Comprehensive Evaluation to a Prefabricated Building for Indoor Environment and Energy Consumption by Zhen Yang, Xiang Li, Xuekai Zhang, Qingwei Chen

“…Take the hot-summer and cold-winter region as an example, the distribution of the indoor temperature, air velocity, and the emission characteristics of indoor polluted particles are explored via ANSYS Fluent software. And the energy supply system for the prefabricated auxiliary building, as well as system operation performances and cost components, is studied. …”
Get full text

Combined Experimental and CFD Investigation of the Parabolic Shaped Solar Collector Utilizing Nanofluid (CuO-H2O and SiO2-H2O) as a Working Fluid by Ketan Ajay, Lal Kundan

“…Flow rates of 40 LPH and 80 LPH are used. ANSYS FLUENT 14.5 is used for carrying out CFD investigation. 3D temperature distribution of absorber tube is obtained using numerical investigation and the result is compared with the experimental one. …”
Get full text

Genesis Analysis and Stability Evaluation of Karst Area in the Mudengdong Village Based on the Geological Investigation and Numerical Simulation Methods by Hanhua Xu, Kuiming Liu, Wenlian Liu, Chun Zhu, Sitao Zhu, Jiaxiang Dong

“…Finally, the finite element software ANSYS is used to comprehensively study the karst problem. …”
Get full text

Effect of the Size and Position of a Damping Ditch on the Reduction of the Blasting Vibration by Baofu Duan, Shizhan Shen, Guoshan Ta, Kebin Sun, Wei Hou, Li Gu

“…The simulation software ANSYS/LS-DYNA was used to simulate the vibration propagation of damping ditches with different depths, widths, and positions. …”
Get full text

Novel static calculation approach for reciprocal structures assembled by Archimedes paving curved rods by XIA Yongqiang, XU Yimin, NI Keyi, XIAO Nan, FAN Lei, SONG Fangyuan, JIN Hui

“…Finally, a quadrilateral curved rod reciprocal frame and a curved rod reciprocal structure transformed from the 63 type of Archimedes paving are studied respectively by proposed method and finite element method with ANSYS software. Results shows that the error rate of the nodal forces and nodal displacements between the numerical simulation and the theoretical calculation is less than 5%. …”
Get full text

Comprehensive and Validated Computational Investigations of Structural Integrity, Aerodynamic Behavior, and Its Turbulence Characteristics on Agricultural Drone with and without Pa... by Beena Stanislaus Arputharaj, Shyam Sundar Jayakumar, Senthil Kumar Solaiappan, Vijayanandh Raja, Parvathy Rajendran, Maheswari Krishnamoorthy, Hari Prasath Jeyaraj, Senthil Kumar Madasamy, Ragavendra Thaiyan Rajendran, Ali Mahmood Ahmed

“…Eddy formation and the subsequent pressure drag developments on the AD are simulated using the province computational tool Ansys Fluent. Velocity profiles of fluid variations over the AD are studied after estimating vertical takeoff, vertical landing, and forward speed conditions for various flexible payloads equipped with MRUAV models. …”
Get full text

Numerical Simulation of Empty-Hole Effect during Parallel-Hole Cutting under Different In Situ Stress Conditions by Zhengyu Wu, Dayou Luo, Feng Chen, Wulin Huang

“…To uncover the impact of in situ stress field on empty-hole effect during parallel-hole cutting, the distribution and the trend of changes in dynamic stress around empty hole during blasting under different in situ stress conditions are simulated based on the basic model for parallel-hole cutting using 3D finite element analysis software ANSYS/LS-DYNA and implicit-explicit analysis method. …”
Get full text

Nucleus Disc Replacement: Design and Material Selection FEA Analysis by Amparo Vanaclocha, Vicente Vanaclocha, Carlos M. Atienza, Pablo Clavel, Pablo Jorda-Gomez, Carlos Barrios, Nieves Saiz-Sapena, Leyre Vanaclocha

“…We created eighteen designs with varied materials and analyzed them with FEA in compression and shear tests in a lumbar spine model programmed in Ansys Parametric Design Language. Results. Bionate® 80A had the closest mechanical characteristics to the intact disc nucleus. …”
Get full text

Exact Dynamic Characteristic Analysis of Steel-Concrete Composite Continuous Beams by Qikai Sun, Nan Zhang, Guobing Yan, Xinqun Zhu, Xiao Liu, Wangwang Li

“…The proposed method is verified by comparing its results with those obtained by ANSYS software and laboratory tests. Then, the influencing factors on the reduction of natural frequency are analyzed and discussed in detail using the proposed method. …”
Get full text

Effect of Blade Number on Internal Flow and Performance Characteristics in Low-Head Cross-Flow Turbines by Ephrem Yohannes Assefa, Asfafaw Haileselassie Tesfay

