The Nonlinear Stability Prediction and FEM Modeling of High-Speed Spindle System with Joints Dynamic Characteristics
When predicting the nonlinear stability of high-speed spindle system, it is necessary to create an accurate model that reflects the dynamic characteristics of the whole system, including the spindle-bearing joint and spindle-holder-tool joints. In this paper, the distribution spring model of spindle...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2014-01-01
|
| Series: | Shock and Vibration |
| Online Access: | http://dx.doi.org/10.1155/2014/153504 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | When predicting the nonlinear stability of high-speed spindle system, it is necessary to create an accurate model that reflects the dynamic characteristics of the whole system, including the spindle-bearing joint and spindle-holder-tool joints. In this paper, the distribution spring model of spindle-holder-tool joints was built with the consideration of its dynamic characteristics; the five-DOF dynamic model of the angle contact ball bearing was also established to study the influence of speed and preload on the spindle-bearing joint, both of which were used in the general whole complete spindle system FEM model. The rationality of the model was verified by comparison with the FRF of traditional rigid model and experiments. At last, the influences of speed and cutting force on the nonlinear stability were analyzed by amplitude spectrum, bifurcation, and Poincaré mapping. The results provided a theoretical basis and an evaluating criterion for nonlinear stability prediction and product surface quality improvement. |
|---|---|
| ISSN: | 1070-9622 1875-9203 |