-
1101
An Accelerated Test Method of Simultaneous Carbonation and Chloride Ion Ingress: Durability of Silica Fume Concrete in Severe Environments
Published 2016-01-01“…Moreover, the porosity analysis of the specimens showed that the sample containing silica fume cured in the tidal zone had 50.1% less total porosity than the plain cement paste cured in the same condition.…”
Get full text
Article -
1102
Strength Properties of High-Strength Concrete Containing Coal Bottom Ash as a Replacement of Aggregates
Published 2020-01-01“…Therefore, the effects of replacing fine aggregates with CBA and variations in the curing age on the strength properties of HSC with a compressive strength of greater than 60 MPa were investigated in this study. …”
Get full text
Article -
1103
Prediction of Unconfined Compression Strength for Saline-Alkaline Soils Mixed with Cement and Wheat Straw
Published 2020-01-01“…In addition, based on the results from unconfined compression tests, a formula for predicting the unconfined compression strength of specimens related to cement content, wheat straw content, curing periods, etc., was determined, and comparing with the results from unconfined compression tests, it had higher precision in predicting the unconfined compression strength of specimens.…”
Get full text
Article -
1104
Longer-Term Postcure Measurement of Cuspal Deformation Induced by Dimensional Changes in Dental Materials
Published 2015-01-01“…The presented technique can be reliably used to quantify stress development of curing materials under clinically relevant (oral) conditions. …”
Get full text
Article -
1105
Slurry and Technology Optimization for Grouting Fissures in Earthen Sites with Quicklime
Published 2019-01-01“…The selected slurry and curing age were then applied to testing traditional grouting technology and optimized grouting technology (i.e., microlime piles in the fissure) in fissure grouting field experiments. …”
Get full text
Article -
1106
Basal Cell Carcinoma of the Penis: A Case Report and Review of the Literature
Published 2014-01-01“…Here we report a case of penile basal cell carcinoma cured with wide local excision.…”
Get full text
Article -
1107
Analysis of Uniaxial Compression Mechanical Properties of Rubber Powder Recycled Coarse Aggregate Concrete Based on Strain Energy Theory
Published 2022-01-01“…In order to develop and make full use of waste construction concrete and waste tyre rubber powder, the experiment entirely used recycled coarse aggregate to replace natural crushed stone aggregate and investigated the effect of different mesh sizes of rubber powder (20 mesh, 60 mesh, and 100 mesh) on the uniaxial compressive mechanical properties, strain energy density, and pore structure of recycled coarse aggregate concrete at three curing ages (14 d, 28 d, and 90 d). Based on the strain energy theory, fractal theory, and grey correlation theory, the effects of the fractal dimension of the pore size of the rubber powder recycled concrete on the correlation of the strain energy parameters were investigated at different curing ages. …”
Get full text
Article -
1108
One-part alkali-activated mortars based on clay brick waste, natural pozzolan waste, and marble powder waste
Published 2024-12-01“…The increase in properties with the curing period was especially high in the first 28 days.…”
Get full text
Article -
1109
Early and long-term performance evaluation of low NaOH concentrated waste HBP-GGBS based alkali activated composites
Published 2025-03-01“…This study determined the importance of curing time in optimizing the mechanical and durability properties of waste HBP-GGBS based AACs. …”
Get full text
Article -
1110
Effects of Lamellar Keratectomy and Intrastromal Injection of 0.2% Fluconazole on Fungal Keratitis
Published 2015-01-01“…In cured eyes, uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA) were both 20/250–20/20. …”
Get full text
Article -
1111
Experimental Study on the Effect of Water on the Properties of Cast In Situ Foamed Concrete
Published 2018-01-01“…Firstly, the shrinkage deformation with the curing time and the volumetric moisture content is studied by the drying shrinkage test and improved drying shrinkage test. …”
Get full text
Article -
1112
Mechanical and Microstructural Properties of Bamboo Fiber-Reinforced Concrete Containing a Blend of Waste Marble Powder and Waste Glass Powder
Published 2023-01-01“…The mechanical tests were conducted after samples were cured for 7 and 28 days in water. The microstructural properties of the hardened concrete from three different mixes were also determined for the 28-day cured specimens. …”
Get full text
Article -
1113
Effect of Recycled Concrete Aggregates on Plain Concrete Compressive Strength and its Environmental Sensitivity.
Published 2025“…The test samples were crushed to determine their compressive strength values after 7, 14, and 28 days of curing. Other test samples were exposed to environmental factors after 28 days of curing for instance elevated temperature (1 hour, @105 ℃ ), humidity, and rainwater for 14 days and compressed to note the change in compressive strength of natural concrete and recycled concrete and results showed that recycled concrete is more affected by environment factors than natural concrete made with virgin aggregates. …”
Get full text
Thesis -
1114
Rapid pickling method of salted duck egg using alternating hot and cool conditions and ultrasonic treatment
Published 2024-12-01“…Salted duck egg (SDE) is a traditional Chinese food. The traditional curing method needs a long period. To shorten the pickling process, ultrasonic power, ultrasonic time, and ultrasonic alternating temperature were employed as the single factor to produce SDE. …”
Get full text
Article -
1115
Temperature Field Variation Law of Low Exothermic Polymer Grouting Material in Repairing Void Damage of Frozen Soil Subgrade
Published 2021-01-01“…Finally, the upper boundary of the influence of the heat energy released by the curing reaction on the frozen soil subgrade temperature field was determined to be 30 cm, and the lower boundary was 20 cm.…”
Get full text
Article -
1116
Improvement of Physical and Mechanical properties of High-performance Sand Concrete with different Silica Fume content
Published 2024-01-01“…The compressive and flexural strengths were performed on the HPSC samples with two standardised sizes of 40 mm × 40 mm × 40 mm and 40 × 40 × 160 mm, which cured during 3, 7, and 28 d. In contrast, both water absorption and water capillary absorption analyses were conducted under a prismatic size of 40 × 40 × 160 mm and cured for 28 d. …”
Get full text
Article -
1117
Research on Wetting-Drying Cycles’ Effect on the Physical and Mechanical Properties of Expansive Soil Improved by OTAC-KCl
Published 2015-01-01“…Firstly, a reasonable combination of ameliorant 0.3% STAC and 3% KCl is chosen referring to the free swell test. Then, the best curing period, 14 days, is gotten from UCS tests. …”
Get full text
Article -
1118
Impact of manufacturing variables on the mechanical performance of recycled glass-enhanced composites
Published 2025-03-01“…This study investigated the influence of various manufacturing conditions – including moulding pressure, post-curing, and aging – on the microstructure and mechanical properties (flexural and tensile) of epoxy matrix composites incorporating recovered glass particles at weight fractions ranging from 84 wt% to 90 wt%. …”
Get full text
Article -
1119
Experimental Study and Application of LASC Foamed Concrete to Create Airtight Walls in Coal Mines
Published 2020-01-01“…The performance of filling materials that were prepared by adding various dosages of foam to LASC was studied. The longer the curing period for the foam filling material of LASC, the better the crystallinity of the hydrated product. …”
Get full text
Article -
1120
Indirect Restorations and Fixed Prosthodontics: Materials and Techniques Used by General Dentists of New Zealand
Published 2019-01-01“…The majority of the respondents (68.8%) reported using resin composite light-cured materials for the core buildup of vital posterior teeth. …”
Get full text
Article