Enhanced Photodecomposition of Methylene Blue in Water with Sr1−xKxTiO3−δ@PC-polyHIPEs under UV and Visible Light
Photocatalytic method was investigated to remove water pollutant methylene blue (MB) produced in textile, plastic, and dye industries. PC-polyHIPEs were prepared by light-induced polymerization of dopamine in transparent polyHIPEs which were synthesized by polymerization within high internal phase e...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2018-01-01
|
| Series: | Journal of Chemistry |
| Online Access: | http://dx.doi.org/10.1155/2018/9365147 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Photocatalytic method was investigated to remove water pollutant methylene blue (MB) produced in textile, plastic, and dye industries. PC-polyHIPEs were prepared by light-induced polymerization of dopamine in transparent polyHIPEs which were synthesized by polymerization within high internal phase emulsions. Sr1-xKxTiO3-δ (x = 0–0.5) nanoparticles were incorporated and adhered to PC-polyHIPEs to form Sr1-xKxTiO3-δ@PC-polyHIPEs for the first time. The catalysts were characterized by XRD, FTIR, TGA, UV-Vis DRS, and SEM and their photocatalytic properties for MB decomposition were measured over UV-Vis spectrometer. The PC-polyHIPEs were of interconnected porous structure with around 100 μm pores and 30 μm windows. Sr1−xKxTiO3−δ@PC-polyHIPEs showed excellent MB decomposition activity under either UV or visible light although Sr1−xKxTiO3−δ alone worked only under UV light. When x = 0.3, Sr1−xKxTiO3−δ@PC-polyHIPEs showed the highest photocatalytic performance due to the existence of more oxygen vacancies. When the water solution with 50 mg L−1 MB and 1.6 gcat. L−1 Sr0.7K0.3TiO3−δ@PC-polyHIPEs was exposed to visible light for 160 min at room temperature, 88.3% of MB was decomposed. After being used for eight cycles, 87.6% activity of fresh Sr0.7K0.3TiO3−δ@PC-polyHIPEs still remained. The influences of salinity, temperature, and catalyst concentration on the catalytic activity were studied. For MB decomposition under visible light, the activation energy of Sr0.7K0.3TiO3−δ@PC-polyHIPEs was calculated to be 12.3 kJ mol−1 and the kinetics analysis revealed that the photocatalysis followed the second-order reaction. These findings demonstrated that Sr1−xKxTiO3−δ@PC-polyHIPEs were an effective candidate for real application in decomposition of MB in water. |
|---|---|
| ISSN: | 2090-9063 2090-9071 |