Solidus Temperature in Optimization and Prediction of Alloy Mild Steel in Tungsten Inert Gas Weldment

Solidus Temperature in Optimization and Prediction of Alloy Mild Steel in Tungsten Inert Gas Weldment

Show other versions (2)

Solidus temperature indicates the temperature at which an alloy is completely solid it is considered as an important parameters of alloy in Tungsten Inert Gas (TIG) welding. Therefore, the objective of this paper was to investigate the solidus temperature in the optimization and prediction of alloy...

Full description

Saved in:

Bibliographic Details
Main Authors:	A. O. Igbinake, C. O. Aliyegbenoma
Format:	Article
Language:	English
Published:	Joint Coordination Centre of the World Bank assisted National Agricultural Research Programme (NARP) 2025-04-01
Series:	Journal of Applied Sciences and Environmental Management
Subjects:	Solidus; temperature; weldment; tungsten inert gas; mild steel; desirability
Online Access:	https://www.ajol.info/index.php/jasem/article/view/293732
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Solidus Temperature in Optimization and Prediction of Alloy Mild Steel in Tungsten Inert Gas Weldment
by: A. O. Igbinake, et al.
Published: (2025-04-01)

Solidus Temperature in Optimization and Prediction of Alloy Mild Steel in Tungsten Inert Gas Weldment
by: A. O. Igbinake, et al.
Published: (2025-04-01)

Low and High Gas Tungsten Arc Welding Heat Inputs Influence on Corrosion of Stainless Steel Weldments
by: Bolarinwa Johnson Kutelu, et al.
Published: (2024-09-01)

Prediction of Convective Heat Transfer Coefficient in Tungsten Inert Gas Welding
by: O. Ikponmwosa-Eweka, et al.
Published: (2024-11-01)

Evaluation of Mechanical Characteristics of Tungsten Inert Gas (TIG) Welded Butt Joint of Inconel 600
by: Arash Moradi, et al.
Published: (2025-05-01)

Microstructure and properties degradation of P/T 91, 92 steels weldments in creep conditions
by: Falat L., et al.
Published: (2012-01-01)

The ESTPHAD Concept: An Optimised Set of Simplified Equations to Estimate the Equilibrium Liquidus and Solidus Temperatures, Partition Ratios, and Liquidus Slopes for Quick Access to Equilibrium Data in Solidification Software Part II: Ternary Isomorphous Equilibrium Phase Diagram
by: Gergely Kőrösy, et al.
Published: (2025-07-01)

Multi-point inerter array and rotation invariance of regular polygon inerter array
by: Yuehao Li, et al.
Published: (2025-09-01)

Multi-point estimation weldment recognition and estimation of pose with data-driven robotics design
by: Meng XiangYi
Published: (2025-04-01)

Microstructure and mechanical properties of 7075 aluminum alloy welds by gas tungsten arc welding with trailing ultrasonic rotating extrusion
by: Rongtao Zhu, et al.
Published: (2024-11-01)

Experimental Investigation of Hydrogen Embrittlement in Post-Fire Q690 Weldments
by: Xu-Yang Wang, et al.
Published: (2025-03-01)

A Comparison Study of High-Temperature Low-Cycle Fatigue Behaviour and Deformation Mechanisms Between Incoloy 800H and Its Weldments
by: Wenjing Li, et al.
Published: (2024-11-01)

TAGUCHI METHOD APPLIED FOR THE INVESTIGATION OF CORROSION LEVEL ON METAL INERT GAS WELDING OF MILD STEEL
by: Nanang Fatchurrohman, et al.
Published: (2022-09-01)

Enhancement of material properties of SS 316 L base metal by TIG cladding process
by: Varun Kumar A., et al.
Published: (2024-12-01)

The influence of light on corrosion of polyaniline coated mild steel
by: Milica M. Gvozdenović, et al.
Published: (2016-12-01)

A Brief Review of the Impact of Neutron Irradiation Damage in Tungsten and Its Alloys
by: Adil Wazeer, et al.
Published: (2024-12-01)

Seismic Performance Assessment of Optimal Tandem-Based Tuned Mass Damper Inerters
by: Maziar Fahimi Farzam, et al.
Published: (2025-04-01)

