Erratum: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age

Erratum: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age

Saved in:

Bibliographic Details
Main Author:	Frontiers Production Office
Format:	Article
Language:	English
Published:	Frontiers Media S.A. 2024-12-01
Series:	Frontiers in Materials
Subjects:	curing age MLP LSTM strength prediction economic analysis
Online Access:	https://www.frontiersin.org/articles/10.3389/fmats.2024.1532906/full
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age
by: Yueying Zhang, et al.
Published: (2024-11-01)

Comparison of polymerization behaviors, microhardness and compressive strength between bulk-fill resin and dual-cured core resin
by: Hye Jeong Kim, et al.
Published: (2025-07-01)

Correction: Advanced low-thermal fortification strategy for dill juice: enhanced bioaccessibility and functional properties through MLP-RSM optimization
by: Frontiers Production Office
Published: (2025-08-01)

The Efficiency of Membrane Curing Method in Hydration Temperature, Compressive Strength, and Curing Cost of Concrete
by: Hossein Bakhshi, et al.
Published: (2024-04-01)

Vinipel Curing: A Sustainable Approach to Enhanced Concrete Durability and Strength
by: Joeel Bolaño, et al.
Published: (2025-02-01)

Improvements in manufacturability, bonding strength, and curing efficiency of a silicone adhesive
by: Ye Yang, et al.
Published: (2024-11-01)

Temperature-regulated ammonium carbonate curing of steel slag: Enhanced carbonation, strength, and CO2 mineralization for sustainable building materials
by: Ziping Pan, et al.
Published: (2025-09-01)

The influence of particle size and curing conditions on testing mineral trioxide aggregate cement
by: William Nguyen Ha, et al.
Published: (2016-12-01)

Curing modes affects micro-tensile bond strength and durability of dual curing resin cements to dentin
by: Zimeng Li, et al.
Published: (2025-01-01)

A Multipurpose hybrid forecasting framework for economic stress scenarios: evidence from agriculture and energy sectors
by: Hiridik Rajendran, et al.
Published: (2025-08-01)

Impact of light-curing distance on the effectiveness of cure of bulk-fill resin-based composites
by: Rana Abdelbaset Diab, et al.
Published: (2021-12-01)

Experimental study on fracture properties of steam-cured high-strength concrete
by: Xiaoqian Wang, et al.
Published: (2025-01-01)

PREDICTING USD/ TL EXCHANGE RATE IN TURKEY: THE LONG-SHORT TERM MEMORY APPROACH
by: Abdul-razak Bawa Yussif, et al.
Published: (2023-08-01)

The effect of touch-cure polymerization on the push-out bond strength of fiber posts
by: Raghad S. Jamel, et al.
Published: (2024-04-01)

LABORATORY STUDY OF STRENGTH CHARACTERISTICS GLASS-FIBER REINFORCED LIGHT-CURED COMPOSITE
by: O. A. Udod, et al.
Published: (2019-03-01)

Combined effect of compressing fresh concrete and curing regime on bonding performance of high strength repair mortar
by: Parisa Bahri, et al.
Published: (2024-11-01)

AI for Predicting Pavement Roughness in Road Monitoring and Maintenance
by: Christina Plati, et al.
Published: (2025-06-01)

Walking Back the Data Quantity Assumption to Improve Time Series Prediction in Deep Learning
by: Ana Lazcano, et al.
Published: (2024-11-01)

Effect of Two Different Ultrafast Curing Exposure Durations on the Surface Hardness of Bulk Fill Composite - An In-Vitro Study
by: Shekar Shobana, et al.
Published: (2023-10-01)

The Impact of Incorporating Boron Nitride Nano-Particles as Reinforcement into Heat-Cured Acrylic Soft Denture Lining Material on Tear and Shear Bond Strength to Acrylic Denture Base Material: An in Vitro Study
by: Rasha Fahmi Shittran, et al.
Published: (2025-01-01)

Research Progress on Effects of Antifreeze Components, Nanoparticles and Pre-Curing on the Properties of Low-Temperature Curing Materials
by: Xianhua Yao, et al.
Published: (2025-01-01)

The Effect of Different Light Curing Units and Tip Distances on Translucency Parameters of Bulk fill Materials
by: Dana Al-Senan, et al.
Published: (2022-07-01)

Evaluation of Flexure Strength of Heat Cure Acrylic Resin Reinforcement with Nano Al2O3 After Polishing with Different Abrasive Materials
by: Nihad AlFuraiji, et al.
Published: (2023-06-01)

Explainable machine learning model for predicting compressive strength of CO2-cured concrete
by: Jia Chu, et al.
Published: (2025-07-01)

Erratum: Novel bio-inspired soft actuators for upper-limb exoskeletons: design, fabrication and feasibility study
by: Frontiers Production Office
Published: (2024-11-01)

Investigation of the Compressive Strength of Fly Ash and GGBFS-Based Geopolymer Concretes According to Local Materials and Curing Conditions in Southern Iraq
by: noor munther
Published: (2024-12-01)

Effects of Different Curing Methods on the Quality of Stinky Mandarin Fish
by: Xiaoqian ZOU, et al.
Published: (2025-07-01)

Contribution of fly ash to mortar strength development under steam and internal curing
by: Ryo Insako, et al.
Published: (2022-03-01)

Effect of curing and silanizing on composite repair bond strength using an improved micro-tensile test method
by: Sigfus Thor Eliasson, et al.
Published: (2017-01-01)

Long-term development of mechanical properties of concrete with different water to cement ratio and internal curing ability
by: Vlastimil Bilek, et al.
Published: (2025-01-01)

Fast curing ethylene vinyl acetate films with dual curing agent towards application as encapsulation materials for photovoltaic modules
by: W-H. Ruan, et al.
Published: (2014-02-01)

Structure Formation and Curing Stage of Arbolite–Concrete Composites Based on Iron-Sulfur Binders
by: Baizak Isakulov, et al.
Published: (2025-07-01)

Comparative evaluation of the effect of reinforced basalt fibre and glass fibre on flexural strength of heat-cured denture base resin: an in vitro study
by: Karan Bharvada, et al.
Published: (2025-03-01)

CO₂ reactor-curing for early-strength MgO-based cementitious systems
by: Gonzalo Mármol, et al.
Published: (2025-07-01)

Improving stock price forecasting with M-A-BiLSTM: a novel approach
by: Zihan Liu
Published: (2025-06-01)

Application of deep learning for coherent pixel selection in time series InSAR for urban area and transport infrastructure monitoring
by: S. Azadnejad, et al.
Published: (2025-08-01)

A comparative analysis on the use of a cellular automata Markov chain versus a convolutional LSTM model in forecasting urban growth using sentinel 2A images
by: Reda Yaagoubi, et al.
Published: (2024-12-01)

Curing simulation and data-driven curing curve prediction of thermoset composites
by: Chenchen Wu, et al.
Published: (2024-12-01)

Towards a better binder for pervious concrete: A case study on the flexural strength of fibre-reinforced high-strength cementitious paste (F-HSCP) under different curing conditions
by: Jie Li, et al.
Published: (2025-12-01)

Investigation of Salt and Water Diffusion During Dry Salting, Wet Curing, and Ultrasonic Wet Curing
by: Sándor Fekete, et al.
Published: (2025-05-01)