All-dielectric carpet cloaks with three-dimensional anisotropy control by Maegawa Yuki, Nakata Yosuke, Sanada Atsushi

“…The designed cloak is fabricated by stereolithography 3-D printing technology and its cloaking performances are evaluated experimentally at 10 GHz. …”
Get full text

Metamaterial-based injection molding for the cost-effective production of whole cuts by Mohammad Ghosheh, Avner Ehrlich, Amit Fischer, Laura Pasitka, Merav Cohen, Yaakov Nahmias

“…Moreover, technical economic analysis shows injection molding is more cost-effective than 3D printing, costing $9/kg compared to $38/kg. This research represents a step in sustainable food production, offering cost-effective and scalable solutions for the entire meat market.…”
Get full text

Thermosetting Coupling Analysis and Parameter Optimization of the Plastic Lining Pump Structure by Lingfeng Tang, Mingwei Liu, Feihong Ma

“…The influence situation and the best combination parameters under the condition of evaluation index, taking the minimum displacement deformation and minimum stress of impeller as the reference index, and the optimum combination parameters under the condition of minimum displacement and stress were as follows: the inlet diameter D1 was 76 mm, the outlet diameter D2 was 252 mm, the inlet angle was 26°, the outlet angle was 24°, and the wrap angle was 115°. Finally, the 3D printing technology was used to print out the physical model to the hydraulic performance experiment verification.…”
Get full text

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure by Emad Kadum Njim, Hussam Raad Hasan, Muhsin J. Jweeg, Muhannad Al-Waily, Alaa Ali Hameed, Ahmed M. Youssef, Fahmi M. Elsayed

“…Three core structures: composite core structure and then the core is replaced by a structure of a closed and open repeating cellular pattern manufactured with 3D printing technology. It finally integrated both into one hybrid open-cell core filled with foam and employed the same device (WBW-100E) to conduct the three-point bending experiment. …”
Get full text

Evaluation of the Fit of Additively and Subtractively Produced Resin-Based Crowns for Primary Teeth Using a Triple-Scan Protocol by Nagehan Aktaş, Cenkhan Bal, Ceyda Başak İnal, Esra Kaynak Öztürk, Merve Bankoğlu Güngör

“…Methods: A total of 30 crowns were produced with additive (3D printing; DLP and SLA) and subtractive (milling) technologies (<i>n</i> = 10). …”
Get full text

A Robust License Plate Detection and Character Recognition Algorithm Based on a Combined Feature Extraction Model and BPNN by Fei Xie, Ming Zhang, Jing Zhao, Jiquan Yang, Yijian Liu, Xinyue Yuan

Get full text

Bioprinting 3D lattice-structured lumens using polyethylene glycol diacrylate (PEGDA) combined with self-assembling peptide nanofibers as hybrid bioinks for anchorage dependent cel... by Vishalakshi Irukuvarjula, Faye Fouladgar, Robert Powell, Emily Carney, Neda Habibi

“…Here, we utilized a hybrid bioink by combining self-assembled peptide nanofibers with PEGDA for 3D printing lumens. Adult human dermal fibroblast (aHDF) cells were first seeded in peptide-laden in 2D and 3D layers and cell behavior were studied. …”
Get full text

Optimal Printing and Post-Processing Modes of Polymer Products Manufactured Using SLA-Technology of Additive Мanufacturing by T. A. Pratasenia, A. P. Kren

“…Using the samples of the high-temperature photopolymer resin High Temp RS-F2-HTAM-01, the possibility of optimizing 3D printing methods and post-processing modes based on dynamic indentation data is shown. …”
Get full text

3D printable and myoelectrically sensitive hydrogel for smart prosthetic hand control by Jinxin Lai, Longya Xiao, Beichen Zhu, Longhan Xie, Hongjie Jiang

“…In this study, we developed myoelectrically sensitive hydrogels via 3D printing and integrated them into a stretchable, flexible, and high-density sEMG electrodes array. …”
Get full text

Innovative design and experimental verification of cam shedding for high-speed looms by Haifei Qiu, Ming Chen, Feiyang Li, Yifan Zhang

