-
241
Study on Safety Control of Large-Section Roadway with High Stress and Broken Surrounding Rock
Published 2021-01-01“…Through the modeling analysis of FLAC3D numerical software and the comparison of various support schemes, it is concluded that, after the combined support method of “anchor, net, and spray + grouting + full-section anchor cable + floor anchor cable“ is adopted, the convergence of roof and floor is reduced by 508 mm, and the convergence of two sides is reduced by 663 mm. …”
Get full text
Article -
242
A Study of Safety Coefficient Determination and Support Parameter Optimization Based on Vulnerability Preevaluation
Published 2021-01-01“…Applying more accurately calculated strength to the anchor-bolt structure can effectively avoid the issue of overcompensation, thus reducing the cost and increasing the driving speed. …”
Get full text
Article -
243
Surrounding Rock Stresses on a Working Face-End Roof under Mining Influence
Published 2021-01-01“…The surrounding rocks are in a stable state when the maximum stress of the surrounding rocks at the top corner of the reinforced anchor cable’s back-end is 26.1 MPa. The results show that cutting of the surrounding rocks at the top corner of the end and the reinforcement of the anchor cable can avoid the spalling and roof fall when the top corner of the end is affected by mining and can ensure that the end support advances and working face moves forward.…”
Get full text
Article -
244
Localization Algorithms in Large-Scale Underwater Acoustic Sensor Networks: A Quantitative Comparison
Published 2014-03-01“…The advantage of DV-hop and NLA is that the localization results do not rely on the number of anchor nodes; that is, only a small number of anchor nodes are needed for localization.…”
Get full text
Article -
245
Occurrence Mechanism of Roof-Fall Accidents in Large-Section Coal Seam Roadways and Related Support Design for Bayangaole Coal Mine, China
Published 2018-01-01“…On that basis, a new supporting design is proposed, including a more reasonable arrangement of anchor cables and bolts, bolts with full-length anchorage which are applicable in cracked and water-rich roadway, high-strength anchor cables, and crisscrossed steel bands. …”
Get full text
Article -
246
Failure Mechanism and Stability Control of Surrounding Rock of Docking Roadway under Multiple Dynamic Pressures in Extrathick Coal Seam
Published 2020-01-01“…The joint action of both is the mechanical mechanism that causes the plastic zone to expand in an asymmetric shape. (4) The coordinated control scheme of support (anchor bolt and anchor cable)—modified (grouting)—is adopted for the withdrawal roadway, and the coordinated control scheme of support (anchor bolt and anchor cable)—changing the cross-section shape of the roadway—is adopted for the docking roadway. …”
Get full text
Article -
247
Stability of Close Chambers Surrounding Rock in Deep and Comprehensive Control Technology
Published 2018-01-01“…Finally, the comprehensive control method was put forward with the water pump house as an example, that is, anchor, metal net, grouting, combined anchor cable and large-diameter anchor cable. …”
Get full text
Article -
248
PSO localization algorithm for WSN nodes based on modifying average hop distances
Published 2013-09-01“…Regarding the relatively big errors with running the DV-hop localization algorithm in a network topology scenario,with which nodes randomly distributes,a particle swarm optimization localization algorithm for WSN nodes based on modifying average hop distance was proposed.changing the structure of data packets sent by anchor nodes with broadcasting,weighting the average hop distance error of reference anchor nodes to modify the average hop distance,and using an improved particle swarm algorithm to optimize iteration process for localization,thus,WPDV-Hop localization algorithm improvements were carried out.The simulation results indicate that the localization accuracy and the stability of the WPDV-Hop localization algorithm are significantly improved compared with the original algorithm.…”
Get full text
Article -
249
An Improved 3D Localization Algorithm for the Wireless Sensor Network
Published 2015-06-01“…The concept of coplanarity is added into the traditional DV-Distance algorithm to reduce the positioning error caused by anchor nodes which are coplanar. Those unknown nodes which have been located are promoted to assistant anchor nodes to improve the positioning coverage. …”
Get full text
Article -
250
Research on the Reasonable Coal Pillar Width and Surrounding Rock Supporting Optimization of Gob-Side Entry under Inclined Seam Condition
