Multiparametric Study of Water–Gas Shift and Hydrogen Separation Performance in Membrane Reactors Fed with Biomass-Derived Syngas

A multiparametric study was conducted on a hydrogen (H<sub>2</sub>) production rig designed to process 0.25 Nm<sup>3</sup>·h<sup>−1</sup> of syngas. The rig consists of two Pd-Ag membrane permeator units and two Pd-Ag membrane reactor units for the water–gas shift...

Full description

Saved in:
Bibliographic Details
Main Authors: Nadia Cerone, Luca Contuzzi, Giuseppe Domenico Zito, Carmine Florio, Laura Fabbiano, Francesco Zimbardi
Format: Article
Language:English
Published: MDPI AG 2025-01-01
Series:Hydrogen
Subjects:
Online Access:https://www.mdpi.com/2673-4141/6/1/6
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:A multiparametric study was conducted on a hydrogen (H<sub>2</sub>) production rig designed to process 0.25 Nm<sup>3</sup>·h<sup>−1</sup> of syngas. The rig consists of two Pd-Ag membrane permeator units and two Pd-Ag membrane reactor units for the water–gas shift (WGS) reaction, enabling a detailed and comprehensive analysis of its performance. The aim was to find the optimal conditions to maximize hydrogen production by WGS and its separation in a pure stream by varying the temperature, pressure, and steam-to-CO ratio (S/CO). Two syngas mixtures obtained from an updraft gasifier using different gasification agents (air–steam and oxy–steam) were used to investigate the effect of gas composition. The performance of the rig was investigated under nine combinations of temperature, pressure, and S/CO in the respective ranges of 300–350 °C, 2–8 bar, and 1.1–2 mol·mol<sup>−1</sup>, as planned with the help of design of experiment (DOE) software. The three parameters positively affected performance, both in terms of capacity to separate a pure stream of H<sub>2</sub>, reported as moles permeated per unit of surface area and time, and in producing new H<sub>2</sub> from WGS, reported as moles of H<sub>2</sub> produced per volume of catalyst unit and time. The highest yields were obtained using syngas from oxy–steam gasification, which had the highest H<sub>2</sub> concentration and was free of N<sub>2</sub>.
ISSN:2673-4141