Exact Free Vibration Analysis for Plate Built-Up Structures under Comprehensive Combinations of Boundary Conditions by Xiang Liu, Chen Xie, Han-cheng Dan

“…The results show that the DSM gives exact results with as much as 100-fold computational efficiency advantage over the commercial finite element method. Besides, benchmark results are also provided.…”
Get full text

Free Vibration Characteristics of Moderately Thick Spherical Shell with General Boundary Conditions Based on Ritz Method by Bing Hu, Cong Gao, Hang Zhang, Haichao Li, Fuzhen Pang, Jicai Lang

“…The validity of the proposed method is proved by comparing the results of the same condition with those obtained by the finite element method (FEM) and published literatures. …”
Get full text

Structural edge damage detection based on wavelet transform and immune genetic algorithm by Jianwei Zhao, Zhuo Zhou, Deqing Guan, Liang Gong

“…The two-stage method’s effectiveness was validated through finite element simulations of fixed beam and frame structures, as well as vibration tests of fixed and cantilever beams, for locating and assessing edge damage. …”
Get full text

Research on Dissipation and Fatigue Capacity of Nonstiffener Shear Panel Dampers by Ji-long Li, Ya-nan Tang, Xuan-ming Liu

“…By monotonic cyclic loading, hysteretic performance of the 15 mm thick core-board nonstiffener shear panel damper is tested, and the test shows that the damper has a superior hysteretic performance. Using finite element analysis software ABAQUS, and taking height to thickness ratio of the core-board as variable, the qualitative analysis on the damper is carried out, and results show that the critical height to thickness ratio of shear panel damper is between 30 and 35. …”
Get full text

Wind-Induced Coupling Vibration Effects of High-Voltage Transmission Tower-Line Systems by Meng Zhang, Guifeng Zhao, Lulu Wang, Jie Li

“…A three-dimensional finite element model of a 500 kV high-voltage transmission tower-line coupling system is built using ANSYS software and verified with field-measured data. …”
Get full text

Numerical Simulation of First-Order Surface Reaction in Open Cavity Using Lattice Boltzmann Method by Cristian Yoel Quintero-Castañeda, María Margarita Sierra-Carrillo, Arturo I. Villegas-Andrade, Javier Burgos-Vergara

“…The lattice Boltzmann method (LBM) is a finite element and finite volume method for studying the reaction rate, mass diffusion and concentration of species. …”
Get full text

Multicrack Localization in Rotors Based on Proper Orthogonal Decomposition Using Fractal Dimension and Gapped Smoothing Method by Zhiwen Lu, Dawei Dong, Shancheng Cao, Huajiang Ouyang, Chunrong Hua

“…A two-disc rotor-bearing system with breathing cracks is established by the finite element method and simulated sensors are distributed along the rotor to obtain the steady-state transverse responses required by POD. …”
Get full text

Accuracy Verification of Magnetic Resonance Imaging (MRI) Technology for Lower-Limb Prosthetic Research: Utilising Animal Soft Tissue Specimen and Common Socket Casting Materials by Mohammad Reza Safari, Philip Rowe, Arjan Buis

“…Additionally, MRI images of the residual limb could be used as an input data for CAD-CAM technology and finite element studies. However, the accuracy of MRI when socket casting materials are used has to be defined. …”
Get full text

Biomechanical Stress and Strain Analysis of Mandibular Human Region from Computed Tomography to Custom Implant Development by Rafael Ferreira Gregolin, Cecília Amelia de Carvalho Zavaglia, Ruís Camargo Tokimatsu, João A. Pereira

“…The evaluation of efforts in the TMJ region due to the forces of mastication was made using the finite element method and the results were corroborated by comparison with mandibular models studied in similar works.…”
Get full text

Model for Electrical Field Distribution in the Human Esophagus during Stimulation with Patch and Ring Electrodes by Christina Brock, Romulus E. Lontis, Flemming H. Lundager, Peter Kunwald, Asbjørn M. Drewes, Hans Gregersen

“…Electrical field distribution in esophageal layers (mucosa, muscle layers, and surrounding tissue) was computed using a finite element model based on a 3D model. Each layer was assigned different electrical properties. …”
Get full text

Failure Diagnosis for Demagnetization in Interior Permanent Magnet Synchronous Motors by Takeo Ishikawa, Naoto Igarashi, Nobuyuki Kurita

“…This paper investigates the influence of demagnetization by using several methods: the 3D finite element analysis (FEA) of the motor, the measurement of high-frequency impedance, and the measurement and FEA of the stator voltage and current under vector control. …”
Get full text

