Microstructural evolution and wear performance of Ti662 alloy reinforced with FeCoCrCuSi high entropy alloy using microwave sintering
High Entropy alloy (HEA) is a potential reinforcement material to enhance the strength and wear behaviour of base materials through refined microstructure. In the present work, Ti6Al6V2Sn (Ti662 alloy) is reinforced with a ball-milled equimolar FeCoCrCuSi HEA by the Microwave Sintering (MS) process....
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2025-01-01
|
| Series: | Journal of Materials Research and Technology |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S223878542403014X |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | High Entropy alloy (HEA) is a potential reinforcement material to enhance the strength and wear behaviour of base materials through refined microstructure. In the present work, Ti6Al6V2Sn (Ti662 alloy) is reinforced with a ball-milled equimolar FeCoCrCuSi HEA by the Microwave Sintering (MS) process. A reduced α-Ti and improved β-Ti phases along with a single-phase BCC structure are attained in the Ti662/HEA composite. The properties of MS-processed composite are further enhanced by annealing at 900 °C for 60 min. The annealed composite exhibits refined grains with a mean of 0.414 μm. The annealed composite possesses exceptional microhardness of 796 HV, which is 3.2 and 1.6 times higher than the Ti662 alloy and Ti662/HEA composite. The pin-on-disc tribometer is used to conduct the wear analysis under varying process parameters. The reduced wear rate is attained in the Ti662/HEA annealed composite owing to the grain refinements, improved densification, and least porosity over the Ti662 alloy and Ti662/HEA composite. The wear mechanism including delamination, formation of the oxide layer, and severe grooves of annealed composite is revealed by worn surface morphology. |
|---|---|
| ISSN: | 2238-7854 |