-
6501
-
6502
A Two-Stage Robust Optimization Method Based on the Expected Scenario for Islanded Microgrid Energy Management
Published 2021-01-01“…According to the structural characteristics of the proposed model based on the E-TSRO method, a column-and-constraint generation (C & CG) algorithm is utilized to solve the proposed model. …”
Get full text
Article -
6503
Quantitative Clinical Diagnostic Analysis of Acetone in Human Blood by HPLC: A Metabolomic Search for Acetone as Indicator
Published 2016-01-01“…For acetone as its 2,4-dinitrophenylhydrazone derivative, a good separation was achieved with a ThermoAcclaim C18 column (15 cm × 4.6 mm × 3 μm) at retention time (tR) 12.10 min and flowrate of 1 mL min−1 using a (methanol/acetonitrile) water elution gradient. …”
Get full text
Article -
6504
-
6505
-
6506
-
6507
-
6508
Study on torsional vibration characteristics of compressor flexible rotors considering contact clearance
Published 2025-01-01“…The torsional vibration of reciprocating compressor crankshaft system can cause major problems such as burnt bearings and shaft fracture.In order to understand the torsional vibration response of the compressor rotor system, a torsional vibration mechanics solution method for the flexible rotor system of the compressor considering the bushing-pin collision clearance and the oil film clearance of the crankshaft-bearing was proposed, which provided a new idea and method to avoid the natural frequency of the crankshaft system.Based on the multi-body dynamics and Hertz contact theory，the torsional dynamic response of the crankshaft system with collision clearance was solved.The results show that the torsional vibration amplitude of the 4th column crank pin is the largest, the torsional angular displacement amplitude is 0.051°, and the dynamic angular velocity peak value is 156.026 rad/s.Based on this, the crankshaft-bearing oil film clearance was considered, the oil film pressure of sliding bearings was calculated by the finite difference method and the over-relaxation iterative method, and the dynamic characteristic coefficients of bearings were solved according to pressure perturbation method.The effects of the bushing-pin collision clearance and the crankshaft-bearing oil film clearance on the dynamic response of the crankshaft system were comprehensively considered in the modal analysis of the crankshaft system under preload.The resonance of the crankshaft with and without oil film clearances was compared. …”
Get full text
Article -
6509
-
6510
-
6511
Stability-Indicating HPLC Determination of Trandolapril in Bulk Drug and Pharmaceutical Dosage Forms
Published 2015-01-01“…The trandolapril was separated isocratically on Hypersil-Gold C18 column (250 mm × 4.6 mm, 5 μm) with a mobile phase consisting of 50% acetonitrile and 50% water (containing 0.025% triethylamine, pH 3.0±0.1), at 25±2°C. …”
Get full text
Article -
6512
-
6513
-
6514
Reversed-Phase Liquid Chromatographic Separation and Determination of Ni(II), Cu(II), Pd(II), and Ag(I) Using 2-Pyrrolecarboxaldehyde-4-phenylsemicarbazone as a Complexing Reagent
Published 2013-01-01“…A good separation was achieved using Microsorb C18 column (150 × 4.6 mm i.d.) with a mobile phase consisted of methanol : acetonitrile : water : sodium acetate (1 mM) (68 : 6.5 : 25 : 0.5 v/v/v/v) at a flow rate of 1 mL/min. …”
Get full text
Article -
6515
Development of an Efficient Analytical Method for the Extraction and Analysis of Biocide Contents from the Textile Test Specimens on LC-DAD
Published 2020-01-01“…Biocide contents were separated at C18 column with 0.4% acetic acid: methanol (1 : 1 v/v) under isocratic mode and detected at 280 nm wavelength. …”
Get full text
Article -
6516
-
6517
-
6518
-
6519
-
6520