Effects of helium irradiation damage on deuterium plasma-driven permeation through tungsten coated RAFM steel
by: Yue Xu, et al.
Published: (2025-01-01)

Strength-ductility enhancement in high-Mn TWIP steel welded joints via optimized gas tungsten arc welding
by: Xingfu Wang, et al.
Published: (2025-05-01)

Device topology optimization for an inerter-based structural dynamic vibration absorber
by: Ruihong Xie, et al.
Published: (2024-12-01)

DEFINING THE BOUNDARIES OF THE TWO-PHASE ZONE OF CARBON AND ALLOY STEELS
by: S. M. Kabishov, et al.
Published: (2015-11-01)

Mechanisms of destruction of monocore tungsten wire and tungsten harness plastically deformed under uniaxial loading
by: S.V. Lebediev, et al.
Published: (2022-04-01)

DOCTOR INERTNESS AS A FACTOR DISTURBING EFFECTIVE TREATMENT OF CARDIOVASCULAR DISEASES
by: E. V. Minakov, et al.
Published: (2016-01-01)

Enhancing corrosion resistance of AISI 4130 steel through optimized HVOF tungsten carbide coatings
by: Amirhossein Moghanian, et al.
Published: (2025-01-01)

THE ROMAN METROPOLIS CARNVNTVM REVEALS MORE GOLD COINS
by: Cristian Gazdac, et al.
Published: (2019-07-01)

Electrochemical and Gravimetric Investigation of the Corrosion Inhibition Performance of Clindamycin for Mild Steel in Acidic Media
by: A.A. Bamigbola, et al.
Published: (2024-12-01)

TMD-Inerter for Tall Building Damping: Approximate Closed-Form Solution, Performance and Conclusions
by: Felix Weber
Published: (2025-05-01)

Studing Tungsten-containing Electroerosion Powders and Alloys Synthesized from Them
by: E.V. Ageev, et al.
Published: (2014-07-01)

The inhibition of mild steel corrosion by papaya and neem extracts
by: Paulinus Chukwudi Agu, et al.
Published: (2023-09-01)

Corrosion protection of mild steel using nanomaterials coating
by: Prasad Lokanathudu Mohan, et al.
Published: (2023-12-01)

The Study Of The Efficiency Of (NALCO 23214) Substance Added To The Cooling Towers At The Northern General Company For The Manufacture Of Fertilizer As Corrosive Inhibitor For (Mild Steel) Alloy
by: Salih A. Ahmed, et al.
Published: (2023-02-01)

Comparative study of AA6061 and AA6063 aluminum alloy coating on mild steel using friction surfacing
by: Gautam Chandra Karar, et al.
Published: (2025-05-01)

Effect of vibration frequency on mechanical properties and microstructure of metal inert gas welded dissimilar AA5083 and AA6061 aluminum alloy joints
by: Saifudin, et al.
Published: (2024-12-01)

Microstructure and corrosion resistance of pyrolyzed Mg – ZnO thin film coatings on mild steel
by: Victor Adewale Owoeye, et al.
Published: (2025-04-01)

Optimizing Laser Cutting Parameters for Enhanced Surface Quality in Mild and Stainless Steel: An Experimental Study
by: Rita de Cássia Mendonça Sales‐Contini, et al.
Published: (2025-07-01)

Structural Reliability of Tall Buildings Under Wind Loads with Tuned Mass Damper Fluid Inerters
by: Cáelán McEvoy, et al.
Published: (2025-05-01)

Effect of bonding time on the interfacial microstructure and mechanical properties of diffusion bonded tungsten alloy/steel joints using CrFeCoNiCu high entropy alloy interlayer
by: Shangru Meng, et al.
Published: (2024-11-01)

Synthesis and Characterization of an Innovative Polymer Surfactant as a Corrosion Inhibitor for Mild Steel in Hydrochloric Acid
by: Narjes Ibrahem Khaled, et al.
Published: (2025-06-01)

Research into the Production of Tungsten Heavy Alloys with Specific Mechanical Properties
by: Paweł SKOCZYLAS, et al.
Published: (2019-12-01)

The impact of hot roll temperature on the microstructure and corrosion resistance of super duplex stainless steel, which is used to coat mild steel in seawater environments
by: Naffat L., et al.
Published: (2025-01-01)