Characterization of Liquefaction Products from Lignocellulosic and Aquatic Biomass
Biomass liquefaction is a promising thermochemical route to convert lignocellulosic residues into bio-oil. This study evaluates the liquefaction behavior of 13 biomasses with varying particle sizes (0.3–2.0 mm) and moisture contents (5–11%) under mild solvolysis conditions. High-performance liquid c...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-06-01
|
| Series: | Biomass |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2673-8783/5/2/36 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Biomass liquefaction is a promising thermochemical route to convert lignocellulosic residues into bio-oil. This study evaluates the liquefaction behavior of 13 biomasses with varying particle sizes (0.3–2.0 mm) and moisture contents (5–11%) under mild solvolysis conditions. High-performance liquid chromatography (HPLC-RID) and thermogravimetric analysis (TGA) were used to characterize bio-oil composition and biomass properties, respectively. Maximum conversion (72%) was achieved for Miscanthus, while <i>Ulva lactuca</i> reached only 23% due to its low carbohydrate content. Hemicellulose-rich feedstocks showed higher yields, whereas high lignin content generally reduced conversion. Furfural was the main compound identified in the aqueous phase (up to 51 g/L), reflecting extensive pentose degradation. Laboratory and industrial-scale liquefaction of cork and eucalyptus revealed scale-dependent differences. Industrial cork bio-oil showed increased xylose (0.70 g/L) and furfural (0.40 g/L), while industrial eucalyptus exhibited elevated levels of acetic (0.46 g/L) and formic acids (0.71 g/L), indicating enhanced deacetylation and demethoxylation reactions. These findings offer valuable insights for optimizing feedstock selection and process conditions in biomass liquefaction. The valorization of lignocellulosic residues into bio-oil contributes to the development of scalable, low-carbon technologies aligned with circular economy principles and bio-based industrial strategies. |
|---|---|
| ISSN: | 2673-8783 |