An effective process for simultaneous extraction of valuable metals (V, Cr, Ti, Fe, Mn) from vanadium slag using acidic sodium chlorate solution under water bath conditions

In the present work, a novel process for effective extraction of valuable metals (V, Cr, Ti, Mn, Fe, Al, and Mg) from the vanadium slag is proposed. The leaching parameters for valuable metals extraction from the vanadium slag by acidic sodium chlorate solution were studied to obtain conditions for...

Full description

Saved in:
Bibliographic Details
Main Authors: Liu S.Y., Shen S.B., Chou K.C.
Format: Article
Language:English
Published: University of Belgrade, Technical Faculty, Bor 2018-01-01
Series:Journal of Mining and Metallurgy. Section B: Metallurgy
Subjects:
Online Access:http://www.doiserbia.nb.rs/img/doi/1450-5339/2018/1450-53391800003L.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In the present work, a novel process for effective extraction of valuable metals (V, Cr, Ti, Mn, Fe, Al, and Mg) from the vanadium slag is proposed. The leaching parameters for valuable metals extraction from the vanadium slag by acidic sodium chlorate solution were studied to obtain conditions for vanadium to be leached without using a pyro metallurgical step since the roasting process requires high energy consumption. The optimal H2SO4 concentration, weight ratio of NaClO3 to sample, leaching time, leaching temperature, agitation speed and ratio of liquid volume to solid mass were 6 M, 0.2, 6 h, 95℃, 200 rpm and 10, respectively. Under these optimal conditions, the extraction ratio of vanadium and valuable metals (V, Cr, Ti, Mn, Fe, Al, and Mg) were 85.8% and 91.2%, respectively. Compared with salt roasting, this process could simultaneously extract valuable metals from vanadium slag. More importantly, the experimental temperature was low underwater bath conditions.
ISSN:1450-5339
2217-7175