Influence of Light-Curing Time and Increment Thickness on the Properties of Bulk Fill Composite Resins With Distinct Application Systems

Influence of Light-Curing Time and Increment Thickness on the Properties of Bulk Fill Composite Resins With Distinct Application Systems

The objective of this study was to evaluate the influence of light-curing time and increment thickness on the microhardness and degree of conversion (DC) of bulk fill composite resins with different application systems. Translucency parameter (TP) was also measured. Specimens of resin composites wer...

Full description

Saved in:

Bibliographic Details
Main Authors:	Carlos Rocha Gomes Torres, Taiana Paola Prado, Daniele Mara da Silva Ávila, Cesar Rogério Pucci, Alessandra Bühler Borges
Format:	Article
Language:	English
Published:	Wiley 2024-01-01
Series:	International Journal of Dentistry
Online Access:	http://dx.doi.org/10.1155/2024/2123406
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion
by: Sayna Shamszadeh, et al.
Published: (2016-01-01)

Cuspal Displacement Induced by Bulk Fill Resin Composite Polymerization: Biomechanical Evaluation Using Fiber Bragg Grating Sensors
by: Alexandra Vinagre, et al.
Published: (2016-01-01)

Physical and Mechanical Properties of Bulk-Fill, Conventional, and Flowable Resin Composites Stored Dry and Wet
by: Dana Jafarpour, et al.
Published: (2022-01-01)

Experimental study of polishing systems on surface roughness and color stability of novel bulk-fill composite resins
by: Seda Nur Karakaş, et al.
Published: (2025-01-01)

Effect of Two Different Ultrafast Curing Exposure Durations on the Surface Hardness of Bulk Fill Composite - An In-Vitro Study
by: Shekar Shobana, et al.
Published: (2023-10-01)

Micro-computed tomographic assessment of the influence of light-curing modes on internal void formation in bulk-fill composites
by: Özge Gizem Yenidünya, et al.
Published: (2024-05-01)

Depth-Dependent Cellular Response from Dental Bulk-Fill Resins in Human Dental Pulp Stem Cells
by: Su-Min Lee, et al.
Published: (2019-01-01)

Pre-heating decreases micro-leakage of bulk fill composite resins in dentin margins of class II cavities: an in-vitro study
by: Mahmoud Bahari, et al.
Published: (2024-05-01)

Evaluation of impact strength of heat cure and chemical cure acrylic resin denture base material
by: Ahmed Saleh Hamadameen
Published: (2022-12-01)

Curing modes affects micro-tensile bond strength and durability of dual curing resin cements to dentin
by: Zimeng Li, et al.
Published: (2025-01-01)

Curing and Degradation Kinetics of Phosphorus-Modified Eugenol-Based Epoxy Resin
by: Danuta Matykiewicz, et al.
Published: (2025-01-01)

Wear Resistance of Light-Cure Resin Luting Cements for Ceramic Veneers
by: Miyuki Oshika, et al.
Published: (2024-12-01)

Evaluation of Polymerization Shrinkage and Depth of Cure of Silorane Based Composite Resin and Methacrylate Based Composite Resin (Comparative Study)
by: Diyar kh Bakr
Published: (2018-12-01)

ADDITION OF RICE HUSK NANOCELLULOSE TO THE IMPACT STRENGTH OF RESIN BASE HEAT CURED
by: Muhammad Aditya Ramadhan Hasran, et al.
Published: (2021-03-01)

Effect of addition of silver nanoparticles on flexural and impact strength of heat cure acrylic resin
by: Ranj A. Omer, et al.
Published: (2019-12-01)

Current Noise of Resin Type and Cermet Type Thick Film Resistors
by: Tien-Shou Wu, et al.
Published: (1980-01-01)

Effect of Ethylmethacrylate and Isobutylmethacrylate on Surface Hardness and Surface Roughness of Heat-Cure Ocular Acrylic Resins
by: Hiba Munaf Hadi, et al.
Published: (2021-12-01)

Abrasive resistance and microhardness of self-adhesive (Surefil one) and conventional bulk fill composites: An- in vitro study.
by: Maryam Fakher Ibrahim, et al.
Published: (2023-12-01)