Published 2021-01-01“…The results show that the influence range of inside stress field is about 12.2∼12.8 m based on theoretical calculation result; under the influence of 10 m coal column, the overall deformation of the roadway is relatively small and within the reasonable range of engineering construction, so the width of the coal pillar along the return air roadway is set to 10 m which is more reasonable; the cross-section characteristics of special-shaped roadway lead to asymmetric stress distribution and fragmentation of surrounding rock, and then the asymmetric surrounding rock control technology under the coupling effect of roof prestressed anchor + high-strength single anchor cable + truss anchor cable support is proposed. …”
Get full text
Article -
251
Displacement Monitoring during the Excavation and Support of Deep Foundation Pit in Complex Environment
Published 2021-01-01“…Taking a super large deep foundation pit project as an example, the horizontal displacement of crown beam and driveway, surface settlement, axial force of anchor cable, and underground water level in the construction process of the foundation pit are dynamically monitored and analyzed. …”
Get full text
Article -
252
Target Positioning with GDOP Assisted Nodes Selection Algorithm in Wireless Sensor Networks
Published 2014-06-01“…In wireless sensor networks (WSN), the geometric distribution of anchor nodes has a significant influence on the positioning accuracy. …”
Get full text
Article -
253
Blind-Tie Remplissage: Technique and Sequence
Published 2025-01-01“…Various surgical techniques, anchor configurations, and tying mechanisms can be used to accomplish the remplissage procedure. …”
Get full text
Article -
254
Range-Free Localization Scheme in Wireless Sensor Networks Based on Bilateration
Published 2013-01-01“…The proposed scheme uses only two anchor nodes and uses bilateration to estimate the coordinates of unknown nodes. …”
Get full text
Article -
255
Fracture Mechanics Models for Brittle Failure of Bottom Rails due to Uplift in Timber Frame Shear Walls
Published 2016-01-01“…In partially anchored timber frame shear walls, hold-down devices are not provided; hence the uplift forces are transferred by the fasteners of the sheathing-to-framing joints into the bottom rail and via anchor bolts from the bottom rail into the foundation. …”
Get full text
Article -
256
CEO CHARACTERISTICS AND FINANCIAL REPORTING QUALITY IN LISTED CONSUMER GOODS COMPANIES IN NIGERIA
Published 2024-04-01Get full text
Article -
257
Stability Analysis of Rock Slope with Multilayer Weak Interlayer
Published 2021-01-01“…The potential sliding surface of the slope is determined to be the lower weak interlayer, and the weak interlayer after the anchor cable reinforcement is carried out. Numerical analysis shows that the reasonable application of anchor cables significantly improves slope stability. …”
Get full text
Article -
258
Bolt Detection Signal Analysis Method Based on ICEEMD
Published 2018-01-01“…The ICEEMD is used in order to decompose the anchor detection signal according to the approximate entropy of each intrinsic mode function (IMF). …”
Get full text
Article -
259
Research on Lifetime Optimization Algorithm for Mobile Wireless Sensor Network
Published 2013-10-01“…When the position of sink node is fixed,the sensor nodes which are distributed around the sink node easily become hub nodes,forward a lot of data and fail prematurely.In order to solve this problem,the lifetime optimization algorithm for mobile wireless sensor network(LOAMWSN)was proposed.LOAMWSN algorithm considers the mobility of sink node,uses subtractive cluster algorithm to determine mobile anchor points of sink node,uses the nearest neighbor interpolation method to find the approximate solution of shortest route which traverse all mobile anchor points,uses distributed asynchronous Bellman-Ford algorithm to construct the shortest path tree in the k-hop range of sink node.Finally,sensor nodes transmit data to sink node along the shortest path tree.Simulation results show that in wireless sensor network of node uniform distribution and non-uniform distribution,LOAMWSN algorithm can prolong the network lifetime,balance the node energy consumption,and remain the average node energy consumption at a low level.Under certain conditions,it outperforms Ratio_w and TPGF algorithms.…”
Get full text
Article -
260
Application Study on Active Advanced Support Technology in Deep Roadway under Mine Goaf
Published 2020-01-01“…To solve the problems of the rapid advance of the working face was delayed by complicated working procedure and high labor intensity, and the severe damage of roof bolt (anchor cable) induced by advanced hydraulic support, the deformation characteristics of surrounding rock, and the supporting principle of grouting truss anchor cable were analyzed theoretically by taking the roadway of 3_(down) coal seams 2326# working face in Sanhekou coal mine as the research object; then, the mechanical model of supporting structure of roadway under goaf was established. …”
Get full text
Article