Theoretical and Numerical Research on V-Cut Parameters and Auxiliary Cuthole Criterion in Tunnelling by Xiaoming Lou, Bao Wang, En Wu, Mingwu Sun, Ping Zhou, Zhenchang Wang

“…Meanwhile, the theoretical solution was verified by numerical modelling with ANSYS/LS-DYNA. Moreover, the field implementation of the V-cut and the auxiliary hole effectively improved the blasting effect in both efficiency and economy.…”
Get full text

Performance Analysis of Wind-Induced Piezoelectric Vibration Bimorph Cantilever for Rotating Machinery by Gongbo Zhou, Houlian Wang, Zhencai Zhu, Linghua Huang, Wei Li

“…The experiment showed that the voltage amplitude generated by the piezoelectric bimorph cantilever beam can reach the value simulated in ANSYS, which is suitable for actual working conditions.…”
Get full text

Performance Analysis of MIMO Antenna Design with High Isolation Techniques for 5 G Wireless Systems by Suverna Sengar, Praveen Kumar Malik, Puneet Chandra Srivastava, Kiran Srivastava, Anita Gehlot

“…Simulated results are shown for each of the techniques to compare their performance by using Ansys HFSS simulations which confirm that the designed antenna meets the target band requirements and could be used in 5 G communications.…”
Get full text

Damage of Rock Mass by Double-Hole Blasting with Slit Charge and Development of Stress Wave under High In Situ Stress by Jianyu Zhang, Zegong Liu, Shigui Fu, Guodong Qiao

“…The implicit-display coupling method of ANSYS/LS-DYNA is used to numerically simulate the double-hole blasting of the slit charge under two-way equal pressure and two-way different pressures. …”
Get full text

Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force by Bo You, Zhifeng Lou, Yi Luo, Yang Xu, Xiaodong Wang

“…The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. …”
Get full text

Wind Load Analysis on Temporary Scaffolding Structures in High-Altitude Venues Based on Numerical Simulation: A Case Study From the 2022 Beijing Olympics by Ming-hong Sun, Lei Zhang, Xu-yang Li, Xiao-guang Li, Qing-wen Li

“…This study evaluated its performance under a wind speed of 33 m/s using ANSYS Workbench. The result show that the maximum wind speed of Model A is 55 m/s, which occurs at the connection between the channel plate and the stand plate. …”
Get full text

Design and finite element analysis of an extractor machine for castor oil biodiesel production by Linus Adache Adache, Taye Stephen Mogaji, Mohammed Olabanji Olayinka, Zephaniah Ayodeji Olagoke

“…With a total load distribution of 729 kN resulting from the screw shaft and the weight of other accessories, the behaviour of the frame material under different loading conditions was stated. Solidworks/Ansys analysis of the screw shaft showed a maximum stress distribution of 0.52599 MPa, which is below the yield strength of 460 MPa for the material used. …”
Get full text

Influence of Base Rock Deterioration on Tunnel Bottom Structure Damage under Train Excitation by Zi-Qiang Li, Wei-Wei Huang, Zheng Li, Jian-Wen Feng, Hang Zhang, Qi Li

“…Combined with data from long-term field monitoring and discrete element analysis, after clarifying the law of bedrock deterioration, the Fuyingzi Tunnel of Zhangtang Railway in China is taken as the research object of fatigue damage. ANSYS Workbench simulation software was used to compare further and analyze the influence of three characteristic deterioration stages of the surrounding rock on the basement structure damage. …”
Get full text

Analysis of Process Variables via CFD to Evaluate the Performance of a FCC Riser by H. C. Alvarez-Castro, E. M. Matos, M. Mori, W. Martignoni, R. Ocone

“…All the conditions considered were solved using a solver ANSYS CFX 14.0. The different operation process variables and hydrodynamic effects of the industrial riser of a fluid catalytic cracking (FCC) are evaluated. …”
Get full text

Seismic Response Characteristics of Stabilizing Pile Based on Elastic-Plastic Analysis by Honglue Qu, Ying Liu, Hao Luo, Huanguo Hu, Qindi Hu

“…Based on elastic-plastic analysis, the seismic response characteristics and the influence of different section sizes, material strengths, and peak ground motion acceleration (PGA) were analyzed by ANSYS 3D. Resultantly, the elastic-plastic fourth-order tensor Cijklep was deduced, which can be used to calculate plastic strain of stabilizing pile under loading. …”
Get full text

Structural Optimization Design of Automobile Windshield Heating Furnace Based on Workbench by Anheng Wang, Tao Wang, Chuanwen Ling, Hui Wang, Xiang Zhao, Wentao Zhu

