Creep data sheet for Nickel-based 19Cr-18Fe-3Mo-5Nb-Ti-Al superalloy

Creep data sheet for Nickel-based 19Cr-18Fe-3Mo-5Nb-Ti-Al superalloy

Creep data of Ni-based 19Cr-18Fe-3Mo-5Nb-Ti-Al superalloy (JIS NCF718-B) were obtained at 550°C to 750°C under 100MPa to 1000MPa and analyzed to determine the 100,000 h creep rupture strength. The tensile properties were also evaluated at room temperature to 750°C. Four heats of JIS NCF718-B were us...

Full description

Saved in:

Bibliographic Details
Main Authors:	Kota Sawada, Yasushi Taniuchi, Kaoru Sekido, Takehiro Nojima, Tomotaka Hatakeyama, Kazuhiro Kimura
Format:	Article
Language:	English
Published:	Taylor & Francis Group 2024-12-01
Series:	Science and Technology of Advanced Materials: Methods
Subjects:	Ni-based superalloy 100 000 h creep rupture strength heat-to-heat variation
Online Access:	https://www.tandfonline.com/doi/10.1080/27660400.2024.2425179
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Long-term creep properties of Ni-based 21Cr-18Fe-9Mo superalloys
by: Kota Sawada, et al.
Published: (2023-12-01)

Influence of Rejuvenation Heat Treatment on Creep Property for Nickel-Based Directionally Solidified Superalloy
by: Rongqiao Wang, et al.
Published: (2025-04-01)

DIFFERENCE OF THE CREEP RATE OF PRE-STRAINED AND NO PRE-STRAINED SUPERALLOY N07080
by: Omer Beganović, et al.
Published: (2024-12-01)

Superdislocations activated by 1200 °C creep in Ni3Al phase of a single crystal superalloy: Non-coplanar configuration and motion model
by: Wanxin Yu, et al.
Published: (2025-07-01)

Intergranular creep resistance affected by grain boundary carbides to suppress lamellae γʹ precipitation in a specially designed inconel 740H variant
by: Cheol-Hyeok Yang, et al.
Published: (2025-01-01)

Creep fracture of a nickel base single crystal superalloy along [011] orientation
by: SHUI Li, et al.
Published: (2015-05-01)

Recent Advances in Creep Modelling Using the <i>θ</i> Projection Method
by: William Harrison
Published: (2024-12-01)

On the high-temperature creep and fatigue behaviours of an advanced hot-extruded nickel-based superalloy
by: Xingyu Pan, et al.
Published: (2025-09-01)

Exceptional creep resistance of a directionally solidified superalloy: temperature-dependent evolution of microstructure and dislocations
by: Yunpeng Fan, et al.
Published: (2025-08-01)

Anisotropy in the Creep–Fatigue Behaviors of a Directionally Solidified Ni-Based Superalloy: Damage Mechanisms and Life Assessment
by: Anping Long, et al.
Published: (2025-04-01)

Stress-dependent creep behavior of a low-cost Re-free nickel-based single crystal superalloy at 980 °C
by: Yuting Gao, et al.
Published: (2025-09-01)

Superb creep lives of Ni-based single crystal superalloy through size effects and strengthening heterostructure γ/γʹ interfaces
by: Long Haibo, et al.
Published: (2023-12-01)

Effect of Alloying on the Phase composition of Nickel-Based Superalloys
by: V.L. Greshta, et al.
Published: (2025-06-01)

Microstructural Stability and Creep Behavior of a Re/Ru Single-Crystal Nickel-Based Alloy
by: Ning Tian
Published: (2025-04-01)

Different Heat Tolerance of Two Creeping Bentgrass Cultivars Related to Altered Accumulation of Organic Metabolites
by: Yong Du, et al.
Published: (2025-06-01)

Composition Optimization in Alloy Design for Nickel-Based Single Crystal Superalloy: A Review
by: Yu Zhou, et al.
Published: (2025-07-01)

Effect of pre-welding condition on liquation cracking characteristics of K439B superalloy laser welding
by: Zongli Yi, et al.
Published: (2025-05-01)

Mitigating microstructural heterogeneity in laser-directed energy deposition Ni-based superalloys by heat accumulation in-situ heat treatment
by: Chen Yang, et al.
Published: (2025-12-01)

