Microstructure Formation and Fracturing Characteristics of Grey Cast Iron Repaired Using Laser by Peng Yi, Pengyun Xu, Changfeng Fan, Guanghui Yang, Dan Liu, Yongjun Shi

“…A laser repairing protocol was developed using Fe-based alloy powders as material. The microstructure and fracturing feature of the repaired zone (RZ) were analyzed. …”
Get full text

Application of computational modeling to the kinetics of precipitation of aluminum nitride in steels by e Silva Costa A., Nakamura L., Rizzo F.

“…In this work, a computational tool for simulating multiparticle precipitation kinetics of diffusion-controlled processes in multi-component and multi-phase alloy systems is employed in an attempt to describe these precipitation processes. …”
Get full text

Combating Wear of ASTM A36 Steel by Surface Modification Using Thermally Sprayed Cermet Coatings by Vineet Shibe, Vikas Chawla

“…In the present study, alloy powder cermet coatings WC-12% Co and Cr3C2-25% NiCr have been deposited on ASTM A36 steel with D-Gun thermal spray technique. …”
Get full text

Monte Carlo Simulation of the Gamma-Ray Transmissions for the newly Designed Shielding Blocks used in Radiotherapy by Nuray Yavuzkanat, Hazal Burcu Saraç Kürem

“…For this reason, Cerrobend block (lipowitz alloy), which is made specifically for each patient, are commonly used in the hospitals. …”
Get full text

Morphology of Near- and Semispherical Melted Chips after the Grinding Processes Using Sol-Gel Abrasives Based on SEM-Imaging and Analysis by W. Kapłonek, K. Nadolny, W. Habrat

“…Observation of the spherical melted chips and acquisition of their images were carried out for grinding wheel active surfaces with microcrystalline sintered corundum abrasive grains SG™ after the internal cylindrical grinding process of a 100Cr6 steel and Titanium Grade 2® alloy by use of a scanning electron microscope, JEOL JSM-5500LV. …”
Get full text

Tensile strength of multi-material bolted double lap joints under static loading by Saoussane Bachi Bensaad, Mohamed Mazari, Otmane Lahlali

“…In this paper, the mechanical behavior of polymer and aluminum alloy bolted joints with double‐lap bolted structure under quasi‐static loading was studied numerically. …”
Get full text

Third Derivative Spectrophotometric Method for Simultaneous Determination of Copper and Nickel Using 6-(2-Naphthyl)-2, 3-dihydro-1,2,4- triazine-3-thione by Maliheh Barazandeh Tehrani, Effat Souri

“…The error of the determination method did not exceed 6.50%. Analysis of alloy sample showed that this method can be successfully used for simultaneous determination of Cu and Ni in real samples.…”
Get full text

Corrosion Performance of Cu-Based Coins in Artificial Sweat by J. Porcayo-Calderon, R. A. Rodríguez-Díaz, E. Porcayo-Palafox, L. Martinez-Gomez

“…Equivalent circuits confirmed that the corrosion performance of the Ni-Zn-Cu coins depends on the Zn/Ni ratio, such that decreasing this value decreases the corrosion resistance of the alloy. In general, nickel has a detrimental effect due to the formation of highly soluble Ni-based corrosion products.…”
Get full text

High-Temperature Creep Behavior of a Nickel-Based Single-Crystal Superalloy with Small-Angle Deviation from [111] Orientation by Guangyan Wang, Song Zhang, Guoqi Zhao, Ning Tian, Huajin Yan, Sugui Tian, Fangwei Jin

“…By means of tensile creep tests and microstructure analysis, the creep behavior and deformation mechanism of a nickel-based single-crystal alloy with small-angle deviations from the [111] orientation at 1040°C/137 MPa were investigated. …”
Get full text

Study on the Influence of Missile Cabin on Fragment Velocity under Explosive Detonation Impact by Xin Li, Weili Wang, Zhengfeng Liang, Jun Dong, Jiaojiao Tang

