-
701
Influence of Acid Modification Multiwall Carbon Nanotube Counter Electrodes on the Glass and Flexible Dye-Sensitized Solar Cell Performance
Published 2016-01-01“…Unmodified- and modified-carbon nanotubes were coated on the conductive glass and conductive plastic substrates by a slurry paste method, and they were used as the counter electrodes (CEs) of dye-sensitized solar cells (DSSCs). Scanning electron microscopy reveals that carbon nanotubes are evenly deposited on the conductive glass. …”
Get full text
Article -
702
Biomolecule Protective and Photocatalytic Potential of Cellulose Supported MoS2/GO Nanocomposite
Published 2023-01-01“…Particle size and morphology of the nanocomposite were assessed by scanning electron microscopy (SEM), and it was found having particle size ranging from 50 to 80 nm and heterogeneous structure. …”
Get full text
Article -
703
Experimental study on influence of Na-bentonite on viscosity of cement-bentonite slurry
Published 2025-07-01“…Based on these results, microscopic tests, including X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and field emission scanning electron microscopy (FESEM), were conducted to explain the reasons for the different properties of different bentonite slurries and their CB slurries. …”
Get full text
Article -
704
Properties of Cu(In,Ga)Se2 Thin Films and Solar Cells Deposited by Hybrid Process
Published 2012-01-01“…The films were characterized by energy-dispersive X-ray spectroscopy, glancing incidence X-ray diffraction, scanning electron microscopy, auger electron spectroscopy, and transmittance and reflectance spectroscopy, and their properties were compared to the ones of films deposited by coevaporation. …”
Get full text
Article -
705
Effects of multidrug-resistant bacteria and multi-antibiotic combination on intestinal microbiota in mice
Published 2025-02-01“…Small intestine is the main colonization site of antibiotic-resistant bacteria, and Proteobacteria and Bacteroidetes are the major antibiotic-resistance acquired bacteria as determined by transmission electron microscopy and agarose plate screening culture.…”
Get full text
Article -
706
The Effect of Yttrium Addition on the Microstructures and Electrical Properties of CuMn Alloy Thin Films
Published 2019-01-01“…The phase variation, microstructure, film thickness, and constitutional analysis of CuMnY films were characterized using X-ray diffraction, field emission scanning, and high-resolution transmission electron microscopy and related energy dispersive X-ray analyses (XRD, FESEM, and HRTEM/EDX). …”
Get full text
Article -
707
Encapsulation of albumin from snakehead fish (Channa striata) with porous starch from arrowroot (Maranta arundinacea)
Published 2025-03-01“…The P-50, porous starch:gum arabic (50:50) formula demonstrated the highest encapsulation efficiency of 98.88 %. Scanning electron microscopy revealed that porous starch adsorbs albumin on its surface. …”
Get full text
Article -
708
Does Modification of Amalgomer with Propolis Alter Its Physicomechanical Properties? An In Vitro Study
Published 2020-01-01“…Representative specimens of each group were analyzed by Fourier-transform infrared spectroscopy, energy-dispersive X-ray, X-ray diffraction, and scanning electron microscopy. Analysis of variance (ANOVA) was used to compare the results, followed by a Tukey post hoc test (p<0.05). …”
Get full text
Article -
709
Bioimmobilized Limestone Powder for Autonomous Healing of Cementitious Systems: A Feasibility Study
Published 2018-01-01“…To examine the microstructure and characterization of healing precipitate, micrographical (field emission scanning electron microscopy), chemical (energy dispersive X-ray), and thermal (thermogravimetric analysis) analyses were performed after the healing period of 28 days. …”
Get full text
Article -
710
Effect of Different Impression Techniques on Marginal Fit of Restoration – An In Vitro Study
Published 2023-07-01“…Prosthesis was fabricated using CAD/CAM technology and marginal accuracy was evaluated using scanning electron microscopy (SEM). Result: In the present study, the matrix impression system resulted in less microgap in both mid-buccal and mid-mesial region, whereas putty wash technique showed very high standard deviation in the interproximal region. …”
