-
1521
A Design of Fractal Hilbert MIMO Antenna for 5G Mobile
Published 2022-03-01“…The proposed fractal Habrit curve MIMO antennas were fabricated for the 3800 - 5460 MHz and 3735-5390 MHz bands with a 49 dB and 40 dB return loss and high isolation of 19.67 dB and 18.5 dB, using FR4 with dimensions of (24 × 45 × 0.8mm3) and (24 × 45 × 1mm3) respectively. …”
Get full text
Article -
1522
Enhancing Stability of Thin-Walled Short Steel Channel Using CFRP under Eccentric Compression
Published 2016-01-01“…Seven specimens, each 750 mm long, were fabricated; the main parameters were the number of CFRP plies (one or two) and the space between the CFRP strips (50, 100, or 150 mm). …”
Get full text
Article -
1523
Disain Mesin Pengaduk Pakan Puyuh Yang Dilengkapi Dengan Komponen Penyemprot Cairan Fermentasi
Published 2022-04-01“…Poultry feed mixing machine was designed, fabricated and tested. The machine consists of two function as mixing and fermented liquid spray. …”
Get full text
Article -
1524
Tailored topotactic chemistry unlocks heterostructures of magnetic intercalation compounds
Published 2025-01-01“…Abstract The construction of thin film heterostructures has been a widely successful archetype for fabricating materials with emergent physical properties. …”
Get full text
Article -
1525
Improved Efficiency of Flexible Organic Light-Emitting Diodes by Insertion of Ultrathin SiO2 Buffer Layers
Published 2013-01-01“…An ultrathin hole-injection buffer layer (HBL) using silicon dioxide (SiO2) by electron beam evaporation in flexible organic light-emitting diode (FOLED) has been fabricated. While the current of the device at constant driving voltage decreases as increasing SiO2 thickness. …”
Get full text
Article -
1526
Investigation of Contact Properties and Device Performance for Bifacial Double-Side Textured Silicon Solar Cells With Polysilicon Based Passivating Contacts
Published 2025-01-01“…Solar cells with n-type polysilicon based passivating contacts on the rear side are fabricated and characterized. The scientific approach used, and the insights presented in this work, help to understand the mechanisms and behavior of screen-printed and fired-through contacts to polysilicon layers deposited onto textured silicon surfaces. …”
Get full text
Article -
1527
Experimental Study on Structural Performance of RC Exterior Beam-Column Joints Retrofitted by Steel Jacketing and Haunch Element under Cyclic Loading Simulating Earthquake Excitati...
Published 2017-01-01“…Four half-scale RC exterior beam-column joints were fabricated and tested under cyclic loading simulating earthquake excitation. …”
Get full text
Article -
1528
A Printed LPDA Antenna Fed by a Microstrip Line to Double Sided Parallel Strip Line from Backside
Published 2017-01-01“…To validate this approach, a printed LPDA antenna is simulated and fabricated for operating in the S and C bands (2.5–6 GHz). …”
Get full text
Article -
1529
Dual-Mode Circular Polarization Selective Surface Cell for Single-Layer Dual-Band Circularly Polarized Reflectarray
Published 2019-01-01“…A single-layer dual-band reflectarray operating with orthogonal CPs has been fabricated and tested. Measured results show the peak gains of 25.2 dBi at 11.6 GHz with 31% 3 dB axial ratio (AR) bandwidth and 26.5 dBi at 14.6 GHz with 32% 3 dB AR bandwidth, respectively. …”
Get full text
Article -
1530
Oxygen effect on the performance of β-Ga2O3 enhancement mode MOSFETs heteroepitaxially grown on a sapphire
Published 2025-03-01“…Enhancement-mode β-Ga2O3 metal-oxide-semiconductor field-effect transistors (MOSFETs) were then fabricated with a gate-recessed process, incorporating a 5 µm gate field plate structure. …”
Get full text
Article -
1531
A Miniaturized 4 : 1 Unequal Wilkinson Power Divider Using Artificial Transmission Lines and Double-Sided Parallel-Strip Lines
Published 2017-01-01“…Microstrip line with very high characteristic impedance of over 150 Ω has been achieved by this method, which cannot be easily achieved by conventional transmission lines because of comparably thin conductor width. The fabricated 4 : 1 unequal power divider has good operational performance and occupies 55.3 mm×37.8 mm, which is only about 40% of area compared to a conventional one at 0.9 GHz.…”
Get full text
Article -
1532
Investigation on Microstructure and Tensile Fractography of RE Oxides (CeO2/Y2O3) Reinforced AZ91D Magnesium Matrix Composites
Published 2022-12-01“…Stir casting route was adopted to fabricate sample for study. Microstructure analysis illustrated the uniform distribution of particulate in matrix alloys. …”
Get full text
Article -
1533
Densely vascularized thick 3D tissue shows enhanced protein secretion constructed with intermittent positive pressure
Published 2025-02-01“…This approach demonstrates promise for fabricating functional, transplantable, and thick tissues with dense vascularization and a high capacity for protein secretion, paving the way for novel applications in regenerative medicine.…”
Get full text
Article -
1534
Effects of the FR 4 Substrate Realized in a Circularly Polarized UHF-RFID Reader Antenna with Fractal Geometry for Enhancing Parameters
Published 2021-01-01“…The designed antenna is fabricated, and the prototype is characterized in terms of dielectric constant and loss tangent. …”
Get full text
Article -
1535
A Review on Melt-Pool Characteristics in Laser Welding of Metals
Published 2018-01-01“…Recent advances in metal additive manufacturing processes have renewed interest in the melt-pool studies because in many of these processes, part fabrication involves small moving melt-pools. The present work is a critical review of the literature on experimental and modeling studies on laser welding, with the focus being on the influence of process parameters on geometry, thermodynamics, fluid dynamics, microstructure, and porosity characteristics of the melt-pool. …”
Get full text
Article -
1536
Investigation on Mechanical Behaviour of LM6 Aluminum Alloy Hybrid Composites Processed Using Stir Casting Process
Published 2022-01-01“…This hybrid composite was fabricated by varying fly ash from 3% to 15% with an increase of 3%. …”
Get full text
Article -
1537
A Novel Stick-Slip Type Rotary Piezoelectric Actuator
Published 2020-01-01“…The actuator is proposed, fabricated, and tested with the aim of realizing both fine resolution and a long stroke. …”
Get full text
Article -
1538
Dual-Band Circularly-Polarized Transparent GNSS Antenna for Vehicular Applications
Published 2025-01-01“…The proposed design is fabricated and measured to validate the design concepts.…”
Get full text
Article -
1539
Investigation of Elastic Energy on Single Crystal GaN Nanobeams with Different Span
Published 2014-01-01“…This research presents a novel technique which can more efficiently fabricate different spans of nanobeams on the same substrate. …”
Get full text
Article -
1540
A Wideband Hybrid Fractal Ring Antenna for WLAN Applications
Published 2022-01-01“…The prototype has been fabricated and experimentally verified.…”
Get full text
Article