“…In order to improve the heat condition in the glass forming process, the steady‐state thermal module of the finite element analysis software ANSYS Workbench is used to simulate the thermal forming process of the automotive front gear glass, and the influence of the specific heat of the front gear glass at rising temperature, the coefficient of thermal expansion, the coefficient of radiation heat transfer, and other parameters on the forming accuracy are studied. …”
Get full text

From Antenna Design to High Fidelity, Full Physics Automotive Radar Sensor Corner Case Simulation by Ushemadzoro Chipengo, Peter M. Krenz, Shawn Carpenter

Get full text

Adiabatic Temperature Rise Test of Cemented Sand and Gravel (CSG) and Its Application to Temperature Stress Prediction of CSG Dam by Minmin Jiang, Xin Cai, Xingwen Guo, Qinghui Liu, Tianye Zhang

“…The proposed model is implanted into the ANSYS software platform for predictions of temperature distributions and stress fields of a typical CSG dam. …”
Get full text

Fatigue life prediction of the drilling mast for rotary drilling rig using an improved hybrid algorithm by Heng Yang, Qing Lu, Yuhang Ren, Gening Xu, Wenxiao Guo, Qianbin Geng

“…Finally, the life prediction of the drill mast of a rotary drill rig is accomplished based on the dataset established by ANSYS and compared with other life prediction models. …”
Get full text

ANALYSIS OF SHRINKAGE PERFORMANCE OF U-SHAPED RUBBER OUTER WINDSHIELD OF HIGH-SPEED TRAIN AT LOW TEMPERATURE by GU Cheng, XU Lei, YU Chengtao, WANG Jiazheng

“…Based on the low temperature tensile test data of the rubber, Ansys software was used to fit the Mooney-Rivlin hyperelastic constitutive model of rubber material parameters, and the thermo-solid coupling simulation was carried out on the U-shaped rubber outer windshield according to three real working conditions, and the influence of different working conditions on the U-shaped rubber deformation was studied.The low temperature test was carried out on U-shaped rubber outer windshield and three rubber samples with different batten thicknesses， the influence of temperature and batten thickness on its deformation was studied.The results show that the U-shaped rubber deformation is mainly caused by the temperature change, the U-shaped rubber height decreases obviously, and the shape variable of the side wall thickness and the rubber length is small.In addition, the batten thickness has a greater influence on the rubber shape variable at the bolt hole.Compared with the batten of 5 mm and 6 mm thickness, the 4 mm batten produces a larger deformation under the bolt preload action, resulting in a larger deformation at the bolt hole, and then increasing the batten thickness can effectively reduce the hole removal risk.Comparing the finite element simulation data with the low temperature test results, it is found that the two results are basically consistent，which indicates the finite element analysis feasibility and the low temperature test reliability.The research results provide some guidance basis for the U-shaped rubber outer windshield under low temperature application reliability.…”
Get full text

Orientation effect of arc array horizontal tubes inside a phase change storage unit on melting and solidification characteristics by Mohamed A. Alnakeeb, Mohaned M. El-Bashouty, Mostafa M. Zaytoun, Medhat M. Sorour

“…A two-dimensional numerical model is created using the ANSYS-FLUENT 17.2 software. The current numerical model validation is achieved by comparing it with previously published study experimental data, demonstrating a strong agreement between the present model results and the earlier experimental findings. …”
Get full text

Design and Simulation of a Solar Thermal Dryer for Fruits. by Amanya, Sylus

“…Steady-state thermal and fluent analyses were performed with the help of the ANSYS workbench 2024 R1 software to study the behavior of the absorber plate, solar collector, and trays.…”
Get full text

Modeling and simulation of magnet-coil arrays for vibrational energy harvesting in agricultural electric vehicles by Mbanwei Divine Kobbi, Njimboh Henry Alombah, Ngwa Martin Ngwabie

“…The modeling, excitement, and analysis were conducted using ANSYS Maxwell software with four configurations under similar conditions. …”
Get full text

Life prediction analysis of patrol vessel made from FRP with variations of wave height and wave direction by Octaviano Noel, Zubaydi Achmad, Ismail Abdi, Ariesta Rizky Chandra, Pratikno Herman, Rahmana Putra Nicky, Triputrastyo Murwatono Totok

“…The bending moment is in an Ansys static structural analysis to calculate stress and deformation. …”
Get full text

Performance Investigation of Air Velocity Effects on PV Modules under Controlled Conditions by Muzaffar Ali, Muhammad Hasan Iqbal, Nadeem Ahmed Sheikh, Hafiz M. Ali, M. Shehryar Manzoor, Muhammad Mahabat Khan, Khairul Fikri Tamrin

“…Afterwards, the thermal analysis of the modules was performed using Ansys-Fluent in which junction temperature and heat flux of modules were determined by applying appropriate boundary conditions, such as air velocity, heat flux, and solar radiation. …”
Get full text