Effect of Pressure, Post-Pressing Time, and Polymerization Cycle on the Degree of Conversion of Thermoactivated Acrylic Resin

Effect of Pressure, Post-Pressing Time, and Polymerization Cycle on the Degree of Conversion of Thermoactivated Acrylic Resin

Herein, the effect of different post-pressing times and pressure in two cycles of polymerization on the degree of conversion (DC) of thermally activated acrylic resin (TRRA) is analyzed to optimize the polymerization of this material. After post-pressing for 0, 6, or 12 h, polymerization was perform...

Full description

Saved in:

Bibliographic Details
Main Authors:	Rafaella de S. Leão, Sandra L. D. de Moraes, Kátia A. da S. Aquino, Cristina P. Isolan, Bruno G. da S. Casado, Marcos A. J. R. Montes
Format:	Article
Language:	English
Published:	Wiley 2018-01-01
Series:	International Journal of Dentistry
Online Access:	http://dx.doi.org/10.1155/2018/5743840
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Influence of Preheating Procedure and Polymerization Modes on Degree of Conversion of Contemporary Resin Composites
by: Mutlu Özcan, et al.
Published: (2025-01-01)

The Effect of Nano Hydroxyapatite on the Bond Strength of Acrylic Teeth Repaired to an Acrylic Resin Denture Base Using Two Types of Auto Polymerized Acrylic Resins
by: Hawraa khalid Aziz
Published: (2023-09-01)

The Influence of Polymerization Type and Reinforcement Method on Flexural Strength of Acrylic Resin
by: Rodrigo Borges Fonseca, et al.
Published: (2015-01-01)

Influence of Different Disinfectants on Surface Hardness of Heat-Polymerized Acrylic Resins utilized for Orthodontic Appliance
by: Wael Abdul Alrazzaq Alwaeli, et al.
Published: (2021-03-01)

Evaluation of Fluoride release from orthodontic acrylic resin by using two different polymerizations techniques: An InVitro Study
by: Diyar B. Sabir, et al.
Published: (2019-06-01)

THE STRENGTH OF TRANSVERS ACRYLIC RESIN WITH GLASS FIBER SOAKED IN TEA
by: Sujati Sujati
Published: (2021-03-01)

Comparison of Debonding of Different Composite Resin Bonds and Acrylic Tooth with Acrylic Denture Base after Thermocycling Regimes.
by: Aso M. Zangana, et al.
Published: (2024-06-01)

Resin-Modified Glass Ionomer Nanocomposite: Subcutaneous Connective Tissue Response and Polymerization Shrinkage Resistance
by: Edélcio Garcia-Júnior, et al.
Published: (2025-02-01)

THE IMMERSION OF ACRYLIC RESIN WITH INJECTION MOULDING TECHNIQUE ON LOOSE DENTURES DIMENSIONAL CHANGE
by: Endang Kusdarjanti, et al.
Published: (2019-09-01)

Effect of addition of silver nanoparticles on flexural and impact strength of heat cure acrylic resin
by: Ranj A. Omer, et al.
Published: (2019-12-01)

Comparative Analysis of Mechanized Versus Conventional Polishing Protocols for Denture Base Acrylic Resins
by: Margarida Martins Quezada, et al.
Published: (2025-01-01)

The Effect of Recycled CAD/CAM PEEK Fibers on the Transverse Strength of Repaired Acrylic Resin
by: Maha Kareem Jabbar, et al.
Published: (2023-09-01)

Evaluation of impact strength of heat cure and chemical cure acrylic resin denture base material
by: Ahmed Saleh Hamadameen
Published: (2022-12-01)

Evaluation of Some Properties of Acrylic Resin Denture Base Reinforced with Calcium Carbonate Nano-Particles
by: Jawad Mikael, et al.
Published: (2018-06-01)

Synthesis and Characterization of Nano-TiO2/SiO2-Acrylic Composite Resin
by: Bin Du, et al.
Published: (2019-01-01)

THE TECHNIQUE FOR MAKING AESTHETIC ACRYLIC RESIN REMOVABLE PARTIAL DENTURES IN AN ANTERIOR CROSS BITE CASE
by: Okti Setyowati, et al.
Published: (2022-11-01)

Evaluation of the Effect of Nano and Micro Hydroxyapatite Particles on the Impact Strength of Acrylic Resin: In Vitro Study
by: Ahmed Abdulameer Abduljabbar, et al.
Published: (2023-09-01)

Effect of Ethylmethacrylate and Isobutylmethacrylate on Surface Hardness and Surface Roughness of Heat-Cure Ocular Acrylic Resins
by: Hiba Munaf Hadi, et al.
Published: (2021-12-01)