Get full text
Article -
711
Phase transformation and microstructure study of the as-cast Cu-rich Cu-Al-Mn ternary alloys
Published 2017-01-01“…Microstructural investigations of the prepared samples were performed by using optical microscopy (OM) and scanning electron microscopy, equipped by energy dispersive spectroscopy (SEM-EDS). …”
Get full text
Article -
712
Corrosion Behavior and Microhardness of a New B<sub>4</sub>C Ceramic Doped with 3% Volume High-Entropy Alloy in an Aggressive Environment
Published 2025-01-01“…The aim of this paper is to study both the mechanical and chemical properties of a new material composed of B<sub>4</sub>C doped with 3% volume of CoCrFeNiMo HEA by the spark plasma sintering technique. Scanning electron microscopy and microhardness were used to characterize the composite microstructure and hardness. …”
Get full text
Article -
713
Synthesis and Characterization of Zinc Sulfide-Aluminium -Platinum Nanocomposites Produced by Coprecipitation Method
Published 2025-01-01“…The proposed composite powders were thoroughly characterized using techniques like Energy-dispersive X-ray Spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Ultraviolet-Visible (UV-Vis) absorption spectroscopy, and photoluminescence analysis. …”
Get full text
Article -
714
Effect of titanium content on the microstructure and wear behavior of Fe(13-x)TixB7 (x=0-5) hardfacing alloy
Published 2022-01-01“…In addition, scanning electron microscopy (SEM) images of the worn surfaces showed that the wear mechanisms were adhesive and oxidative.…”
Get full text
Article -
715
Spontaneous Small Biskyrmions in a Centrosymmetric Rare-Earth Kagome Ferrimagnet
Published 2024-03-01“…Here, spontaneous biskyrmions were directly observed in the Tb0.2Gd0.8Co2 ferrimagnetic crystal with a Kagome lattice using Lorentz transmission electron microscopy. The high-density biskyrmions exhibited a small size (approximately 50 nm) over a wide temperature range, were closely related to subtle magnetic interaction competition, and coexisted with some broken stripes that could be easily converted into zero-field biskyrmions by utilizing proper field-cooling manipulation. …”
Get full text
Article -
716
Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling
Published 2019-01-01“…The thermal conductivity of the UHPC decreased as the unit weight of the UHPC decreased, and the thermal conductivity also decreased as the compressive strength of the UHPC decreased. Scanning electron microscopy (SEM) analysis showed that the microstructures of the UHPC specimens exposed to high temperatures contained voids due to the PP fiber melting. …”
Get full text
Article -
717
Facile Preparation of Phosphotungstic Acid-Impregnated Yeast Hybrid Microspheres and Their Photocatalytic Performance for Decolorization of Azo Dye
Published 2013-01-01“…The obtained products were characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), and ultraviolet-visible spectrophotometry (UV-Vis), respectively. …”
Get full text
Article -
718
The Creep Test Study and Macro-Detail Analysis of Argillaceous Red Sandstone in Different Water-Containing States
Published 2022-01-01“…Burgers model is used to fit the test results and identify the parameters, and scanning electron microscopy is carried out on the cross section of the damaged sample. …”
Get full text
Article -
719
Zeta Potential Change and curing effects on Shield Muck solidified by Metal Ion Complex Catalysis
Published 2025-01-01“…We analyzed the microscopic characteristics of shield muck curing products by using the electron microscopy, revealing the impact of metal ion complex on curing. …”
Get full text
Article -
720
Effect of Nanodiamonds on Friction Reduction Performance in Presence of Organic and Inorganic Friction Modifiers
Published 2024-12-01“…Analysis of wear scars using High-Resolution Transmission Electron Microscopy (HRTEM), Atomic Force Microscopy (AFM) and Raman spectroscopy reveals that when NDs are fully entrapped into the formed tribofilm that contains the MoDTC-derived MoS<sub>2</sub> layer, the lowest friction coefficient can be achieved.…”
Get full text
Article