Effect of SiC Addition on Microhardness and Relative Density during Selective Laser Melting of 316L Stainless Steel by Raid Mohammed Hadi, Ziad Aeyad Taha

“…The present work adopts the selective laser melting (SLM) technique to fabricate SiC-reinforced 316L steel to boost its microhardness and strength properties. …”
Get full text

Rupture Directivity of Moderate Earthquakes Along the Main Marmara Fault Suggests Larger Ground Motion Towards Istanbul by Xiang Chen, Patricia Martínez‐Garzón, Grzegorz Kwiatek, Yehuda Ben‐Zion, Marco Bohnhoff, Fabrice Cotton

Get full text

All-Textile Compact Ultra-Wideband Microstrip Antenna with Full Ground Plane for WBAN Applications by Jinxin Du, Ruimeng Wang, Haiyan Li, Xue-Xia Yang, Christophe Roblin

“…The antenna incorporates flexible materials such as felt and conductive fabrics which provide optimal wearing comfort and durability. …”
Get full text

Effect of Roasting on the Proximate Composition, Antioxidant Activity, and Functional Properties of Afrostyrax lepidophyllus (Country Onion) Seeds by Wiyeh Claudette Bakisu Muala, Tonfack Djikeng Fabrice, Noumo Ngangmou Thierry, Ngangoum Eric Serge

Get full text

A Self-Checking Hardware Journal for a Fault-Tolerant Processor Architecture by Mohsin Amin, Abbas Ramazani, Fabrice Monteiro, Camille Diou, Abbas Dandache

Get full text

EFFECT VARIATION OF TEMPERATURE AND STIRRING SPEED ON THE BENDING TEST OF FIBERGLASS FIBER COMPOSITE MATERIALS USING THE VACUUM ASSISTED RESIN INFUSION (VARI) METHOD by Ferry Setiawan, Faras Bimo Sakti, Dhimas Wicaksono

“…This study aims to investigate the effect of temperature with constant agitation at 164 rpm on the fabrication of composite materials using the Vacuum Assisted Resin Infusion (VARI) method. …”
Get full text

High-performance triboelectric nanogenerators based on Ag-doped ZnO loaded electrospun PVDF nanofiber mats for energy harvesting and healthcare monitoring by Hema Malini Venkatesan, Anand Prabu Arun

“…The electrospun ZnO and Ag-ZnO loaded PVDF nanofiber mats (NFMs) served as tribo-negative layer, while thermoplastic polyurethane (TPU) served as tribo-positive layer in the TENG device fabrication. The electrical measurement results revealed that pristine PVDF/TPU-based TENG device exhibited lower performance (V oc = 9.0 V and I sc = 0.6 µA) compared to the optimized PAZ3/TPU-based TENG (V oc = 51 V and I sc = 1.2 µA), and utilized for concurrent applications such as powering over 10 light-emitting diodes, energy harvesting and healthcare monitoring applications. …”
Get full text

Effect of Various Preparation Designs on Pull-Out Bond Strength of Endocrown by Naveen Thangarasu, K. Vijay Venkatesh

“…The group C consists of preparation with a 50-60 degree outward slope. Endocrowns were fabricated using CAD/CAM lithium disilicate glass-ceramics. …”
Get full text

Investigation of thermal conductivity of Prosopis juliflora / Acacia leucophloea / Acacia nilotica fibers / ceramic fillers / epoxy composites by Cholapancheri Krishnaswamy Hemalatha, Gopalan Venkatachalam, Mohan Bhuvaneshwari

“…The novelty of this study lies in influencing the underutilised biobased fibres like Acacia leucophloea (AL), Prosopis juliflora (PJ) and Acacia nilotica (AN) with varying fibre quantities, and ceramic filler hexagonal Boron Nitride (h-BN), Aluminium Oxide (Al2O3) and Silicon Carbide (SiC) to estimate the thermal conductivity of epoxy composites. Samples are fabricated by the Hand layup method varying the fiber quantity and different fillers at 1 wt.%. …”
Get full text