“…Furthermore, an experimental proportional model was produced using 3D printing technology and tested for motion performance at varying rotational speeds, verifying the design's theoretical accuracy and practical feasibility, indicating that this mechanism runs smoothly and reliably in lifting and returning the heald frame by cam; meanwhile, the yarn deformation and shed characteristics are apparent, meeting the requirements of the shedding weaving process of plain fabric. …”
Get full text

The effect of different fabrication techniques on porosity of cobalt-chromium cast removable partial denture farm works. by Fryad Mustafa Rasheed, Rizgar Mohammed Ameen Hasan

“…Conclusions: Within the limitations of this study, although both 3D-printing and CAD/CAM methods of framework fabrication revealed clinically acceptable adaptation, the conventional cast RPD groups revealed less overall porosity. …”
Get full text

A Precessing-Coin-like Rotary Actuator for Distal Endoscope Scanners: Proof-of-Concept Study by Nirvana Gharib, Mohammad Reza Yousefi Darestani, Kenichi Takahata

“…The first proof-of-concept is developed using 3D printing and experimentally analyzed to reveal the ability of both angular stepping at 45° and high-speed rotation up to 1500 rpm within the biologically safe temperature range, a key function for multimodal imaging. …”
Get full text

Comparison of marginal fit between milled and three-dimensional printed polymethylmethacrylate prostheses for single crowns, anterior bridges, and pier abutment bridges: An in vitr... by Aman Merchant, Kiran Kumar Pandurangan, Amrutha Dinesh Shenoy, Deepak Nallaswamy, Pooja Nilesh Singh

“…Aim: The purpose of this in vitro study was to compare the marginal fit of various three-dimensional (3D) printed and milled polymethylmethacrylate (PMMA) dental prostheses. …”
Get full text

Validation of mixed reality in planning orbital reconstruction with patient-specific implants by K. Dubron, E. Shaheen, R. Jacobs, C. Politis, R. Willaert

“…A crossover study design was used to compare MR technology with conventional three-dimensional (3D) printing approaches in the planning of maxillofacial traumatology treatments. …”
Get full text

Experimental Study on Sand Inrush Hazard of Water-Sand Two-Phase Flow in Broken Rock Mass by Junce Xu, Hai Pu, Jiarui Chen, Ziheng Sha

“…Also, the seepage fracture channels in the broken rock mass were simplified by using the 3D printing technology, and the effects of fracture aperture and angle on the seepage characteristics of water-sand mixtures were analyzed. …”
Get full text

Application of Additive Manufacturing and Deep Learning in Exercise State Discrimination by Zhilong Zhao, Jiaxi Yang, Jiahao Liu, Shijie Soong, Yiming Wang, Juan Zhang

“…To address these challenges, this paper introduces 3D printing and deep learning to design a smart wearable sensing device to detect different states of sports fatigue. …”
Get full text

Feature analysis aided design of lightweight heat sink from network structures by Tianlin Luo, Changliang Zhu, Baowen Li, Xiangying Shen, Guimei Zhu

“…These novel configurations provide thermal dissipation capabilities equivalent to conventional designs while substantially reducing weight. We utilized 3D printing to manufacture these designs and confirmed their effectiveness through experimental validation. …”
Get full text

Influence of roller characteristics on powder layer applying in additive technologies by Valery M. Bogdanov

“…However, to improve the 3D printing productivity, it is impossible to increase simply the speed of the squeegee without changing its shape or type. …”
Get full text

RESEARCH ON MECHANICAL PROPERTIES OF GRADIENT LATTICE STRUCTURES BASED ON VORONOI METHOD (MT) by LIN Wei, YANG FengShuang, SHI YingYu

“…The lattice structures were fabricated by 3D printing technology, and the mechanical compression experiment was carried out to verify the finite element analysis results. …”
Get full text

Investigation and prediction of fatigue performance of SLM 316 L stainless steel based on small build orientation variations and heat treatment effects by Andrei Yankin, Asma Perveen, Didier Talamona

“…Abstract Additive manufacturing (3D printing) has facilitated the creation of complex structures, including lattices with diverse build angles. …”
Get full text