“…Then, the rationality of the theoretical formula is validated through the static explosion experiments of two prototype warheads, one with a titanium alloy cabin and the other without any cabin. It was found that after the warhead is equipped with the cabin, part of the energy is consumed to drive the cabin debris, resulting in a decrease in fragment velocity, but the velocity of cabin debris was greater than that of fragment of warheads without any cabin. …”
Get full text

Creep Rupture Behavior in Dissimilar Weldment between FB2 and 30Cr1Mo1V Heat-Resistant Steel by Jiankun Xiong, Jianping Yang, Haiyan Zhao, Lin Yang, Yang Guo, Fuheng Nie, Dexing Xu, Liping Yu, Fenghong Cao

Get full text

Electronic Controlling on Nanotribological Properties of a Textured Surface by Laser Processing by Haifeng Yang, Kun Liu, Yanqing Wang, Hao Liu, Jiaxiang Man, Bo Sun

“…This paper presented a simple, easily controlled method for fabricating regular nanotextures on an electrodeposited Ni-Co alloy. The electronic controlling on the friction performance of a nanotexured surface was investigated by AFM. …”
Get full text

Algorithm for optimization of cold‑rolled pipe rolling routes by S. V. Pilipenko

“…Depending on the grade of steel or alloy, some iteration operations can be excluded. …”
Get full text

Effect of a Rapid Tooling Technique in a 3D Printed Part for Developing an EDM Electrode by Turki Alamro, Mohammed Yunus, Rami Alfattani, Ibrahim A. Alnaser

“…The copper-coated FDM (CCF) and solid copper (SC) electrodes are used to conduct experiments on a die-sinking EDM machine using tool alloy steel as a workpiece. The CCF polymer electrode can be efficiently used in EDM operations as the build time of any complex shape was substantially reduced. …”
Get full text

REKAYASA DESAIN CIRCULAR HYBRID CRASH BOX UNTUK PENINGKATAN PERFORMA KELAYAKAN TABRAK by Delia Hani Wakhidah, Moch. Agus Choiron, Yudy Surya Irawan

“…This study aims to determine the energy absorption characteristics of two different configuration of hybrid material compositions using Aluminum Alloy 6063 and T300-epoxy Carbon Fiber composites. …”
Get full text

Numerical Simulation Study on Directional Solidification of DD5 Nickel-Based Single-Crystal Turbine Blades by Jianhui Wei, Min Lu, Libo Pi, Huan Zhao, Qian Lei

“…Two models with a wax module tree structure were employed for directional solidification simulation. An experimental alloy of a second-generation nickel-based single-crystal superalloy, DD5, was set for this investigation. …”
Get full text

Study on micro-structure, hardness and optimization of wear characteristics of Al6061/TiB2/CeO2 hot-rolled MMCs using Taguchi method by S. R. Sreenivasa Iyengar, D. Sethuramu, M. Ravikumar

“…. % of CeO2 particulates were reinforced in Al6061 alloy to manufacture hybrid Al MMCs by Vortex (Stircasting) technique. …”
Get full text

Enhancing microstructure and mechanical performance of aluminum copper friction stir lap welded joints with nickel powder interlayers by Rasoul Khajeh, Moosa Sajed, Akbar Heidarzadeh

“…This study investigates the effects of incorporating nickel (Ni) powder in the friction stir lap welding (FSLW) of Aluminum 1050 alloy and commercially pure copper sheets. Both single and multi-pass FSLW techniques were employed, and the mechanical properties and microstructures of the resulting joints were characterized. …”
Get full text

METODE PENINGKATAN KETAHANAN RETAK RESIN POLYESTER DENGAN PENAMBAHAN PROSENTASE VINYL ESTER by Nusyirwan Nusyirwan, Yul Hizhar, Adam Malik

“…This study aims to determine the energy absorption characteristics of two different configuration of hybrid material compositions using Aluminum Alloy 6063 and T300-epoxy Carbon Fiber composites. …”
Get full text

Development of Alumina-Titania Composite Layers on Stainless Steel through the Detonation Spray Method and Investigation of Salt Spray Corrosion Behavior along with Surface Examina... by A. Surya, R. Prakash, P. Senthil Kumar, G. Bharath Balji

“…Almost every metal and alloy corrodes when used in high-temperature applications. …”
Get full text