Get full text

Experimental and Numerical Investigations on Deformation of Cylindrical Shell Panels to Underwater Explosion by K. Ramajeyathilagam, C.P. Vendhan, V. Bhujanga Rao

“…The plastic deformation of the panels was measured for three loading conditions. Finite element analysis was carried out using the CSA/GENSA [DYNA3D] software to predict the plastic deformation for various loading conditions. …”
Get full text

Double-UV Photoionizaion Detector with Graphene Oxide-Coated Electrodes by Qi Zhou, Xu Zhang, Xu Ma, Sixiang Zhang

“…At the same time, the air flow field of the detector was simulated by the finite element method. Through analyzing the results of the simulation experiment, further optimization of the gas channel for the microdetector was carried out, and the ionization chamber with axial flow structure was finally chosen. …”
Get full text

Progressive Failure Analysis of Laminated CFRP Composites under Three-Point Bending Load by Bing Shen, HongJun Liu, Shengli Lv, Zheng Li, Wen Cheng

“…Numerical simulations were performed using ABAQUS finite element software and UMAT user subroutines and verified by three-point bending tests. …”
Get full text

Layerwise generalized formulation solved via a boundary discontinuous method for multilayered structures. Part 1: Plates by Laureano Ronaldo Walter, Mantari José Luis

“…The high accuracy of the proposed solution is demonstrated by comparing the results with three-dimensional finite-element model (FEM) solutions of multilayered and sandwich plates for various side-to-thickness ratios. …”
Get full text

A Modified Equation Approach to Selecting a Nonstandard Finite Difference Scheme Applied to the Regularized Long Wave Equation by E. Momoniat

“…Comparisons to the single solitary wave solution show significantly better results, measured in the L2 and L∞ norms, when compared to results obtained using a Petrov-Galerkin finite element method and a splitted quadratic B-spline collocation method. …”
Get full text

Vibration Behaviour Analysis and Vibration Suppression Studies of the Space Robot by Tian Yong, Yue Xiang, Feng Yan, Jiang Binzhang

“…First, the joint was simplified to a linear torsion spring, and the flexible rod was modelled using the finite element method, resulting in a flexible motion model of the robot. …”
Get full text

Closure Scheme Analysis of 3 × 70 m Bearingless Integral Rigid Frame Bridge of Fuzhou Xiamen High-Speed Railway by Fangwen Weng, Xiangui Li

“…In order to select the optimal closure scheme, this article establishes the finite element model of the whole bridge and analyzes the whole construction process according to the working conditions and the mechanical state of the bridge before closure is obtained. …”
Get full text

The Influence of the Track Parameters on Vibration Characteristics of Subway Tunnel by Wenbo Shi, Linchang Miao, Junhui Luo, Honglei Zhang

“…A nonlinear coupling model of wheel-track and a finite element calculation model of tunnel and soil were established based on the mechanical character of elastic supporting block ballastless track and the actual parameters of Nanjing soft soil. …”
Get full text

A Generalized Multiconductor Transmission Line Model and Optimized Method for the Solution of the MTL Equations by Chaoqun Jiao, Zhanjun Xia, W. N. Fu

“…Then, the optimized solution based on Time domain finite element method (TDFEM) is developed for the above MTL equations. …”
Get full text

Dual-Element PIFA Design with Dual Shorting Pins for Multiband Communication Devices by Muhammad Sajjad Ahmad, Che Young Kim

“…The proposed antenna design is simulated with commercially available software, which is based on the finite element method. The resonant frequency bands covered are GSM850/900, DCS1800, PCS1900, UMTS2100, and LTE2300/2600 MHz. …”
Get full text

Wind-Induced Response Analysis for a Fatigue-Prone Asymmetric Steel Arch Bridge with Inclined Arch Ribs by You-Hua Su, Yan-Ru Wu, Qing Sun

“…The wind-induced stress of the bridge hangers under different wind directions is obtained based on the finite element method. The influential factor of the stress distribution of the bridge hangers on both the windward side and the leeward side is discussed. …”
Get full text

Development of axisymmetric shell model for creep deformation analysis of reactor pressure vessel lower head by Jang Min Park, Kukhee Lim

“…The analysis results using the developed model are compared with those of finite element analysis, considering deformation history, stress distribution, and deformed shape. …”
Get full text

Study on the Bearing Capacity of High-Cap Inclined Pile Foundations by Guodong Shao, Juan Liu, Tonglei Wang, Yuping Liu

“…To analyze the bearing capacity of high-cap inclined pile foundations based on foundation design in practical engineering, finite element models of single cap foundations and multi-cap foundations are established. …”
Get full text

Computer Simulations of Contact Forces for Airbags with Different Folding Patterns During Deployment Phase by King H. Yang, Yun-Qiang Li, Danyu Sun

“…An explicit finite element method was used to study the neck load and the contact force between an occupant and an airbag during an out-of-position frontal automobile crash. …”
Get full text

Solving Scattering from Conducting Body Coated by Thin-Layer Material by Hybrid Shell Vector Element with Boundary Integral Method by Lin Lei, Jun Hu, Hao-Quan Hu

“…The finite element boundary integral (FEM-BI) method is widely used in the scattering and radiating problems. …”
Get full text

Study on Temperature Field Massive Concrete in Early Age Based on Temperature Influence Factor by Min Zhang, Xianhua Yao, Junfeng Guan, Lielie Li

“…In order to solve the problem of insufficient accuracy of early temperature field caused by the change of hydration rate under different temperatures, the theoretical formula of finite element calculation based on temperature influence factor is put forward and then the theory is tested. …”
Get full text

Study on Sunshine Stress Effect of Long-Span and Wide Concrete Box Girder by Wang Cheng, Zhang Chentian, Li Shuo, Li Jianhua

“…In order to further clarify the sunshine stress effect of long-span and wide concrete box girder, the study selected a concrete box girder with 4×42 m span and 33.5 m width, formed the temperature field load through a field test and numerical simulation, established a numerical analysis model by using the finite element program of ANSYS, and comprehensively analyzed the longitudinal temperature stress distribution of a long-span and wide concrete box girder under sunshine. …”
Get full text