The Effect of Different Exposure Times on Some Properties of Three Types Visible Light Cured Acrylic Resins
by: Abdullqadir Qadir, et al.
Published: (2018-06-01)

Green LED as an Effective Light Source for Curing Acrylate-Based Dental Resins in Combination with Irgacure 784
by: Katalin Bukovinszky, et al.
Published: (2018-01-01)

Evaluation of Polymerization Shrinkage and Depth of Cure of Silorane Based Composite Resin and Methacrylate Based Composite Resin (Comparative Study)
by: Diyar kh Bakr
Published: (2018-12-01)

Effects of Gigantochloa apus String Bamboo Fiber Brushes on Heat-Cured Acrylic Resin Plate Surface Roughness
by: Azkya Patria Nawawi, et al.
Published: (2025-01-01)

In Vitro Comparison of the Effect of Three Types of Heat-Curing Acrylic Resins on the Amount of Formaldehyde and Monomer Release as well as Biocompatibility
by: Homeira Ansari lari, et al.
Published: (2022-01-01)

The effects of TiO2 Nanoparticles on Flexural Strength of Self-Polymerized Resins: In Vitro Study
by: Firas Abd Kati
Published: (2022-06-01)

Linear dimensional changes and surface hardness of acetal resin in different periods of artificial saliva immersion in comparison with heat cure acrylic.
by: Sura S. Khalid, et al.
Published: (2022-12-01)

Antimicrobial and Mechanical Properties of Orthodontic Acrylic Resin Containing Zinc Oxide and Titanium Dioxide Nanoparticles Supported on 4A Zeolite
by: Mahdiyeh Esmaeilzadeh, et al.
Published: (2022-01-01)

The effect of soaking heat-polymerized acrylic resin denture base in avocado seed extract (Persea americana Mill.) on the inhibition of denture-plaque microorganisms biofilm growth [version 2; peer review: 1 approved, 2 approved with reservations, 1 not approved]
by: Siti Wahyuni, et al.
Published: (2024-10-01)

Core-shell Nanoparticles Based on Polystyrene and Poly(n-butyl acrylate) Functionalized with Itaconic Acid for Baroplastic Processing
by: Fernanda Furtado de Melo Albino, et al.
Published: (2025-01-01)

Acrylated Biopolymers Derived via Epoxidation and Subsequent Acrylation of Vegetable Oils
by: Yee Heng Ho, et al.
Published: (2022-01-01)

Bacterial Adhesion and Surface Roughness for Different Clinical Techniques for Acrylic Polymethyl Methacrylate
by: Lucas Costa de Medeiros Dantas, et al.
Published: (2016-01-01)

In Polymerization of Environment Friendly Melamine-Urea-Glyoxal Resin in Rubber Wood for Improved Physical and Mechanical Properties
by: Lijuan Ping, et al.
Published: (2021-01-01)

Polymerization Efficiency of a Dual-Cured Resin Cement through Zirconia with Three Different Cusp Inclinations
by: Chang-Yuan Zhang, et al.
Published: (2018-01-01)

The Effect Of Photo-Activation Method in Polymerization Process Of Different Light-Cured Composite Resins On Hardness And Compression
by: ايناس غازي يونس, et al.
Published: (2024-12-01)

Blood Glucose Lowering Efficacy of Strawberry Extracts Rich in Ellagitannins with Different Degree of Polymerization in Rats
by: Juśkiewicz Jerzy, et al.
Published: (2016-06-01)

Evaluation of Flexure Strength of Heat Cure Acrylic Resin Reinforcement with Nano Al2O3 After Polishing with Different Abrasive Materials
by: Nihad AlFuraiji, et al.
Published: (2023-06-01)

Correlation between shear bond strength and degree of conversion of four orthodontic adhesives.
by: Hangaw Tariq Ibrahim, et al.
Published: (2023-12-01)

A Fuzzy Set-Based Model for Educational Serious Games with 360-Degree Videos
by: Zildomar Carlos Felix, et al.
Published: (2023-01-01)

Investigation on Dielectric Properties of Press Board Coated with Epoxy Resin, Quartz, and Rice Husk Ash
by: Banumathi S., et al.
Published: (2021-01-01)

Cuspal Displacement Induced by Bulk Fill Resin Composite Polymerization: Biomechanical Evaluation Using Fiber Bragg Grating Sensors
by: Alexandra Vinagre, et al.
Published: (2016-01-01)

Effective prism diopter for strabismus measurement: Conversion from anterior Prentice position to posterior parallel position and from glass prism to acrylic prism
by: Leilei Zou, et al.
Published: (2025-02-01)