Study on the mechanical properties of Ti-6Al-4V alloy with minimal surface structures: effects of different heat treatment temperatures by Kai Qian, Shuangyu Liu, Fulong Zhang, Guihua Hang, Bo Cui, Ziwei Guo, Qiushi Zhang, Wang Binhua

“…This study utilized selective laser melting (SLM) to fabricate TPMS scaffold models with porosities of 50%, 60%, 70%, and 80%, based on Gyroid and Primitive unit cells. …”
Get full text

Research on the optimization of mechanical properties of triply periodic minimal surfaces in composite materials prepared with the assistance of acoustic fields by Shuai Guo, Xianliang Sheng, Anfu Guo, Wenlu Yang, Xiaolin Zhao, Shang Sui, Jiaqiang Li, Yufan Zhao, Meng Wang, Xin Lin

“…This paper proposes an optimized Gyroid Sin Square (GSS) gradient structure and fabricates composite materials and epoxy interpenetrating phase composites (IPCs) lattice structures using Laser Powder Bed Fusion (LPBF) combined with Acoustic Fields (AF). …”
Get full text

Compact MIMO Microstrip Antennas for USB Dongle Operating in 2.5–2.7 GHz Frequency Band by Vladimir Ssorin, Alexey Artemenko, Alexander Maltsev, Alexey Sevastyanov, Roman Maslennikov

“…Experimental measurements of the fabricated antenna systems proved the characteristics obtained from electromagnetic simulation.…”
Get full text

Photocatalytic upcycling of polylactic acid to alanine by sulfur vacancy-rich cadmium sulfide by Yue Wu, Phuc T. T. Nguyen, Sie Shing Wong, Minjun Feng, Peijie Han, Bingqing Yao, Qian He, Tze Chien Sum, Tianyong Zhang, Ning Yan

“…This work not only highlights a facile approach for fabricating defect-engineered catalysts but also presents a sustainable method for upcycling plastic waste into valuable chemicals.…”
Get full text

All‐Inorganic Perovskite Quantum‐Dot Optical Neuromorphic Synapses for Near‐Sensor Colored Image Recognition by Yung‐Chi Yao, Chia‐Jung Lee, Yong‐Jun Chen, Jun‐Zhi Feng, Hongseok Oh, Chin‐Shan Lue, Jinn‐Kong Sheu, Ya‐Ju Lee

“…The dual functionality of each unit within the ONS device, which can be operated as either an optical sensor or a synaptic device depending on applied electrical polarity, provides significant advantages over previous heterogeneous integration methods, particularly regarding material selection, structural compatibility, and device fabrication complexity. The ONS device exhibits distinct wavelength responses essential for emulating colored image recognition capability inherent in the human visual system. …”
Get full text

Custom-Made Computer-Aided-Design/Computer-Aided-Manufacturing Biphasic Calcium-Phosphate Scaffold for Augmentation of an Atrophic Mandibular Anterior Ridge by Francesco Guido Mangano, Piero Antonio Zecca, Ric van Noort, Samvel Apresyan, Giovanna Iezzi, Adriano Piattelli, Aldo Macchi, Carlo Mangano

“…This study demonstrates that custom-made scaffolds can be fabricated by combining CT scans and CAD/CAM techniques. …”
Get full text

Effect of different restorative design on stress concentration of lithium disilicate and monolithic zirconia endocrown on a mandibular molar - a finite element analysis by Garima Karn, Manoj Shetty, Chethan Hegde

“…Conclusion There is a positive influence of margin design selection within the same material used for the fabrication of endocrown.…”
Get full text

High performance memristor device from solution processed MnO2 nanowires: Tuning of resistive switching from analog to digital and underlying mechanism by Rajkumar Mandal, Arka Mandal, Nayan Pandit, Rajib Nath, Biswanath Mukherjee

“…This study reports the synthesis of manganese dioxide (MnO2) nanowires via the hydrothermal method and the fabrication of high-performance memristor devices using solution-processed MnO2 nanowires. …”
Get full text

Additively manufactured biodegradable Zn metamaterials with tunable Poisson’s ratio and enhanced mechanical properties by Yixuan Shi, Jiaqi Gao, Xuan Li, Zui Tao, Chengcong Huang, Shangyan Zhao, Yuzhi Wu, Youwen Yang, Yabin Yang, Yageng Li, Lu-Ning Wang

“…Using laser powder bed fusion (LPBF), we fabricated these Zn metamaterials and assessed their mechanical properties through simulations and compression tests. …”
Get full text

Quantification and identification of microfibers released from textiles during simulated accelerated washing by João Pinto da Costa, Ana Costa, Andréa Marinho, Alcina Pimenta, Ana Paula Fonte, Ana L. Patrício Silva, António José Fernandes, Florinda M. Costa, Damià Barceló, Lúcia H.M.L.M. Santos, Armando Duarte, Teresa Rocha-Santos

“…As such, in this work, fibers from different fabrics were subjected to a simulated accelerated washing process to determine the release of microfibers into the resulting water following established and defined international standards. …”
Get full text

