Preparation of polymeric aluminium ferric chloride from bauxite tailings by Ma D., Guo M., Zhang M.

“…The optimal synthesizing parameters for the preparation of PAFC obtained were as follows: the concentration of hydrochloric acid of 24 wt%, ratio of hydrochloric acid to bauxite tailings of 6:1, temperature of 90ºC, leaching time of 2.5 hours, ration of pickle liquor to calcium aluminate of 12:1, polymerization temperature of 90ºC and polymerization time of about 3 hours. …”
Get full text

Radiation balance and urban land use (case study: Kermanshah city) by taher Safarrad, mehran Mansourinia, hersh entezami

“…The results of this study showed that the selected land uses have significant differences in the amount of radiation flux, therefore the wastelands are warmer than the residential areas by about 6 oC and the residential areas are warmer than the green areas by about 1.5 oC. …”
Get full text

Improve Efficiency of Photovoltaic/Thermal Systems using Porous Materials: An Experimental Study by H. Farzan

“…The acquired results revealed that using steel wool reduces the PV temperature by 9.9 oC and increases the outlet temperature by 4.41 oC at the air flow rate of 0.17 kg/s. …”
Get full text

Advantages and Disadvantages of Partial High Pressure Homogenisation of Milk in Relation to Full-Stream Homogenisation by Katarzyna Ambroziak, Katarzyna Kiełczewska, Dorota Mickiewicz, Aneta Dąbrowska

“…This study determines the effect of full-stream and partial high pressure homogenisation (constant pressure of 100 MPa, different temperatures: 20 o C, 40 o C, 60 o C) on selected distinguishing features of the colloidal and emulsion phases of milk. …”
Get full text

DETERMINACIÓN DE LAS PROPIEDADES DE LA ENZIMA ALFA AMILASA PARA SU USO EN LA INDUSTRIA AZUCARERA by Saul Dueñas Casas, Jesús Luis Orozco, Héctor Luis Ramírez, Leissy Gómez Brizuela

“…Se determina que la α-amilasa es estable de 35 a 50 ºC y en un intervalo de pH de 5,0 a 8,5, con una actividad superior al 80 %. …”
Get full text

Some wood parameters in bulls administered vitamin c at different environmental temperatures by Tufan Keçeci, Ercan Keskin

“…At the same period, the blood samples were taken and the data of environmental temperatures were recorded In hot environmental temperatures (20,8 C; 39.3% relative humidity (RH) and 23.7C; 20.0% RH) serum glucose and total cholesterol levels of the bulls administered vitamin C or sterile physiological saline were determined to be lower levels, when compared to the same values in cold environmental temperatures (3,2ºC: 63.3% BH and 5.3ºC; 77% RH). Although aspartate aminotransferase (AST) activity ol the animals in both groups at hot environmental temperatures was found to be higher amounts than the value at cold environmental temperatures. …”
Get full text

Hot deformation behavior of micro-alloyed steel using processing maps developed with different constitutive equations by Thakur S.K., Das A.K., Jha B.K.

“…The hot workability of microalloyed steel was studied in the deformation temperature range of 850–1200ºC and strain rate of 0.001-100s-1. The constitutive relation of flow stress with temperature, strain rate and strain was established to construct processing maps of the microalloyed steel. …”
Get full text

A STUDY OF WINE FERMENTATION FROM MUCILAGE OF COCOA BEANS (Theobroma cacao L.) by Nguyễn Thị Thanh Tịnh, Nguyễn Tiến An, Hồ Thị Thu Hòa, Nguyễn Thị Tươi

“…The product of fermentation was assessed in terms of ethanol concentration, and optimum primary fermentation conditions were at the temperature of 28oC with the duration of 7 days. Secondary fermentation, which helped in stabilizing the quality of wine, occurred at 18oC for 30 days. …”
Get full text

Performance Evaluation of Produced Water Quality from a Nearshore Oil Treatment Facility by DBM Nwokoma, KK Dagde

“…The average temperature of the produced water was reduced from 42.0oC to 25.9oC. The average pH of the samples, which was mostly alkaline prior to treatment, improved from 6.3 to 6.7. …”
Get full text

Formation mechanism of Fe-Mo master alloy by aluminothermic reduction of MoS2-Fe2O3 in the presence of lime by Golmakani M.H., Khaki Vahdati J., Babakhani A.

