Quantification of external disturbance forces in sliding microwire
Due to microscale size and infinitesimal stiffness, the undesirable surface and external forces influence the mechanical behaviors of microstructures. It hinders MEMS functions, degrades reliability, and acts as a disturbance. Since MEMS functions based on microstructure mechanical behaviors, theref...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2025-01-01
|
| Series: | Heliyon |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S2405844025003706 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1832573079573757952 |
|---|---|
| author | Fazlar Rahman M.A. Salam Akanda |
| author_facet | Fazlar Rahman M.A. Salam Akanda |
| author_sort | Fazlar Rahman |
| collection | DOAJ |
| description | Due to microscale size and infinitesimal stiffness, the undesirable surface and external forces influence the mechanical behaviors of microstructures. It hinders MEMS functions, degrades reliability, and acts as a disturbance. Since MEMS functions based on microstructure mechanical behaviors, therefore, their quantification in microstructures is vital. However, the direct quantification is costly, difficult, and requires a controlled environment and unique experimental setups. Analytical assessment is also complex because of multi-physics involvement, nonlinearity of forces, and a lack of suitable mathematical models. Numerical analysis of microstructures is performed in the absence of all disturbance forces, whereas their influences cannot be eliminated during the experiment. This study aims to quantify the sum of disturbance forces in a microwire for the push-pull sliding motion against two opposite microprobes from the difference between experimental and numerical study and incorporating adhesive and electrostatic forces from literature for a single microprobe. The effect of the nonlinearity of surface forces is counted by iterating the initial difference of forces for which the numerically predicted contact force matches the experimental one. The sum of surface and external disturbance forces in the microwire is estimated to be 0.295 μN, including external disturbances of 0.177 μN. The predicted adhesive, electrostatic, and the sum of van der Waals, capillary, and hydrogen bonding forces are 0.118034, 0.02014, and 0.097894 μN, respectively. This study will help in quantifying disturbance forces in microstructures, like microbars, microrods, microplates, etc., and the appropriate design of MEMS devices. |
| format | Article |
| id | doaj-art-615bb91c67cc46989eda9e5e416d61f0 |
| institution | Kabale University |
| issn | 2405-8440 |
| language | English |
| publishDate | 2025-01-01 |
| publisher | Elsevier |
| record_format | Article |
| series | Heliyon |
| spelling | doaj-art-615bb91c67cc46989eda9e5e416d61f02025-02-02T05:28:43ZengElsevierHeliyon2405-84402025-01-01112e41990Quantification of external disturbance forces in sliding microwireFazlar Rahman0M.A. Salam Akanda1Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh; Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh; Corresponding author. Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh.Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, BangladeshDue to microscale size and infinitesimal stiffness, the undesirable surface and external forces influence the mechanical behaviors of microstructures. It hinders MEMS functions, degrades reliability, and acts as a disturbance. Since MEMS functions based on microstructure mechanical behaviors, therefore, their quantification in microstructures is vital. However, the direct quantification is costly, difficult, and requires a controlled environment and unique experimental setups. Analytical assessment is also complex because of multi-physics involvement, nonlinearity of forces, and a lack of suitable mathematical models. Numerical analysis of microstructures is performed in the absence of all disturbance forces, whereas their influences cannot be eliminated during the experiment. This study aims to quantify the sum of disturbance forces in a microwire for the push-pull sliding motion against two opposite microprobes from the difference between experimental and numerical study and incorporating adhesive and electrostatic forces from literature for a single microprobe. The effect of the nonlinearity of surface forces is counted by iterating the initial difference of forces for which the numerically predicted contact force matches the experimental one. The sum of surface and external disturbance forces in the microwire is estimated to be 0.295 μN, including external disturbances of 0.177 μN. The predicted adhesive, electrostatic, and the sum of van der Waals, capillary, and hydrogen bonding forces are 0.118034, 0.02014, and 0.097894 μN, respectively. This study will help in quantifying disturbance forces in microstructures, like microbars, microrods, microplates, etc., and the appropriate design of MEMS devices.http://www.sciencedirect.com/science/article/pii/S2405844025003706MicrowireMEMS devicesDisturbance forceAdhesive forceSurface forceContact force |
| spellingShingle | Fazlar Rahman M.A. Salam Akanda Quantification of external disturbance forces in sliding microwire Heliyon Microwire MEMS devices Disturbance force Adhesive force Surface force Contact force |
| title | Quantification of external disturbance forces in sliding microwire |
| title_full | Quantification of external disturbance forces in sliding microwire |
| title_fullStr | Quantification of external disturbance forces in sliding microwire |
| title_full_unstemmed | Quantification of external disturbance forces in sliding microwire |
| title_short | Quantification of external disturbance forces in sliding microwire |
| title_sort | quantification of external disturbance forces in sliding microwire |
| topic | Microwire MEMS devices Disturbance force Adhesive force Surface force Contact force |
| url | http://www.sciencedirect.com/science/article/pii/S2405844025003706 |
| work_keys_str_mv | AT fazlarrahman quantificationofexternaldisturbanceforcesinslidingmicrowire AT masalamakanda quantificationofexternaldisturbanceforcesinslidingmicrowire |