“…Simulations were performed using ANSYS CFX, incorporating steady-state conditions, a two-phase flow model with a movable free surface, and a shear stress turbulence model. …”
Get full text

Straightening trajectory of hooked fibers in the fiber transport channel of rotor spinning investigated by fluid solid coupled simulation by Fengyan Li, Dingtiao Zhang, Qianru Wang, Baoming Zhou, Fang Qiu

“…To study the straightening process of hooked fiber in the fiber transport channel, Altair EDEM 2022 software was used to establish flexible fiber models, and combined with ANSYS Fluent 2022R1 simulation software, the fluid-solid coupling method was used to simulate the air velocity distribution in the fiber transport channel and the straightening process of the hooked fibers in the airflow field. …”
Get full text

Finite-Element Analysis of Oscillations in Damaged Pipeline Sections Reinforced With a Composite Material by Arman Moldagaliyev, Nurlan Zhangabay, Marco Bonopera, Talzhan Raimberdiyev, Shairbek Yeshimbetov, Seraliyev Galymzhan, Yermek Anarbayev

“…This work treats a finite-element analysis of the oscillations in damaged pipeline sections reinforced with a composite wrap performed by ANSYS software when the thickness of the composite wrap was 2.0, 3.0, and 4.0 mm, while the length of the wrap was 400, 600, and 800 mm, respectively. …”
Get full text

Development of Vacuum Vessel Design and Analysis Module for CFETR Integration Design Platform by Chen Zhu, Minyou Ye, Xufeng Liu, Shenji Wang, Shifeng Mao, Zhongwei Wang, Yi Yu

“…Specifically, the software OPTIMUS provides the approach to integrate the CAD/CAE software such as CATIA and ANSYS and form a design/analysis workflow for the vacuum vessel module. …”
Get full text

Environmental, Economic and Exergy Analysis of a Parabolic Trough Solar Collector with Finned Absorber Tube by Farhad Vahidinia, Alireza Aghaei, Hossein Khorasanizadeh

“…The fluid flow is simulated using Ansys-Fluent software. Environmental analysis was done using the life cycle method, and economic analysis was based on the levelized cost of energy. …”
Get full text

Thermal Distribution Mapping and Its Role in Informing Fatigue Life Predictions of FRP Patrol Vessels by Rachman Daudy Kevinaura, Zubaydi Achmad, Ismail Abdi, Ariesta Rizky Chandra, Pratikno Herman, Putra Nicky Rahmana, Murwatono Totok Triputrastyo

“…Thermal simulations using Ansys Steady State Thermal and Finite Element Analysis (FEA) identified critical zones on the vessel. …”
Get full text

Computational numerical analysis of drag force on a standard AeroDesign wing in accordance with winglet application by Hygor Vaz de Souza Barbosa, Júlio Cesar Costa Campos, Antonio Marcos de Oliveira Siqueira, Caio Vieira Hilário, Natália de Oliveira Faria, Bruno de Almeida Dias, Pedro Henrique Barbosa Contin Moreira

“…The methodology employed was a simulation using the ANSYS CFX® software for wings modeled with different winglet configurations and the same boundary conditions to verify the best application for the studied wing. …”
Get full text

New Method for Analyzing the Flutter Stability of Hingeless Blades with Advanced Geometric Configurations in Hovering by Si-wen Wang, Jing-long Han, Quan-long Chen, Hai-wei Yun, Xiao-mao Chen

“…The structural analysis tool is the commercial software ANSYS. The comparisons of the obtained results against those in the literatures show the capabilities of the MDLM and the method of structural analysis. …”
Get full text

Analysis of the Vibration and Chatter Stability of a Tapered Composite Boring Bar by Chunjin Zhang, Yongsheng Ren, Shujuan Ji, Jinfeng Zhang

“…Second, this paper verifies the effectiveness of the AMDM by using the ANSYS software. Moreover, this paper studies the natural frequency of the boring bar model under various situations. …”
Get full text

The impact of different compression ratios on emissions, and combustion characteristics of a biodiesel engine by Hussein A. Mahmood, Ali O. Al-Sulttani, Hayder A. Alrazen, Osam H. Attia

“…The combustion process of the biodiesel fuel inside the engine was simulated utilizing ANSYS Fluent v16 (CFD). On AV1 diesel engines (Kirloskar), numerical simulations were conducted at 1500 rpm. …”
Get full text

Design and Analysis of a Heat Exchanger for Irish Potato Pasteurization and Boiling. by Ssesanga, Edgar

“…Additionally, the integration of design considerations for engineering detailing as well as simulation using ANSYS software and modeling using Solidworks. The findings underscore the significance of tailoring the STHE design to specific steam generation needs, considering factors like fluid properties, thermal load, and operational constraints. …”
Get full text