“…In this study, the activation energy was determined about 106.4 (kJ.mol-1) for thermite reaction in the temperature range of 810 to 918ºC.…”
Get full text

Leaching of a Cu-Co ore from Congo using sulphuric acidhydrogen peroxide leachants by Seo S.Y., Choi W.S., Kim M.J., Tran T.

“…Recoveries of ~90% of Co could be achieved at 20ºC, using leachants consisting of 0.36M sulphuric acid and 0.025M hydrogen peroxide after 3 hours. …”
Get full text

Response surface methodological approach for optimizing the enzyme activity and enzymatically mediated bioprecipitation of heavy metals by alkaline phosphatase by Virendra Vaishnav, Tanushree Chatterjee, Manisha Agrawal

“…Variables were concentration of substrate ((p-NPP 14 to 17 mM), pH 8 to 10.5, and temperature (35 to 45oC). Statistical analysis of variance (ANOVA) was performed to classify the competence of the developed model and revealed a good understanding between the experimental data and the proposed model. …”
Get full text

Performance Evaluation of Produced Water Quality from a Nearshore Oil Treatment Facility by DBM Nwokoma, KK Dagde

“…The average temperature of the produced water was reduced from 42.0oC to 25.9oC. The average pH of the samples, which was mostly alkaline prior to treatment, improved from 6.3 to 6.7. …”
Get full text

Effects of CaO, Al2O3 and MgO on liquidus temperatures of copper smelting and converting slags under controlled oxygen partial pressures by Zhao B., Hayes P., Jak E.

“…The effects of CaO, Al2O3 and MgO on the phase equilibria of this slag system have been experimentally investigated in the temperature range 1200 to 1300 oC and oxygen partial pressures between 10-5 and 10-9 atm. …”
Get full text

Reduction of Fe and Ni in Fe-Ni-O systems by Zhang Y., Wei W., Yang X., Wei F.

“…Recoveries of ~90% of Co could be achieved at 20ºC, using leachants consisting of 0.36M sulphuric acid and 0.025M hydrogen peroxide after 3 hours. …”
Get full text

Structural and Electrical Conductivity Properties of a Newly Synthesized 3-Methoxybenzylammonium Cation Diphosphate by A. Elboulali, S. Akriche, M. Rzaigui, S. S. Al-Deyab

“…The structure of the newly synthesized material, [3-(CH3O)C6H4CH2NH3]2H2P2O7 can be described as inorganic layers (H2P2O72-)n stacked perpendicular to the c-axis at z = 0 and z = 1/2 interleaved with organic cations [3-(CH3O)C6H4CH2NH3]+. …”
Get full text

La borrasca Filomena: características y estimación de daños en el arbolado de Madrid mediante imágenes de satélite by María Eugenia Pérez González, José María García Alvarado, María del Pilar García Rodríguez

“…Esta nevada histórica se extendió en enero de 2021 sobre la mitad de la superficie de la Península Ibérica, aunque sus consecuencias se agravaron ante la persistencia de la situación anticiclónica posterior, que mantuvo temperaturas superficiales en Madrid entre -13 ºC y -2,5 ºC. El impacto en el arbolado, medido a través de imágenes de cambios en el NDVI, ha afectado al 11 % de la cobertura vegetal invernal del municipio, con daños muy notables en Pinus pinea, P. halepensis y Quercus Ilex, tanto del viario urbano, como de los múltiples parques, jardines y espacios forestales de la ciudad. …”
Get full text

Production of mortar with calcined alum sludge as partial cement replacement by Wong Ai Wei, Chew Hoong Yuin, Bashir Mohammed J. K., Aldahdooh Majed A. A., Ng Choon Aun

“…Mortars with alum sludge calcined at 800 ºC had the highest strength as compared to the other temperatures. …”
Get full text

Emulsion-Type Chicken Sausage Quality with Fat Substitution by Rice Starches during Freeze-Thaw Cycles by A. Kosim, P. Rumpagaporn, K. Vangnai

“…Sausages were stored at -18 oC for seven days and thawed at 4 oC for 17 h for each of three F-T cycles, then thawing loss and texture were evaluated. …”
Get full text

Electrochemical synthesis and characterization of BaB6 from molten melt by Jose T.P., Sundar L., Berchmans L.J., Visuvasam A., Angappan S.

“…The electrolysis was performed at 870ºC under argon atmosphere, at current densities ranging from 0.2-0.5 A/cm2. …”
Get full text