Experimental investigation on the formation mechanism of the TiFe alloy by the molten-salt electrolytic titanium concentrate
The ferrotitanium alloy was prepared in the molten CaCl2 system, in which resolidified ilmenite and the graphite crucible were used as cathode and anode. In this study, the electrolytic voltage was fixed at 3.1V, and three different temperatures were applied: 850oC, 875oC and 900ºC. Finally, the...
Saved in:
Main Authors: | Shi R., Bai C., Hu M., Liu X., Du J. |
---|---|
Format: | Article |
Language: | English |
Published: |
University of Belgrade, Technical Faculty, Bor
2011-01-01
|
Series: | Journal of Mining and Metallurgy. Section B: Metallurgy |
Subjects: | |
Online Access: | http://www.doiserbia.nb.rs/img/doi/1450-5339/2011/1450-53391100002S.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Deoxidization mechanism of preparation FeTi alloy using ilmenite concentrate
by: Hu M., et al.
Published: (2011-01-01) -
Thermodynamic calculations in alloys Ti-Al, Ti-Fe, Al-Fe and Ti-Al-Fe
by: Kostov Ana, et al.
Published: (2008-01-01) -
Effect of titanium content on the microstructure and wear behavior of Fe(13-x)TixB7 (x=0-5) hardfacing alloy
by: Kılınç B., et al.
Published: (2022-01-01) -
Effect of silver content on the wear and mechanical properties of powder metallurgical Ti-5Al-2.5Fe-xAg alloys
by: Yamanoglu R., et al.
Published: (2020-01-01) -
Interactions of Cu-substrates with titanium-alloyed Sn-Zn solders
by: Soares D., et al.
Published: (2006-01-01)