The effect of lubricants with mineral additives on friction in supports of spindle assemblies
Currently, the task of increasing the reliability and wear resistance of mechanisms and machines is being solved on the basis of the use of new composite materials. The most effective method of obtaining composite materials is the use of geological activators, which are introduced into the fric...
Saved in:
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Omsk State Technical University, Federal State Autonoumos Educational Institution of Higher Education
2021-12-01
|
| Series: | Омский научный вестник |
| Subjects: | |
| Online Access: | https://www.omgtu.ru/general_information/media_omgtu/journal_of_omsk_research_journal/files/arhiv/2021/%E2%84%966%20(180)%20(%D0%9E%D0%9D%D0%92)/11-15%20%D0%98%D0%BB%D1%8C%D0%B8%D0%BD%D1%8B%D1%85%20%D0%92.%20%D0%90..pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Currently, the task of increasing the reliability and wear
resistance of mechanisms and machines is being solved
on the basis of the use of new composite materials. The
most effective method of obtaining composite materials
is the use of geological activators, which are introduced
into the friction zone of the components of mechanisms
and machines through a lubrication system, which
allows increasing the micro-moisture of the friction
surfaces up to 2,3 times, as well as reducing friction in
sliding and rolling bearings. According to the research
results, it is found that the use of repair and restoration
technologies in friction pairs leads to energy savings of
10–20 %, an increase in wear resistance by 2,5 times,
an increase in the resource of lubricants by 2,5–5
times, a significant reduction in vibration noise, as well
as an increase in the inter-repair resource by at least
2 times and a reduction in operating costs. However,
for the widespread introduction of these technologies,
additional studies are needed, which are given in this
paper. |
|---|---|
| ISSN: | 1813-8225 2541-7541 |