Research progress on heat treatment regulation and mechanical properties of selective laser melted γ″-strengthened nickel-based superalloys
by: NI Xiaoqing, et al.
Published: (2025-06-01)

Effect of Heat Treatment on Microstructure and Residual Stress of a Nickel-Cobalt-Based Superalloy Produced by Laser Powder Bed Fusion
by: Chengjun Wang, et al.
Published: (2025-04-01)

Simultaneous strength optimization and recrystallization prevention in induction-heating-assisted laser additively manufactured Ni-based superalloys
by: Yizhou Zhao, et al.
Published: (2025-06-01)

Heat-induced effects and cracking susceptibility in gas tungsten arc welding of Inconel 939 superalloy using Inconel 625 filler metal
by: Amir Hossein Jafarzadeh, et al.
Published: (2025-05-01)

Automated system for high-throughput process-structure-property dataset generation of structural materials: A γ/γ′ superalloy case study
by: Thomas Hoefler, et al.
Published: (2025-08-01)

Investigation on Mechanical Properties of MAR-M247 Superalloy for Turbine Blades by Experiment and Simulation
by: Hao Lin, et al.
Published: (2024-04-01)

Amino Acid Biostimulants Enhance Drought and Heat Stress Tolerance of Creeping Bentgrass (<i>Agrostis Stolonifera</i> L.)
by: Xunzhong Zhang, et al.
Published: (2025-07-01)

Achieving the targeted regulation of gamma prime phase in the heterogeneous friction weld of highly alloyed nickel-based superalloy by electric current treatment
by: Rui Zhan, et al.
Published: (2025-06-01)

Creep rupture properties of bare and coated polycrystalline nickel-based superalloy Rene®80
by: Barjesteh M.M., et al.
Published: (2021-01-01)

Creep behavior of frozen soil and creep analytical model of frozen wall
by: ZhengDong Chen, et al.
Published: (2025-04-01)

Data and Knowledge Dual-Driven Creep Life Prediction for Austenitic Heat-Resistance Steel
by: Xiaochang Xie, et al.
Published: (2025-01-01)

The effect of cold-rolling reduction on the microstructure and mechanical properties of fine-grain IN907 superalloy sheet
by: Seyed Sajjad Babaei Sangtabi, et al.
Published: (2025-03-01)

Mechanical properties and corrosion behavior of circular oscillating laser direct energy deposited nickel-based superalloy after different heat-treatment processes
by: Yelin Xia, et al.
Published: (2025-01-01)

Heat treatment to eliminate anisotropy of microstructure and high-temperature tensile properties of GH4169 superalloy by selective laser melting
by: ZHAO Haisheng, et al.
Published: (2025-03-01)

The Influence of Zn and Ca on Tensile Properties and Creep Resistance of MgSn6 Alloy
by: T. Rzychoń
Published: (2025-06-01)

Combustion behavior of GH4169 and GH4202 superalloys in oxygen-enriched atmosphere
by: WANG Hong-liang, et al.
Published: (2016-09-01)

Transforming threats into opportunities: The role of human factors in enhancing cybersecurity
by: Silvia Colabianchi, et al.
Published: (2025-05-01)

Effect of Vacuum Brazing Conditions of Inconel 718 Superalloy Sheets on Microstructure and Mechanical Properties of Joints
by: K. Krystek, et al.
Published: (2024-06-01)

About the choice of Tungsten carbide indenter to determine mechanical properties of superalloys by using high-temperature microhardness tester
by: Bruno Passilly, et al.
Published: (2024-12-01)

A Contribution to the Study of the Integrity Surface of the IC10 Ni3Al-Based Alloy After Creep-Feed Grinding with a Focus on High-Temperature Fatigue Life
by: Shuaiqi Zhang, et al.
Published: (2024-12-01)

Achieving exceptional strength-ductility synergy in laser beam powder bed fusion René 104ScY superalloy through induced heterogeneous microstructure
by: Yazhou Zhang, et al.
Published: (2024-11-01)

Numerical Simulation of Freckle Defects in Nickel based Superalloys
by: LIU Dong rong, et al.
Published: (2020-04-01)