The Effect of Different Exposure Times on Some Properties of Three Types Visible Light Cured Acrylic Resins
by: Abdullqadir Qadir, et al.
Published: (2018-06-01)

Treatment of a Vertical Root Fracture Using Dual-Curing Resin Cement: A Case Report
by: Nima Moradi Majd, et al.
Published: (2012-01-01)

Green LED as an Effective Light Source for Curing Acrylate-Based Dental Resins in Combination with Irgacure 784
by: Katalin Bukovinszky, et al.
Published: (2018-01-01)

Polymerization Efficiency of a Dual-Cured Resin Cement through Zirconia with Three Different Cusp Inclinations
by: Chang-Yuan Zhang, et al.
Published: (2018-01-01)

The Effect Of Photo-Activation Method in Polymerization Process Of Different Light-Cured Composite Resins On Hardness And Compression
by: ايناس غازي يونس, et al.
Published: (2024-12-01)

The Influence of Thickness on the Mechanical Behaviors of 3D Printing Resins for Orthodontic Retainers
by: Theerasak Nakornnoi, et al.
Published: (2024-01-01)

Effects of Gigantochloa apus String Bamboo Fiber Brushes on Heat-Cured Acrylic Resin Plate Surface Roughness
by: Azkya Patria Nawawi, et al.
Published: (2025-01-01)

Thin Resistive Thick-Film Layers Based on Precious Metal Resinate/Glass Systems
by: P. Prinsen
Published: (1978-01-01)

Gamma-ray attenuation characteristics of polypropylene filled with nano-sized and bulk Bi2O3 and CuO
by: Gouda Mona M., et al.
Published: (2024-01-01)

A Study on the Influence of the Forming Strategy on the Main Strains, Thickness Reduction, and Forces in a Single Point Incremental Forming Process
by: Adrian Blaga, et al.
Published: (2013-01-01)

In Vitro Comparison of the Effect of Three Types of Heat-Curing Acrylic Resins on the Amount of Formaldehyde and Monomer Release as well as Biocompatibility
by: Homeira Ansari lari, et al.
Published: (2022-01-01)

Real-time non-destructive characterization of epoxy resin curing kinetics and mechanical response for enhanced manufacturing quality control
by: Gonzalo Seisdedos, et al.
Published: (2025-02-01)

Linear dimensional changes and surface hardness of acetal resin in different periods of artificial saliva immersion in comparison with heat cure acrylic.
by: Sura S. Khalid, et al.
Published: (2022-12-01)

In vitro Evaluation of Repair Bond Strength to Bulk-fill Composites Using Two Silane-Free Universal Adhesives, with and without Silane Application
by: Alara AKSOY, et al.
Published: (2025-01-01)

Evaluation of Flexure Strength of Heat Cure Acrylic Resin Reinforcement with Nano Al2O3 After Polishing with Different Abrasive Materials
by: Nihad AlFuraiji, et al.
Published: (2023-06-01)

A Study on Axial Compression Performance of Large Diameter-Thickness Ratio Concrete-Filled Gas Drainage Steel Pipe
by: Zi-Lu Liu, et al.
Published: (2021-01-01)

Incremental Fuzzy Clustering Based on Feature Reduction
by: Yongli Liu, et al.
Published: (2022-01-01)

Coexistence of the Bandcount-Adding and Bandcount-Increment Scenarios
by: Viktor Avrutin, et al.
Published: (2011-01-01)

Power analysis of dyadic increment (DI) statistic
by: Danas Zuokas
Published: (2004-12-01)

Metasurface-Cladded Waveguide Filled With Magnetized Plasma
by: Mirko Magarotto, et al.
Published: (2025-01-01)

Understanding the post-curing behaviors of polymethylacrylimide: Curing kinetics and molecular mobility
by: Yuan Chen, et al.
Published: (2025-02-01)

Fortis-lenis distinction of fricatives and plosives in Welsh – Phonetically distinctive factors
by: Michał Baran
Published: (2020-12-01)