Mixed load operation in current-powered mode complex shape
The article presents the results of experimental studies of energy, technological parameters of the load in a steady state after switching in the network by the example of a mixed load with a power supply current of a complex shape connected to a power supply unit (on a physical model of an elec...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Omsk State Technical University, Federal State Autonoumos Educational Institution of Higher Education
2018-09-01
|
| Series: | Омский научный вестник |
| Subjects: | |
| Online Access: | https://www.omgtu.ru/general_information/media_omgtu/journal_of_omsk_research_journal/files/arhiv/2018/4%20(160)/47-54%20%D0%9F%D1%82%D0%B8%D1%86%D1%8B%D0%BD%D0%B0%20%D0%95.%20%D0%92.,%20%D0%9F%D1%82%D0%B8%D1%86%D1%8B%D0%BD%20%D0%94.%20%D0%92.,%20%D0%9A%D1%83%D0%B2%D0%B0%D0%BB%D0%B4%D0%B8%D0%BD%20%D0%90.%20%D0%91..pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The article presents the results of experimental studies of
energy, technological parameters of the load in a steady state
after switching in the network by the example of a mixed load
with a power supply current of a complex shape connected to a
power supply unit (on a physical model of an electric furnace of
resistance to indirect and direct heating with dark infrared emitters
and energy-saving light sources, and low-voltage electrode water
heater and energy-saving light sources). The purpose of the
work is to study the electrical modes of mixed load in the power
supply unit (electrotechnological and lighting systems) to develop
recommendations for the selection of effective modes of mixed
load operation when feeding with a complex form of current for
the development of automated control systems. It is established
that the mixed load with power supply by the current of complex
form continues to work in the effective mode after switching in
the network. To improve the efficiency of mixed load control, it
is necessary to use two control channels: on the amplitude of the
voltage (current) and on the frequency spectrum. |
|---|---|
| ISSN: | 1813-8225 2541-7541 |