Effect of Titanium Carbide Particles on Mechanical Properties of Aluminum Matrix Composites
In this research aluminum matrix composites (AMCs) was reinforced by titanium carbide (TiC) particles and was produced. Powder metallurgy technique (PM) has been used to fabricate AMCs reinforced with various amounts (0%, 4%, 8%, 12%, 16% and 20% volume fraction) of TiC particles to study the effec...
Saved in:
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wasit University
2017-10-01
|
| Series: | Wasit Journal of Engineering Sciences |
| Subjects: | |
| Online Access: | https://ejuow.uowasit.edu.iq/index.php/ejuow/article/view/55 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In this research aluminum matrix composites (AMCs) was reinforced by titanium carbide (TiC) particles and was produced. Powder metallurgy technique (PM) has been used to fabricate AMCs reinforced with various amounts (0%, 4%, 8%, 12%, 16% and 20% volume fraction) of TiC particles to study the effect of different volume fractions on mechanical properties of the Al-TiC composites. Measurements of compression strength and hardness showed that mechanical properties of composites increased with an increase in volume fraction of TiC Particles. Al-20 % vol. TiC composites exhibited the best properties with hardness value (97HRB) and compression strength value (275Mpa).
|
|---|---|
| ISSN: | 2305-6932 2663-1970 |