Highly Efficient Dual-Band Rectifier Based on Symmetric Impedance Control Network by Eojin Kim, Yeonsoo Kim, Juntaek Oh

“…The proposed rectifier is designed and fabricated with a compact size of <inline-formula> <tex-math notation="LaTeX">$28.9\times 38.9$ </tex-math></inline-formula> mm2. …”
Get full text

Aluminum and Inorganic Natural Pigment Colored Composites by Powder Metallurgy Forming by Miguel Angel Martínez, Juana Abenojar

“…The composites are fabricated with different pigments (10 wt%), formed through uniaxial compaction at 500 MPa, and sintered in a nitrogen atmosphere at 610 °C for 30 min. …”
Get full text

Identification of novel genes responsible for a pollen killer present in local natural populations of Arabidopsis thaliana. by Anthony Ricou, Matthieu Simon, Rémi Duflos, Marianne Azzopardi, Fabrice Roux, Françoise Budar, Christine Camilleri

Get full text

Investigation of Mechanical, Tribological, and Electrical Properties of Silk Reinforced Polymeric Composite by Chikesh Ranjan, Gautam Sarkhel, Kaushik Kumar

“…The processing and fabrication of SFRCs have been carried out using the traditional hand layup technique using untreated silk fibres (SFs) and silk cloths (SCs) in the form of single, double, and triple layers of SFs and SCs laminates oriented in uniaxial and biaxial directions. …”
Get full text

An Incremental Kernel Density Estimator for Data Stream Computation by Yulin He, Jie Jiang, Dexin Dai, Klohoun Fabrice

Get full text

Impact of Admixtures on Segregation in Self-compacting concrete: A Comparative Study Between Standardized and Ultrasonic Pulse Velocity (UPV) Methods by Moulaï Abdellah Bouabdallah, Mohamed Mouli, Mohammed Benmammar

“…To do so, column-type molds of different sizes were fabricated. The first was designed in accordance with the recommendations of standard V1, while the others, of different dimensions, were made according to standards V2 and V3. …”
Get full text

Real-Time Implementation of a Novel Design Approach for Sub-GHz Long-Range Antenna for Smart Internet of Things Communication by Sneha Bhardwaj, Praveen Kumar Malik, Anish Gupta, Rajesh Singh

“…To verify the proposed design, an antenna was fabricated and measured, which covers the LoRa frequency band at 868 MHz, providing a sufficient bandwidth of 10 MHz and a gain of more than 0.5 dB in the operating band. …”
Get full text

Design of a Mechanized Road Sweeper by Asiimwe Dianah

“…The researcher, however, recommended that the fabrication of the machine needs to be done based on the individual part parameters developed in this thesis and performance testing of the machine to embrace the new technology for effective sweeping process.…”
Get full text

Effect of pouring temperature on microstructure and durability of DD419 single crystal superalloy by ZHANG Hui, DING Qiang, LIU Jide

“…The creep rupture properties of DD419 single crystal superalloys，fabricated at varying pouring temperatures were examined under conditions of 850 ℃/650 MPa，1050 ℃/190 MPa and 1100 ℃/130 MPa. …”
Get full text

Do the Various Indirect Bonding Techniques Provide the Same Accuracy for Orthodontic Bracket Placement? (Randomized Clinical Trial) by Ammar Sh. Al-Ubaydi, Dheaa Al-Groosh

“…At the same time, the bracket positioning of 10 patients was done digitally by the 3D Maestro® software and the remaining 10 patients manually through the Ray Set® device. IBT were fabricated by CAD/CAM system, 3D printer, and vacuum-formed thermoplastic machine. …”
Get full text

Microstructure and Tensile Property Tailoring of Al–5Mg (wt%) Alloy Combined with Continuous Rheo-Extrusion and Sc Modification by Bowei Yang, Wenyue Liu, Xin Liu, Dalong Yang, Minqiang Gao

“…In this work, Al–Mg alloys fabricated by combining continuous rheo-extrusion (CRE) and Sc modification were proposed for producing Al–Mg alloys with high efficiency and superior mechanical performance. …”
Get full text