A VERY LOW BANDGAP LINE-TUNNEL FIELD EFFECT TRANSISTOR WITH CHANNEL-BURIED OXIDE AND LATERALLY DOPED POCKET by Huu Thai Bui, Chun-Hsing Shih, Dang Chien Nguyen

“…The on-current is optimized using a heavy, thin pocket, for which the band bending is maximized and the effective gate-insulator thickness is minimized. For the fabrication feasibility using existing doping techniques, the pocket concentration and thickness should be 1019 cm-3 and 4 nm, respectively, to maximize the on-current of the InAs line-TFET. …”
Get full text

Effects of ultrasonic rotating extrusion assisted wire arc additive manufacturing on the microstructure and mechanical properties of 5356 aluminum alloy by Rongtao Zhu, Liang Zhang, Longhan Duan, Zhaofeng Liang, Chuang Li, Bo Yuan, Peng Du, Zhiwen Xie, Yaping Zhang

“…Wire Arc Additive Manufacturing (WAAM) for the fabrication of lightweight Al alloy represents a burgeoning area of research. …”
Get full text

Enhanced stability and oxidation resistance of Acer truncatum Bunge seed oil Pickering emulsion using rice bran protein modified by phytic acid by Jianjun Huang, Ruyi Sha, Jing Dai, Zhenzhen Wang, Min Cai, Xianxiu Li, Jianwei Mao

“…In this study, rice bran protein (RBP) was employed as an emulsifier for the fabrication of Acer truncatum Bunge seed oil Pickering emulsion. …”
Get full text

3D printed biodegradable hydrogel-based multichannel nerve conduits mimicking peripheral nerve fascicules by Woo-Youl Maeng, Yerim Lee, Szu-Han Chen, Kyung Su Kim, Daeun Sung, Wan-Ling Tseng, Gyu-Nam Kim, Young-Hag Koh, Yuan-Yu Hsueh, Jahyun Koo

“…Hydrogel-based NGCs with microscale multichannels resembling actual nerve fascicles are fabricated using digital light processing as 3D printing. …”
Get full text

Nasal Rehabilitation in a Patient After Basal Cell Carcinoma and Radiotherapy: A Case Report by Tamana Barakati, Hedayatullah Ehsan, Omid Humkar, Hassina Shadab, Munir Ahmad Ibrahimkhil

“…The process involved careful surgical removal of residual tissue, followed by detailed impression‐taking, modeling, and fabrication of a custom nasal prosthesis. Key considerations included anatomical accuracy, symmetry, and color matching to ensure a natural appearance. …”
Get full text

3D Printed Multi‐Cavity Soft Actuator with Integrated Motion and Sensing Functionalities via Bio‐Inspired Interweaving Foldable Endomysium by Zhonggui Fang, Shaowu Tang, Yinyin Su, Xiaohuang Liu, Sicong Liu, Juan Yi, Zheng Wang, Jian S. Dai

“…A bio‐inspired interweaving foldable endomysium (BIFE) is introduced to construct and reinforce the multicavity chamber with optimized purposive foldability, enabling 3D printing single‐material fabrication. Performing elongation, contraction, and bidirectional bending, the McFI actuator senses its spatial position, orientation, and axial force, based on the kinematic and sensing models built on multi‐cavity pressures. …”
Get full text

Assessment of the performance of Ni carbon nanotube nano composite coatings and activated carbon for diesel exhaust treatment by Gamal E. M. Nasr, Magdy A. Baiomy, A. Z. Taieb, Mayada E. Abdel Razek, Mohamed Refai

“…This study aimed to design and fabricate a unit that simulates diesel engine emissions and tests various purification materials. …”
Get full text

The Effect of Post-Deposition Heat Treatment on the Microstructure, Texture, and Mechanical Properties of Inconel 718 Produced by Hybrid Wire-Arc Additive Manufacturing with Inter-... by Dmitrii Panov, Gleb Permyakov, Stanislav Naumov, Vladimir Mirontsov, Egor Kudryavtsev, Liying Sun, Alexander Aksenov, Nikita Stepanov, Dmitriy Trushnikov, Gennady Salishchev

“…The microstructure, texture, and mechanical properties of Inconel 718 fabricated via hybrid wire-arc additive manufacturing (WAAM) with inter-pass forging, and the subsequent modified post-deposition heat treatment (PDHT), were investigated. …”
Get full text

Theoretical and experimental investigations of the CMOS compatible Pirani gauges with a temperature compensation model by Shizhen Xu, Gai Yang, Junfu Chen, Rui Jiao, Ruoqin Wang, Hongyu Yu, Huikai Xie, Xiaoyi Wang

“…To improve performance, a T-type device with a 1 µm gap was fabricated resulting in an average sensitivity of 1.10 V/lgPa, which was 2.89 times larger than that (0.38 V/lgPa) of a L-type device with a 100 µm gap. …”
Get full text

Structural and Optical Properties of Amorphous Al2O3 Thin Film Deposited by Atomic Layer Deposition by Shuzheng Shi, Shuo Qian, Xiaojuan Hou, Jiliang Mu, Jian He, Xiujian Chou

“…The outstanding optoelectronic properties and facile fabrication of Al2O3 films amorphous structure can be extended to other similar oxides, which could display wide applications in various engineering and industrial fields.…”
Get full text