Mechanism of Forming Low Resistivity in Shale Reservoirs by Jirong Xie, Jiahuan He, Keming Zhou, Zhijuan Tang, Manfei Chen, Tingting He, Mengwen Zou, Tao Luo, Nong Li, Li Wang

“…Moreover, the resistivity in low-resistivity laminations of shale was measured through the finite element simulation. In addition, the reasons for such low resistivity in shale were analyzed according to the resistivity-forming mechanism, and the effects of penetration degree, width, quantity, and spatial distribution of the laminations on the resistivity were worked out. …”
Get full text

Mechanical Performance and Design Method of Improved Lead Shear Damper with Long Stroke by Baoshun Wang, Weiming Yan, Haoxiang He

“…The paper presents experimental study on an improved plate lead shear damper with long stroke (ILSD-LS) which is developed to meet the engineering requirements for high-rise structures with long periods subjected to the long-period earthquakes. Finite element analysis is also carried out to investigate the proposed damper. …”
Get full text

Investigation of support structure configurations for selective laser melting of In718 by Yi Nie, Chenlong Xu, Zhongkui Liu, Lihang Yang, Tianqi Li, Yinfeng He

“…A coupled thermo-structural finite element simulation using ANSYS was performed to evaluate the temperature, deformation, and thermal stress evolution during the printing process of the three supported cantilever structures. …”
Get full text

Numerical simulation of thermal barrier coating in gas turbine combustion chamber liner: a comparative study of YSZ and PSZ by S M Taseen Wahid, Rashidun Nessa Chowdhury, Jurana Monjur, Muammer Din Arif

“…This study investigates the potential of Yttria-Stabilized Zirconia (YSZ) and Partially Stabilized Zirconia (PSZ) thermal barrier coatings (TBCs) in improving gas turbine performance through a theoretical simulation. Using the finite element method, we compared temperature and thermal flow distributions within YSZ and PSZ coated combustion chambers against an uncoated Ni substrate liner wall. …”
Get full text

Vibration and Dynamic Response of Buffering Devices during the Vertical Feeding of Coal Mine Solid Backfill Materials by Feng Ju, Zequan He, Meng Xiao, Peng Huang, Shuai Guo

“…Based on the characteristics of the vertical feeding system, the functional characteristics of buffering devices were analyzed and a buffering device was designed in this paper. The finite element models for the buffering device were established by using the ANSYS software, and the dynamic response and mode characteristics of these models were studied. …”
Get full text

Optimization Analysis of Automotive Asymmetric Magnetic Pole Permanent Magnet Motor by Taguchi Method by Wenchao Zhang, Liwei Shi, Kaiwen Liu, Lintao Li, Jianning Jing

“…The optimized parameter combination is obtained by the Taguchi method. Finite element simulation analysis and prototype test are carried out for the optimized motor structure. …”
Get full text

Fatigue Crack Propagation Behavior of RC Beams Strengthened with CFRP under High Temperature and High Humidity Environment by Dongyang Li, Peiyan Huang, Guang Qin, Xiaohong Zheng, Xinyan Guo

“…J-integral of a central crack in the strengthened beam under three-point bending load was calculated by ABAQUS. In finite element model, simulation of CFL-concrete interface was based on the bilinear cohesive zone model under hot-wet environment and indoor atmosphere. …”
Get full text

Demonstration of two qubit entangling gates in a 2D ring resonator based coupler architecture by Anirban Bhattacharjee, Panya Jain, Jay Deshmukh, Srijita Das, Madhavi Chand, Meghan P. Patankar, R. Vijay

“…We demonstrate pairwise coupling between three fixed-frequency transmon qubits connected to the ring resonator with measured coupling strengths (4.70 MHz, 2.80 MHz, and 2.65 MHz) in good agreement with those predicted from finite-element simulations. We implement an all-microwave controlled phase (CPHASE) gate between a pair of qubits with a gate time of 196 ns and demonstrate a two-qubit Bell state with a measured state fidelity of $$F = 0.88$$ . …”
Get full text

Experimental Study on the Softening Characteristics of Sandstone and Mudstone in Relation to Moisture Content by Gui-chen Li, Chong-chong Qi, Yuan-tian Sun, Xiao-lin Tang, Bao-quan Hou

“…An underground roadway excavation is simulated by dynamic finite element modeling to analyze the effect of moisture content on the stability of the roadway. …”
Get full text