Experimental Study on the Seismic Performance of Insulated Single-Sided Composite Shear Walls under Different Shear Spans and Axial Compression Ratios by Qiang Sun, Shoufeng Zhang, Ke Liu, Xinyi Wu, Guowei Zhang, Bei Cheng

“…The new insulated single-sided composite shear wall (NISCSW) composition involves setting a precast wall panel on one side and an insulation panel on the other side, with a middle cavity for casting concrete. To investigate the seismic performance of NISCSW under different shear spans and axial compression ratios, eight specimens are made, including six composite and two cast-in-place walls. …”
Get full text

ANALYSIS OF OCCUPATIONAL TRAUMATISM IN FOUNDRY by A. M. Lazarenkov, S. A. Horeva, V. V. Melnichenko

“…The distribution of accidents in by areas of casthouses, by professions of injured persons, by age and work experience of injured persons, by reasons of traumatism is given. the dynamics of occupational traumatism in foundry in whole and in casthouses of steel, cast-iron and of nonferrous castings as well is shown.…”
Get full text

RESEARCH OF INFLUENCE OF ALLOYING BY BORON ON PROPERTIES THE IRON-CARBON ALLOYS by K. V. Kobyakov, N. F. Nevar

“…It is shown that for improvement of physical-mechanical properties of the cast products which have hard usage, the boron carbide, which can be used at carrying out process of thermo-chemical treatment of cast products of iron-carbon alloy, is of great interest.…”
Get full text

Offloading Interventions for the Management of Charcot Neuroarthropathy in Diabetes by Thomas Berhane MSc (Rehab), PostGradDip(Biomech), PostGradDip(Gait analysis), Kanakamani Jeyaraman FRACP(Endo), Mark Hamilton FRACS(Vasc), Henrik Falhammar MD, FRACP(Endo), PhD

“…Background: The use of a nonremovable patellar tendon bearing (PTB) cast in Charcot neuroarthropathy (CA) has not been well studied. …”
Get full text

Effect of low aluminum additions in the microstructure and mechanical properties of hot forged high-manganese steels by Morales-Cruz E.U., Vargas-Ramírez M., Lobo-Guerrero A., Cruz-Ramírez A., Colin-García E., Sánchez-Alvarado R.G., Gutiérrez-Pérez V.H., Martínez-Vázquez J.M.

“…Microstructural evolution was studied using microscopy techniques (OM, and SEM-EDS) and X-ray diffraction measurements for the as-cast and hot forged steels. A typical grain columnar zone formed during solidification of a cast ingot was obtained in the as-cast condition, where the microstructure consisted of nonmetallic inclusions in a fully austenitic matrix. …”
Get full text

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy by Yunlong Ding, Jialian Shi, Dongying Ju

“…In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. …”
Get full text

Impact of addition of ca on clogging of SEN and magnetic properties of non-oriented silicon steel by Kong W., Cang D.G.

“…The results showed that when SEN is clogged seriously, the casting speed has to decrease below the target casting speed and that SEN clogging can be predicted by comparing the actual value and the theoretical one of a casting speed. …”
Get full text

MODIFYING OF SECONDARY ALLOYS by V. Yu. Stetsenko

“…They promote receiving not modified microstructure and pollution of castings by nonmetallic inclusions. Effective ways of modifying of secondary alloys are the methods of the accelerated hardening of castings and hereditary modifying…”
Get full text

Nonlinear Constitutive Model of High-Temperature Viscoelastic Deformation of Gussasphalt Concrete by Shunxian Zhang, Aimin Sha, Xu Lu, Wen Nie, Weixiong Li, Junjian Yan

“…To accurately evaluate the high-temperature stability of cast asphalt concrete, based on the traditional viscoelastic mechanical model, this paper innovatively improves the traditional viscoelastic mechanical model considering the conditions of temperature and dynamic load and deduces the viscoelastic constitutive model of high-temperature deformation performance of cast asphalt concrete, using a dynamic penetration test (DPT) to regress improved the Burgers model parameters and verify the model’s applicability and reliability. …”
Get full text

Efficacy of CAD/CAM Glass Fiber Posts for the Restoration of Endodontically Treated Teeth by Maira Alejandra Gutiérrez, Camilo Alejandro Guerrero, Paula Alejandra Baldion

“…CAD/CAM glass fiber and metal cast posts had higher bond strength, lower nanoleakage, and better adaptation to the root canal. …”
Get full text

To Determination of Heating Speed of Surface Element of Module Industrial Furnace Recuperator of High-Temperature Heat Technologies at Engineering and Automotive and Tractor Plants by V. V. Shidlovsky

“…The paper contains an analysis of thermal stressed state of a cast-iron recuperator element wall in the case when a cast-iron needle recuperator operates in the state of  elasticity and elastic-plasticity.Heating speed evaluation of  heat-exchange surface at furnace start-up is given in the paper.…”
Get full text

An Analysis of the Mechanical Properties of the Ponseti Method in Clubfoot Treatment by Murtaza Kadhum, Mu-Huan Lee, Jan Czernuszka, Chris Lavy

“…To increase the efficiency of the Ponseti treatment, we discuss the theoretical possibilities of decreasing the size of the strain step and interval of casting and/or increasing the overall number of casts. …”
Get full text

Low thermal expansion in conjunction with improved mechanical properties achieved in Mg-Gd solid solutions by Cuihong Wang, Zhihua Dong, Bin Jiang, Lei Wang, Zhiying Zheng, Ang Zhang, Jiangfeng Song, Dingfei Zhang, Levente Vitos

Get full text

CALCULATION OF DYNAMICS OF TEMPERATURE CHANGING AT FILLING IN OF METALLIC MOLD by A. N. Chichko, L. V. Markov

“…The results of calculations of dynamics of the temperature field changing of the metallic mode used at production of casting ''rack'* are presented. The method of analysis of volumetric temperature field of metallic mode in time, which allows to analyze the dynamics of the chill heating under influence of casting melt by frequency curves of a number of grid elements, is offered.…”
Get full text

Temperature and Temperature Stress Design in the Sides of Moving Melts Passages by R. I. Esman

“…The analysis of heat and thermo-stressed state of plane channels with moving melts of liquid metals is carried out.The developed mathematical model and numerical experiment allow to determine the main control parameters of special types of casting for fabricating thin pieces by pressing, liquid stamping methods and low pressure die and regulated casting.…”
Get full text

Investigating the Effects of Formwork Material and Thickness on The Early Strength of Concrete. by Natukunda, Benjamin

“…The investigation involved material classification tests, fresh concrete tests (slump test) and hardened concrete tests (dry density and compressive strength) The investigation found that after the strength development of concrete cast in the steel form work was higher than the strength of concrete cast in the timber formwork. …”
Get full text

A Point Cloud-Based Feature Recognition and Path Planning Method by Changhong Chen, Shaofeng Wang, Shunzhou Huang

“…Based on the research background of in situ automatic ultrasonic phased array inspection of irregular porous castings, due to the limited in situ inspection stations, complex shape of irregular porous castings, and extreme multireflection structural features, it is necessary to identify the positioning inspection features among multiple features to be inspected and plan the optimal inspection path. …”
Get full text

Pseudomonas aeruginosa Septic Arthritis and Osteomyelitis after Closed Reduction and Percutaneous Pinning of a Supracondylar Humerus Fracture: A Case Report and Review of the Liter... by Adam M. Wegner, John C. Wuellner, Brian M. Haus

“…Although postoperative Pseudomonas infection is a feared complication associated with noncompliance and a wet cast, there are no reports in the literature of this occurring. …”
Get full text

Evaluation of Marginal Misfit of Metal Frameworks Welded by Gas-Torch, Laser, and Tungsten Inert Gas Methods by Wilson Matsumoto, Paula Pastana Beraldo, Rossana Pereira de Almeida, Ana Paula Macedo, Beatriz Roque Kubata, Takami Hirono Hotta

“…To evaluate the flexural resistance, one group was made casting the specimens in one piece. Other 3 groups using gas-torch, laser, and TIG welding techniques were made after sectioned transversally. …”
Get full text